With this option, it is possible to require a linear commit history with
the following benefits over the next best option `Rebase+fast-forward`:
The original commits continue existing, with the original signatures
continuing to stay valid instead of being rewritten, there is no merge
commit, and reverting commits becomes easier.
Closes#24906
- In Git version v2.43.1, the behavior of `GIT_FLUSH` was accidentially
flipped. This causes Forgejo to hang on the `check-attr` command,
because no output was being flushed.
- Workaround this by detecting if Git v2.43.1 is used and set
`GIT_FLUSH=0` thus getting the correct behavior.
- Ref: https://lore.kernel.org/git/CABn0oJvg3M_kBW-u=j3QhKnO=6QOzk-YFTgonYw_UvFS1NTX4g@mail.gmail.com/
- Resolves#2333.
Replace #28849. Thanks to @yp05327 for the looking into the problem.
Fix#28840
The old behavior of newSignatureFromCommitline is not right. The new
parseSignatureFromCommitLine:
1. never fails
2. only accept one format (if there is any other, it could be easily added)
And add some tests.
(cherry picked from commit a24e1da7e9e38fc5f5c84c083d122c0cc3da4b74)
Recognise the `linguist-documentation` and `linguist-detectable`
attributes in `.gitattributes` files, and use them in
`GetLanguageStats()` to make a decision whether to include a particular
file in the stats or not.
This allows one more control over which files in their repositories
contribute toward the language statistics, so that for a project that is
mostly documentation, the language stats can reflect that.
Fixes#1672.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 6d4e02fe5f2e79fceb6cf672f6f822714db6d0fe)
(cherry picked from commit ee1ead81891d7a0d4e62e5ba89ebee9db6359e76)
(cherry picked from commit 2dbec730e875f44a1d8a53e123fef428a14add95)
When trying to find a `README.md` in a `.profile` repo, do so case
insensitively. This change does not make it possible to render readmes
in formats other than Markdown, it just removes the hard-coded
"README.md".
Also adds a few tests to make sure the change works.
Fixes#1494.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit edd219d8e9d69becb9814ab0a8359555e80fcd4f)
(cherry picked from commit 2c0105ef17b9673e6892a66aa689af7c5c87b8a1)
(cherry picked from commit 3975a9f3aaf8ed3ceb5788abc325dbe8e89225d3)
(cherry picked from commit dee4a18423151ac7f22221e6fce12d863921c200)
(cherry picked from commit 60aee6370fb15b12fffc6f29582dd4a235f87d94)
- Add a indication to the file history if the file has been renamed,
this indication contains a link to browse the history of the file
further.
- Added unit testing.
- Added integration testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1279
(cherry picked from commit 72c297521b1830360aab4b50e37efcc7e67e0d5d)
(cherry picked from commit 283f9648947f8dd2f315ecca19566ccca2b49c18)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/1550
(cherry picked from commit 7c30af7fdee08efd02041c01abca47394a69bb8b)
(cherry picked from commit f3be6eb269526a9f4ea7861189f07977f2d4a32f)
(cherry picked from commit 78e1755b94c18c043e0c8f8c2849803cc8069feb)
(cherry picked from commit 73799479e0fb68534dac10f809ee246dbc809b62)
(cherry picked from commit 938359b94120b7ea7bcdfbfda265ada691620da1)
(cherry picked from commit b168a9c081f93c10d40319333fc24d68a4f9763c)
[GITEA] Detect file rename and show in history (squash) ctx.Locale
(cherry picked from commit 40447752ff97aa306295685dcf4ddd3b13f48320)
(cherry picked from commit ea23594cdbb12c32dc28638f65bf40e37d344e5f)
(cherry picked from commit cdc473850c85abcbe38c799c2d2446966978f2b2)
(cherry picked from commit 86e6641c29df213d7db1b85867dafebcafeee1dd)
(cherry picked from commit 2757de586b80834513e61033692ac72d25381431)
(cherry picked from commit def4ae32ddb4b0b83f6bb9c197e00fdcd784928e)
(cherry picked from commit 6dada09329e28840f7ad890bed333ae122838fb2)
(cherry picked from commit 5d6d5272513629b126917c30f7bfde421fdcbe27)
Conflicts:
tests/integration/repo_test.go
https://codeberg.org/forgejo/forgejo/pulls/2119
(cherry picked from commit d3c1bce7db31b243a7142b71bf4af36506752e6e)
(cherry picked from commit 04bcb22d5c00d1fa8b39e2a3cf2e73f0a8c1204f)
(cherry picked from commit e16241fd992c22203d113a4a11e7f57f9ed2ddb3)
(cherry picked from commit 8e2beb3ed5da1ac8a58608acdf059f607576ff96)
## Purpose
This is a refactor toward building an abstraction over managing git
repositories.
Afterwards, it does not matter anymore if they are stored on the local
disk or somewhere remote.
## What this PR changes
We used `git.OpenRepository` everywhere previously.
Now, we should split them into two distinct functions:
Firstly, there are temporary repositories which do not change:
```go
git.OpenRepository(ctx, diskPath)
```
Gitea managed repositories having a record in the database in the
`repository` table are moved into the new package `gitrepo`:
```go
gitrepo.OpenRepository(ctx, repo_model.Repo)
```
Why is `repo_model.Repository` the second parameter instead of file
path?
Because then we can easily adapt our repository storage strategy.
The repositories can be stored locally, however, they could just as well
be stored on a remote server.
## Further changes in other PRs
- A Git Command wrapper on package `gitrepo` could be created. i.e.
`NewCommand(ctx, repo_model.Repository, commands...)`. `git.RunOpts{Dir:
repo.RepoPath()}`, the directory should be empty before invoking this
method and it can be filled in the function only. #28940
- Remove the `RepoPath()`/`WikiPath()` functions to reduce the
possibility of mistakes.
---------
Co-authored-by: delvh <dev.lh@web.de>
This should fix https://github.com/go-gitea/gitea/issues/28927
Technically older versions of Git would support this flag as well, but
per https://github.com/go-gitea/gitea/pull/28466 that's the version
where using it (object-format=sha256) left "experimental" state.
`sha1` is (currently) the default, so older clients should be unaffected
in either case.
Signed-off-by: jolheiser <john.olheiser@gmail.com>
When LFS hooks are present in gitea-repositories, operations like git
push for creating a pull request fail. These repositories are not meant
to include LFS files or git push them, that is handled separately. And
so they should not have LFS hooks.
Installing git-lfs on some systems (like Debian Linux) will
automatically set up /etc/gitconfig to create LFS hooks in repositories.
For most git commands in Gitea this is not a problem, either because
they run on a temporary clone or the git command does not create LFS
hooks.
But one case where this happens is git archive for creating repository
archives. To fix that, add a GIT_CONFIG_NOSYSTEM=1 to disable using the
system configuration for that command.
According to a comment, GIT_CONFIG_NOSYSTEM is not used for all git
commands because the system configuration can be intentionally set up
for Gitea to use.
Resolves#19810, #21148
Nowadays, cache will be used on almost everywhere of Gitea and it cannot
be disabled, otherwise some features will become unaviable.
Then I think we can just remove the option for cache enable. That means
cache cannot be disabled.
But of course, we can still use cache configuration to set how should
Gitea use the cache.
The 4 functions are duplicated, especially as interface methods. I think
we just need to keep `MustID` the only one and remove other 3.
```
MustID(b []byte) ObjectID
MustIDFromString(s string) ObjectID
NewID(b []byte) (ObjectID, error)
NewIDFromString(s string) (ObjectID, error)
```
Introduced the new interfrace method `ComputeHash` which will replace
the interface `HasherInterface`. Now we don't need to keep two
interfaces.
Reintroduced `git.NewIDFromString` and `git.MustIDFromString`. The new
function will detect the hash length to decide which objectformat of it.
If it's 40, then it's SHA1. If it's 64, then it's SHA256. This will be
right if the commitID is a full one. So the parameter should be always a
full commit id.
@AdamMajer Please review.
Update golang.org/x/crypto for CVE-2023-48795 and update other packages.
`go-git` is not updated because it needs time to figure out why some
tests fail.
- Remove `ObjectFormatID`
- Remove function `ObjectFormatFromID`.
- Use `Sha1ObjectFormat` directly but not a pointer because it's an
empty struct.
- Store `ObjectFormatName` in `repository` struct
Refactor Hash interfaces and centralize hash function. This will allow
easier introduction of different hash function later on.
This forms the "no-op" part of the SHA256 enablement patch.
The summary string ends up in the database, and (at least) MySQL &
PostgreSQL require valid UTF8 strings.
Fixes#28178
Co-authored-by: Darrin Smart <darrin@filmlight.ltd.uk>
assert.Fail() will continue to execute the code while assert.FailNow()
not. I thought those uses of assert.Fail() should exit immediately.
PS: perhaps it's a good idea to use
[require](https://pkg.go.dev/github.com/stretchr/testify/require)
somewhere because the assert package's default behavior does not exit
when an error occurs, which makes it difficult to find the root error
reason.
This pull request is a minor code cleanup.
From the Go specification (https://go.dev/ref/spec#For_range):
> "1. For a nil slice, the number of iterations is 0."
> "3. If the map is nil, the number of iterations is 0."
`len` returns 0 if the slice or map is nil
(https://pkg.go.dev/builtin#len). Therefore, checking `len(v) > 0`
before a loop is unnecessary.
---
At the time of writing this pull request, there wasn't a lint rule that
catches these issues. The closest I could find is
https://staticcheck.dev/docs/checks/#S103
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Closes#26329
This PR adds the ability to ignore revisions specified in the
`.git-blame-ignore-revs` file in the root of the repository.
The banner is displayed in this case. I intentionally did not add a UI
way to bypass the ignore file (same behaviour as Github) but you can add
`?bypass-blame-ignore=true` to the url manually.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
From the Go specification:
> "1. For a nil slice, the number of iterations is 0."
https://go.dev/ref/spec#For_range
Therefore, an additional nil check for before the loop is unnecessary.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Hi,
We'd like to add merge files files to GetCommitFileStatus fucntions so
API returns the list of all the files associated to a merged pull
request commit, like GitHub API does.
The list of affectedFiles for an API commit is fetched from toCommit()
function in routers/api/v1/repo/commits.go, and API was returning no
file in case of a pull request with no conflict, or just files
associated to the confict resolution, but NOT the full list of merged
files.
This would lead to situations where a CI polling a repo for changes
could miss some file changes due to API returning an empty / partial
list in case of such merged pull requests. (Hope this makes sense :) )
NOTE: I'd like to add a unittest in
integrations/api_repo_git_commits_test.go but failed to understand how
to add my own test bare repo so I can make a test on a merged pull
request commit to check for affectedFiles.
Is there a merged pull request in there that I could use maybe?
Could someone please direct me to the relevant ressources with
informations on how to do that please?
Thanks for your time,
Laurent.
---------
Co-authored-by: Thomas Desveaux <desveaux.thomas@gmail.com>
Close stdout correctly for "git blame", otherwise the failed "git blame"
would case the request hanging forever.
And "os.Stderr" should never (seldom) be used as git command's stderr
Fix#26064
Some git commands should use parent context, otherwise it would exit too
early (by the default timeout, 10m), and the "cmd.Wait" waits till the
pipes are closed.
Fixes#26270.
Co-Author: @wxiaoguang
Thanks @lunny for providing this solution
As
https://github.com/go-gitea/gitea/issues/26270#issuecomment-1661695151
said, at present we cannot get the names of changed files correctly when
the `OldCommitID` is `EmptySHA`. In this PR, the `GetCommitFilesChanged`
method is added and will be used to get the changed files by commit ID.
References:
- https://stackoverflow.com/a/424142
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The `FileBlame` function looks strange, it has `revision` as argument
but doesn't use it.
Since the function never be used, I think we could just remove it.
If anyone thinks it should be kept, please help fix `revision`.
Co-authored-by: Giteabot <teabot@gitea.io>
To record which command is slow, this PR adds a debug log for slow git
operations.
---------
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: delvh <dev.lh@web.de>
