When marking notifications read the results may be returned out of order
or be delayed. This PR sends a sequence number to gitea so that the
browser can ensure that only the results of the latest notification
change are shown.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* add configuration option to restrict users by default
* default IsRestricted permission only set on sign up
setting this in the model messes with other workflows (e.g. syncing LDAP users) where the IsRestricted permission needs to be explicitly set and not overridden by a config value
* fix formatting
* Apply suggestions from code review
* ensure newly created user is set to restricted
* ensure imports are in the correct order
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* fix: primary email cannot be activated
* Primary email should be activated together with user account when
'RegisterEmailConfirm' is enabled.
* To fix the existing error state. When 'RegisterEmailConfirm' is enabled, the
admin should have permission to modify the activations status of user email.
And the user should be allowed to send activation to primary email.
* Only judge whether email is primary from email_address table.
* Improve logging and refactor isEmailActive
Co-authored-by: zeripath <art27@cantab.net>
* Add option to provide signed token to verify key ownership
Currently we will only allow a key to be matched to a user if it matches
an activated email address. This PR provides a different mechanism - if
the user provides a signature for automatically generated token (based
on the timestamp, user creation time, user ID, username and primary
email.
* Ensure verified keys can act for all active emails for the user
* Add code to mark keys as verified
* Slight UI adjustments
* Slight UI adjustments 2
* Simplify signature verification slightly
* fix postgres test
* add api routes
* handle swapped primary-keys
* Verify the no-reply address for verified keys
* Only add email addresses that are activated to keys
* Fix committer shortcut properly
* Restructure gpg_keys.go
* Use common Verification Token code
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add checkbox to delete pull branch after successful merge
* Omit DeleteBranchAfterMerge field in json
* Log a warning instead of error when PR head branch deleted
* Add DefaultDeleteBranchAfterMerge to PullRequestConfig
* Add support for delete_branch_after_merge via API
* Fix for API: the branch should be deleted from the HEAD repo
If head and base repo are the same, reuse the already opened ctx.Repo.GitRepo
* Don't delegate to CleanupBranch, only reuse branch deletion code
CleanupBranch contains too much logic that has already been performed by the Merge
* Reuse gitrepo in MergePullRequest
Co-authored-by: Andrew Thornton <art27@cantab.net>
The current default memory cache implementation is unbounded in size and number of
objects cached. This is hardly ideal.
This PR proposes creating a TwoQueue LRU cache as the underlying cache for Gitea.
The cache is limited by the number of objects stored in the cache (rather than size)
for simplicity. The default number of objects is 50000 - which is perhaps too small
as most of our objects cached are going to be much less than 1kB.
It may be worth considering using a different LRU implementation that actively limits
sizes or avoids GC - however, this is just a beginning implementation.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Support custom mime type mapping for text files
* Apply suggested change to routers/common/repo.go
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
This PR adds a button to delete failed repositories if there has been a
failure during migration and for whatever reason the repository doesn't
get deleted automatically.
Fix#16154
Signed-off-by: Andrew Thornton <art27@cantab.net>
Adds a link to each blame hunk, to view the blame of an earlier version of the file, similar to GitHub. Also refactors the blame render from fmtstring based to template based.
* Fix blame bottom line and add blame prior button
* Jump to previous parent commit from the commit.
* Fix previous commit link
* Fix previous blame link
* Fix the given file not exist in the previous commit.
* Fix blameRow struct not export
* fix theming issues, rename template var
* remove unused LastCommit fetch
* fix location of blame-hunk divider
* rewrite previous commit checks
* remove duplicate commit lookup
its already resolved and stored in ctx.Repo.Commit!
* split out blamePart processing into function
Co-authored-by: rogerluo410 <rogerluo410@gmail.com>
This PR removes multiple unneeded fields from the `HookTask` struct and adds the two headers `X-Hub-Signature` and `X-Hub-Signature-256`.
## ⚠️ BREAKING ⚠️
* The `Secret` field is no longer passed as part of the payload.
* "Breaking" change (or fix?): The webhook history shows the real called url and not the url registered in the webhook (`deliver.go`@129).
Close#16115Fixes#7788Fixes#11755
Co-authored-by: zeripath <art27@cantab.net>
Now that #16069 is merged, some sites may wish to enforce that users are all public, limited or private, and/or disallow users from becoming private.
This PR adds functionality and settings to constrain a user's ability to change their visibility.
Co-authored-by: zeripath <art27@cantab.net>
One of the repeatedly reported issues has been that gitea produces too much console
logging during set up even if the console logger is turned off.
Fundamentally this is due to some otherwise very helpful logging that has to occur
before logging is set up. This has come to a head with the merging of #16243 where
otherwise potentially helpful Trace logging in the git module now appears on the
console.
This PR proposes three things:
1. Change the initial default logger to Info not Trace.
2. Change the logging for the AppPath things to Info in recompense.
3. Add two new command line options to gitea web: --quiet and --verbose
`gitea web -q` or `gitea web --quiet` will only log Fatal level initially.
`gitea web -verbose` will log at Trace.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
You can limit or hide organisations. This pull make it also posible for users
- new strings to translte
- add checkbox to user profile form
- add checkbox to admin user.edit form
- filter explore page user search
- filter api admin and public user searches
- allow admins view "hidden" users
- add app option DEFAULT_USER_VISIBILITY
- rewrite many files to use Visibility field
- check for teams intersection
- fix context output
- right fake 404 if not visible
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Andrew Thornton <art27@cantab.net>
remove log() func from gogs times and switch to proper logging
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
* Allow COMMENT reviews to not specify a body
when using web ui there is no need to specify a body.
so we don't need to specify a body if adding a COMMENT-review
via our api.
* Ensure comments or Body is provided
and add some integration tests for reviewtype COMMENT.
Signed-off-by: Sebastian Sauer <sauer.sebastian@gmail.com>
ReqOrgMembership calls need to be preceded by reqToken
Fix#16192
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* More efficiently parse shas for shaPostProcessor
The shaPostProcessor currently repeatedly calls git rev-parse --verify on both backends
which is fine if there is only one thing that matches a sha - however if there are
multiple things then this becomes wildly inefficient.
This PR provides functions for both backends which are much faster to use.
Fix#16092
* Add ShaExistCache to RenderContext
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* invent ctx.QueryOptionalBool
* [API] ListReleases add draft and pre-release filter
* Add X-Total-Count header
* Add a release to fixtures
* Add TEST for API ListReleases
* Ensure settings for Service and Mailer are read on the install page
NewContext does not set the mailer or service settings so add
a new function that will run this.
Fix#15894
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add migrating message
Signed-off-by: Andrew Thornton <art27@cantab.net>
* simplify messenger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* make messenger an interface
Signed-off-by: Andrew Thornton <art27@cantab.net>
* rename
Signed-off-by: Andrew Thornton <art27@cantab.net>
* prepare for merge
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per tech
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* refactor routers directory
* move func used for web and api to common
* make corsHandler a function to prohibit side efects
* rm unused func
Co-authored-by: 6543 <6543@obermui.de>
* Fix bug when delete branch don't close related PRs
* Merge all deletebranch as one method
* Add missed branch.go
* fix comment
Co-authored-by: Lauris BH <lauris@nix.lv>
* Make modules/context.Context a context.Context
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Simplify context calls
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Set the base context for requests to the HammerContext
Signed-off-by: Andrew Thornton <art27@cantab.net>
* pass context into get-last-commit
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Make commit_info cancellable
Signed-off-by: Andrew Thornton <art27@cantab.net>
* use context as context
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* Restructured code. Moved static checks out of loop.
* Restructured batch api. Add support for individual errors.
* Let router decide if LFS is enabled.
* Renamed methods.
* Return correct status from verify handler.
* Unified media type check in router.
* Changed error code according to spec.
* Moved checks into router.
* Removed invalid v1 api methods.
* Unified methods.
* Display better error messages.
* Added size parameter. Create meta object on upload.
* Use object error on invalid size.
* Skip upload if object exists.
* Moved methods.
* Suppress fields in response.
* Changed error on accept.
* Added tests.
* Use ErrorResponse object.
* Test against message property.
* Add support for the old invalid lfs client.
* Fixed the check because MinIO wraps the error.
* Use individual repositories.
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Added type sniffer.
* Switched content detection from base to typesniffer.
* Added GuessContentType to Blob.
* Moved image info logic to client.
Added support for SVG images in diff.
* Restore old blocked svg behaviour.
* Added missing image formats.
* Execute image diff only when container is visible.
* add margin to spinner
* improve BIN tag on image diffs
* Default to render view.
* Show image diff on incomplete diff.
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
The i_like_gitea cookie appears to be missing the SameSite settings. I think they
were present at some point but may have been removed in a merge.
This PR ensures that they are set.
Fix#15972
Signed-off-by: Andrew Thornton <art27@cantab.net>
This PR simply hides mirror passwords from being displayed on the repo settings page.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Make modules/context.Context a context.Context
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Simplify context calls
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Set the base context for requests to the HammerContext
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Use route to serve assets but not middleware
* Fix build error with bindata tag
* convert path to absolute
* fix build
* reduce function stack
* Add tests for assets
* Remove test for assets because they are not generated
* Use a http function to serve assets
* Still use middleware to serve assets then less middleware stack for assets
* Move serveContent to original position
* remove unnecessary blank line change
* Fix bug for /assets* requests
* clean code
Co-authored-by: zeripath <art27@cantab.net>
* Add links to toggle PR WIP status
* Allow PR author to toggle WIP status
* refactors and restyling, remove links from translations
Co-authored-by: Norwin <noerw@users.noreply.github.com>
Co-authored-by: silverwind <me@silverwind.io>
* add a new internal hook to save ssh log
as title, when a ssh error ocure like #15785.
only when switch ``RUN_MODE`` to dev can we
found which error is ocure. But this way is
not a good idea for production envirment.
this changes try save ssh error mesage to the
log file like other log by a new internal hook.
I think it's usefull for find error message
in production envirment. Thanks.
Signed-off-by: a1012112796 <1012112796@qq.com>
* rename and fix nit
* Update modules/private/hook.go
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
There was a small regression in #15303 whereby token auth
with 2FA active would be disallowed.
This PR fixes this.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* Prevent double-login for Git HTTP and LFS and simplify login
There are a number of inconsistencies with our current methods for
logging in for git and lfs. The first is that there is a double login
process. This is particularly evident in 1.13 where there are no less
than 4 hash checks for basic authentication due to the previous
IsPasswordSet behaviour.
This duplicated code had individual inconsistencies that were not
helpful and caused confusion.
This PR does the following:
* Remove the specific login code from the git and lfs handlers except
for the lfs special bearer token
* Simplify the meaning of DisableBasicAuthentication to allow Token and
Oauth2 sign-in.
* The removal of the specific code from git and lfs means that these
both now have the same login semantics and can - if not
DisableBasicAuthentication - login from external services. Further it
allows Oauth2 token authentication as per our standard mechanisms.
* The change in the recovery handler prevents the service from
re-attempting to login - primarily because this could easily cause a
further panic and it is wasteful.
* add test
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
* Restore PAM user autocreation functionality
PAM autoregistration of users currently fails due to email invalidity.
This PR adds a new setting to PAM to allow an email domain to be set
or just sets the email to the noreply address and if that fails falls
back to uuid@localhost
Fix#15702
Signed-off-by: Andrew Thornton <art27@cantab.net>
* As per KN4CKER
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Move restore repo to internal router and invoke from command to avoid open the same db file or queues files
* Follow @zeripath's review
* set no timeout for resotre repo private request
* make restore repo cancelable
* Use single shared random string generation function
- Replace 3 functions that do the same with 1 shared one
- Use crypto/rand over math/rand for a stronger RNG
- Output only alphanumerical for URL compatibilty
Fixes: #15536
* use const string method
* Update modules/avatar/avatar.go
Co-authored-by: a1012112796 <1012112796@qq.com>
Co-authored-by: a1012112796 <1012112796@qq.com>
* Add selecting tags on the compare page
* Remove unused condition and change indentation
* Fix tag tab in dropdown to be black
* Add compare tag integration test
Co-authored-by: Jonathan Tran <jon@allspice.io>
* Implemented userinfo #8534
* Make lint happy
* Add userinfo endpoint to openid-configuration
* Give an error when uid equals 0
* Implemented BearerTokenErrorCode handling
* instead of ctx.error use ctx.json so that clients
parse error and error_description correctly
* Removed unneeded if statement
* Use switch instead of subsequent if statements
Have a default for unknown errorcodes.
Co-authored-by: Nils Hillmann <hillmann@nlh-software.de>
Co-authored-by: nlhsoftware <nlhsoftware@noreply.localhost>
* fix some ui bug about draft release
- should not show draft release in tag list because
it will't create real tag
- still show draft release without tag and commit message
for draft release instead of 404 error
- remove tag load for attachement links because it's useless
Signed-off-by: a1012112796 <1012112796@qq.com>
* add test code
* fix test
That's because has added a new release in relaese test database.
* fix dropdown link for draft release
Since the move to Chi the number of stack frames has proliferated somewhat catastrophically and we're up to 96 frames with multiple tests of the url outside of a trie which is inefficient.
This PR reduces the number of stack frames by 6 through careful use of Route, moves Captcha into its own router so that it only fires on Captcha routes, similarly for avatars and repo-avatars.
The robots.txt, / and apple-touch-icon.png are moved out of requiring Contexter.
It moves access logger higher in the stack frame because there is no reason why it can't be higher.
Extract from #15186
Contains #15292
* Add compare tag dropdown to releases page
* Change defaults to be more intuitive and remove unneeded option
* Fix to select branch on releases page
Co-authored-by: Jonathan Tran <jon@allspice.io>
Co-authored-by: Kyle D <kdumontnu@gmail.com>
in previous the grenrated link is
``testg/testrepo/src/commit/....``
which is not right.
the right version is ``/testg/testrepo/.......``
(start wiht ``/``)
or ``http://127.0.0.1:3000/xxxxx`` (full link)
to make it hase same result with explore page
I choose the secound style.
fix#15438
Signed-off-by: a1012112796 <1012112796@qq.com>
Co-authored-by: 6543 <6543@obermui.de>
* Refactored handleOAuth2SignIn in routers/user/auth.go
The function handleOAuth2SignIn was called twice but some code path could only
be reached by one of the invocations. Moved the unnecessary code path out of
handleOAuth2SignIn.
* Refactored user creation
There was common code to create a user and display the correct error message.
And after the creation the only user should be an admin and if enabled a
confirmation email should be sent. This common code is now abstracted into
two functions and a helper function to call both.
* Added auto-register for OAuth2 users
If enabled new OAuth2 users will be registered with their OAuth2 details.
The UserID, Name and Email fields from the gothUser are used.
Therefore the OpenID Connect provider needs additional scopes to return
the coresponding claims.
* Added error for missing fields in OAuth2 response
* Linking and auto linking on oauth2 registration
* Set default username source to nickname
* Add automatic oauth2 scopes for github and google
* Add hint to change the openid connect scopes if fields are missing
* Extend info about auto linking security risk
Co-authored-by: Viktor Kuzmin <kvaster@gmail.com>
Signed-off-by: Martin Michaelis <code@mgjm.de>
#13649 assumed that direct avatar urls would always be libravatar urls - this leads
to NPEs if federated avatar service is disabled.
Fix#15421
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Simplify the web.go FCGI path by moving the req.URL.Path fix-up to listener
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* _ to unused func options
* rm useless brakets
* rm trifial non used models functions
* rm dead code
* rm dead global vars
* fix routers/api/v1/repo/issue.go
* dont overload import module
* Implemented LFS client.
* Implemented scanning for pointer files.
* Implemented downloading of lfs files.
* Moved model-dependent code into services.
* Removed models dependency. Added TryReadPointerFromBuffer.
* Migrated code from service to module.
* Centralised storage creation.
* Removed dependency from models.
* Moved ContentStore into modules.
* Share structs between server and client.
* Moved method to services.
* Implemented lfs download on clone.
* Implemented LFS sync on clone and mirror update.
* Added form fields.
* Updated templates.
* Fixed condition.
* Use alternate endpoint.
* Added missing methods.
* Fixed typo and make linter happy.
* Detached pointer parser from gogit dependency.
* Fixed TestGetLFSRange test.
* Added context to support cancellation.
* Use ReadFull to probably read more data.
* Removed duplicated code from models.
* Moved scan implementation into pointer_scanner_nogogit.
* Changed method name.
* Added comments.
* Added more/specific log/error messages.
* Embedded lfs.Pointer into models.LFSMetaObject.
* Moved code from models to module.
* Moved code from models to module.
* Moved code from models to module.
* Reduced pointer usage.
* Embedded type.
* Use promoted fields.
* Fixed unexpected eof.
* Added unit tests.
* Implemented migration of local file paths.
* Show an error on invalid LFS endpoints.
* Hide settings if not used.
* Added LFS info to mirror struct.
* Fixed comment.
* Check LFS endpoint.
* Manage LFS settings from mirror page.
* Fixed selector.
* Adjusted selector.
* Added more tests.
* Added local filesystem migration test.
* Fixed typo.
* Reset settings.
* Added special windows path handling.
* Added unit test for HTTPClient.
* Added unit test for BasicTransferAdapter.
* Moved into util package.
* Test if LFS endpoint is allowed.
* Added support for git://
* Just use a static placeholder as the displayed url may be invalid.
* Reverted to original code.
* Added "Advanced Settings".
* Updated wording.
* Added discovery info link.
* Implemented suggestion.
* Fixed missing format parameter.
* Added Pointer.IsValid().
* Always remove model on error.
* Added suggestions.
* Use channel instead of array.
* Update routers/repo/migrate.go
* fmt
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: zeripath <art27@cantab.net>
Forms are dependent on models and therefore should be in services.
This PR also removes the old auth. aliasing
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
A previous commit that sent unauthorized if the user is unauthorized
simply leads to the repeated reopening of the eventsource. #
This PR changes the event returned to tell the client to close the
eventsource and thus prevents the repeated reopening.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Unexport SendUserMail
* Instead of "[]*models.User" or "[]string" lists infent "[]*MailRecipient" for mailer
* adopt
* code format
* TODOs for "i18n"
* clean
* no fallback for lang -> just use english
* lint
* exec testComposeIssueCommentMessage per lang and use only emails
* rm MailRecipient
* Dont reload from users from db if you alredy have in ram
* nits
* minimize diff
Signed-off-by: 6543 <6543@obermui.de>
* localize subjects
* linter ...
* Tr extend
* start tmpl edit ...
* Apply suggestions from code review
* use translation.Locale
* improve mailIssueCommentBatch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add i18n to datas
Signed-off-by: Andrew Thornton <art27@cantab.net>
* a comment
Co-authored-by: Andrew Thornton <art27@cantab.net>
* response 404 for diff/patch of a commit that not exist
fix#15217
Signed-off-by: a1012112796 <1012112796@qq.com>
* Update routers/repo/commit.go
Co-authored-by: silverwind <me@silverwind.io>
* use ctx.NotFound()
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: silverwind <me@silverwind.io>
Implements request #14320 The rendering of CSV files does match the diff style.
* Moved CSV logic into base package.
* Added method to create a tabular diff.
* Added CSV compare context.
* Added CSV diff template.
* Use new table style in CSV markup.
* Added file size limit for CSV rendering.
* Display CSV parser errors in diff.
* Lazy read single file.
* Lazy read rows for full diff.
* Added unit tests for various CSV changes.
/api/v1/repos/issues/search is a highly inefficient search which is unfortunately
the basis for our dependency searching algorithm. In particular it currently loads
all of the repositories and their owners and their primary coding language all of
which is immediately thrown away.
This PR makes one simple change - just get the IDs.
Related #14560
Related #12827
Signed-off-by: Andrew Thornton <art27@cantab.net>
in previouse if a log subsetcion not set level
it will use ``info`` as default value.
this pr will make default value (``[log] -> LEVEL``) useable.
example config:
```INI
[log]
MODE = console
LEVEL = Trace
[log.console]
LEVEL =
STDERR = false
```
previous result:
```JSON
// console:
{
"level": "info",
...................
}
```
after change:
```JSON
// console:
{
"level": "track",
...................
}
```
Signed-off-by: a1012112796 <1012112796@qq.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Add reverse proxy configuration support for remote IP address validation
* Trust all IP addresses in containerized environments by default
* Use single option to specify networks and proxy IP addresses. By default trust all loopback IPs
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Ensure validation occurs on clone addresses too
Fix#14984
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix test
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix api tests
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* API: fix set milestone on PR creation
pr creation via API failed with 404, because we searched
for milestoneID 0, due to uninitialized var usage D:
* add tests
* fix expected status codes
* fix tests
Co-authored-by: 6543 <6543@obermui.de>
* Prevent incorrect HTML escaping in swagger.json
Fix#14706
Signed-off-by: Andrew Thornton <art27@cantab.net>
* oops add it to the helper
Signed-off-by: Andrew Thornton <art27@cantab.net>
* try again
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* fix no items under /org/$org/{issues,pulls}?type=mentioned
it was filtering by org id, but org-mentions are not persisted like that
to the DB, we need to filter by UID.
This means, selecting different teams will only have an effect on the
selected repos, otherwise results will be the same, which may be
suboptimal.
fixes#14941
* don't spam a warning for a perfectly fine request
When editing forked repos using the API the BaseRepository needs to loaded
in order to check its visibility otherwise there will be NPE panic.
Fix#14956
Signed-off-by: Andrew Thornton <art27@cantab.net>
This is an alternative PR to #13687.
Add `[ui.explore]` settings to allow restricting the
explore pages to logged in users only and to disable the users explore page.
The two proposed settings are:
- `REQUIRE_SIGNIN_VIEW`: Only allows access to the explore pages if the
user is signed in. Also restricts
- `/api/v1/user/search`
- `/api/v1/users/{username}`
- `/api/v1/users/{username}/repos`
- but does not restrict `/api/v1/users/{username}/heatmap`
- `DISABLE_USERS_PAGE`: Disables the /explore/users page
Fix#2908Close#13687
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Add SameSite setting for cookies and rationalise the cookie setting code. Switches SameSite to Lax by default.
There is a possible future extension of differentiating which cookies could be set at Strict by default but that is for a future PR.
Fix#5583
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Make auto check manual merge as a chooseable mod and add manual merge way on ui
as title, Before this pr, we use same way with GH to check manually merge.
It good, but in some special cases, misjudgments can occur. and it's hard
to fix this bug. So I add option to allow repo manager block "auto check manual merge"
function, Then it will have same style like gitlab(allow empty pr). and to compensate for
not being able to detect THE PR merge automatically, I added a manual approach.
Signed-off-by: a1012112796 <1012112796@qq.com>
* make swager
* api support
* ping ci
* fix TestPullCreate_EmptyChangesWithCommits
* Apply suggestions from code review
Co-authored-by: zeripath <art27@cantab.net>
* Apply review suggestions and add test
* Apply suggestions from code review
Co-authored-by: zeripath <art27@cantab.net>
* fix build
* test error message
* make fmt
* Fix indentation issues identified by @silverwind
Co-authored-by: silverwind <me@silverwind.io>
* Fix tests and make manually merged disabled error on API the same
Signed-off-by: Andrew Thornton <art27@cantab.net>
* a small nit
* fix wrong commit id error
* fix bug
* simple test
* fix test
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Organization removal confirmation using name not password
Gitea is asking for user password to confirm organization
removal so this operation cannot be done in systems with
SSO authentication (where no user passwords are used).
This mod changes the way gitea confirms organization
removal - user must enter organization name (not user
password) to confirm operation (similar to repository
removal confirmation).
Author-Change-Id: IB#1107219
* Translation removed
Translation removed from PR - will be restored using Crowdin
after pull got merged.
Fixes: 95ddcdd8bd8097a952894556d42641d5ec269288
Related: https://github.com/go-gitea/gitea/pull/14738
Author-Change-Id: IB#1107219
* make repo as "pending transfer" if on transfer start doer has no right to create repo in new destination
* if new pending transfer ocured, create UI & Mail notifications
When using HCaptcha on link account pages the site key needs to be passed
in. This PR ensures that HCaptchaSiteKey is set in the data.
Fix#14766
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Support create single tag directly
support create tag with message from create release ui
Signed-off-by: a1012112796 <1012112796@qq.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: zeripath <art27@cantab.net>
Move the stopwatches to the eventsource stream
Use the /user/events eventsource to update the stopwatches
instead of polling /api/v1/user/stopwatches if the eventsource
is enabled.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Expose Restricted field for User
* Add Option to Change Restricted on User via adminEditUser API
* Add test who change restricted & test if it changed it ...
* make generate-swagger
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Somehow the test for detecting if branches are equal broke
this PR restores this functionality.
Fix#14502
Signed-off-by: Andrew Thornton <art27@cantab.net>
Gitea allows to whitelist email domains so that only email addresses from certain domains are allowed to register an account, but does not currently allows to do the opposite: blacklisting email domains so that addresses from certain domains are *forbidden* to register an account.
The idea has been briefly mentioned in the discussion about issue #6350, but never implemented. This PR does that.
The rationale is that, in my experience of running a Gitea instance, *a single email domain* is responsible for *most* of the spam accounts, and for *all* of the spam accounts that manage to get past the email confirmation step. So on top of the other spam mitigation measures already available (email confirmation, CAPTCHA, etc.), having the option to block a particularly annoying domain would be helpful.
close#13628
* Fix a runtime error when modifying a repository through API call
Using the `PATCH /repos/{owner}/{repo}` endpoint and attempting to
modify `default_branch` on an empty repository will cause a
panic. This commit adds a check for a nil pointer before attempting
to dereference it.
* Apply suggestions from code review
* Apply suggestions from code review
* Ensure that the git repository is loaded
If you change the default branch for a repository you must change it in
git too. Therefore you must open the repository before changing the
default branch.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Allow empty repos to have their default branches changed
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Anton Khimich <anton.khimicha@mail.utoronto.ca>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Andrew Thornton <art27@cantab.net>
* Added option to disable web hooks
This mod introduces DISABLE_WEB_HOOKS parameter in [security] section
of app.ini (by default set to false). If set to true it disables web
hooks feature. Any existing undelivered web hook tasks will be cancelled.
Any existing web hook definitions will be left untouched in db but
its delivery tasks will be ignored.
Author-Change-Id: IB#1105130
* Webhook spelling fixed
Webhook spelling fixed.
Fixes: 07df6614dc84cdd2e9f39c57577fa1062bd70012
Related: https://github.com/go-gitea/gitea/pull/13176#pullrequestreview-510868421
Author-Change-Id: IB#1105174
* Parameter description fixed
Parameter description fixed.
Fixes: 07df6614dc84cdd2e9f39c57577fa1062bd70012
Related: https://github.com/go-gitea/gitea/pull/13176#pullrequestreview-514086107
Author-Change-Id: IB#1105174
* Prevent adding nil label to .AddedLabels or .RemovedLabels
There are possibly a few old databases out there with malmigrated data that can
cause panics with empty labels being migrated.
This PR adds a few tests to prevent nil labels being added.
Fix#14466
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add doctor command to remove the broken label comments
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Memcached TTL cannot be > 30 days and if it is attempted the TTL is interpreted as
a unix timestamp.
This PR ensures that the TTL is switched to a unix timestamp in those cases.
Fix#14571
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add Content-Length header to HEAD requests
This change adds the header Content-Length to HEAD HTTP requests.
The previous behaviour was blocking some Windows executables (i.e
bitsadmin.exe) from downloading files hosted in Gitea.
This along with PR #14541, makes the web server compliant with HTTP RFC 2616 which states
"The methods GET and HEAD MUST be supported by all general-purpose servers"
and
"The HEAD method is identical to GET except that the server MUST NOT return a message-body in the response."
This should also respond to issues #8030 and #14532.
* This change adds the header Content-Length to HEAD HTTP requests
Pass the Size of the content as a parameter to ServeData() instead of
calculating it using ioutil.ReadAll(reader) --> this call is dangerous
and can result in a denial of service.
* Add Content-Length header to HEAD requests
Quick fix for imported dependency not used.
* Check if size is positiv int ...
Co-authored-by: zeripath <art27@cantab.net>
REGISTER_MANUAL_CONFIRM is not honored when doing performing an openid registration. The new account is directly accessible.
With this patch, the manual confirm flag gets honored in the same way as a "normal" registration.
Before moving to Chi, HEAD requests were automatically answered by GET
handlers (SetAutoHead(true) from macaron was used).
This Change will restore the previous behaviour.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Fix#14121, #14478.
The `AccessLog` middleware has to be after `Contexter` or `APIContexter` so that we can get `LoginUserName` if possible.
And also there is a **BREAK** change that it removed internal API access log.
Use [chi](https://github.com/go-chi/chi) instead of the forked [macaron](https://gitea.com/macaron/macaron). Since macaron and chi have conflicts with session share, this big PR becomes a have-to thing. According my previous idea, we can replace macaron step by step but I'm wrong. :( Below is a list of big changes on this PR.
- [x] Define `context.ResponseWriter` interface with an implementation `context.Response`.
- [x] Use chi instead of macaron, and also a customize `Route` to wrap chi so that the router usage is similar as before.
- [x] Create different routers for `web`, `api`, `internal` and `install` so that the codes will be more clear and no magic .
- [x] Use https://github.com/unrolled/render instead of macaron's internal render
- [x] Use https://github.com/NYTimes/gziphandler instead of https://gitea.com/macaron/gzip
- [x] Use https://gitea.com/go-chi/session which is a modified version of https://gitea.com/macaron/session and removed `nodb` support since it will not be maintained. **BREAK**
- [x] Use https://gitea.com/go-chi/captcha which is a modified version of https://gitea.com/macaron/captcha
- [x] Use https://gitea.com/go-chi/cache which is a modified version of https://gitea.com/macaron/cache
- [x] Use https://gitea.com/go-chi/binding which is a modified version of https://gitea.com/macaron/binding
- [x] Use https://github.com/go-chi/cors instead of https://gitea.com/macaron/cors
- [x] Dropped https://gitea.com/macaron/i18n and make a new one in `code.gitea.io/gitea/modules/translation`
- [x] Move validation form structs from `code.gitea.io/gitea/modules/auth` to `code.gitea.io/gitea/modules/forms` to avoid dependency cycle.
- [x] Removed macaron log service because it's not need any more. **BREAK**
- [x] All form structs have to be get by `web.GetForm(ctx)` in the route function but not as a function parameter on routes definition.
- [x] Move Git HTTP protocol implementation to use routers directly.
- [x] Fix the problem that chi routes don't support trailing slash but macaron did.
- [x] `/api/v1/swagger` now will be redirect to `/api/swagger` but not render directly so that `APIContext` will not create a html render.
Notices:
- Chi router don't support request with trailing slash
- Integration test `TestUserHeatmap` maybe mysql version related. It's failed on my macOS(mysql 5.7.29 installed via brew) but succeed on CI.
Co-authored-by: 6543 <6543@obermui.de>
* Add redirect for user
* Add redirect for orgs
* Add user redirect test
* Appease linter
* Add comment to DeleteUserRedirect function
* Fix locale changes
* Fix GetUserByParams
* Fix orgAssignment
* Remove debug logging
* Add redirect prompt
* Dont Export DeleteUserRedirect & only use it within a session
* Unexport newUserRedirect
* cleanup
* Fix & Dedub API code
* Format Template
* Add Migration & rm dublicat
* Refactor: unexport newRepoRedirect() & rm dedub del exec
* if this fails we'll need to re-rename the user directory
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* refactor models.DeleteComment and delete related reactions too
* use deleteComment for UserDeleteWithCommentsMaxDays in DeleteUser
* nits
* Use time.Duration as other time settings have
* docs
* Resolve Fixme & fix potential deadlock
* Disabled by Default
* Update Config Value Description
* switch args
* Update models/issue_comment.go
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: zeripath <art27@cantab.net>
* Added TrN for repository limit
* Removed form.reach_limit_of_creation_0
* disable Create Button if user can not create
Co-authored-by: 6543 <6543@obermui.de>
* add notification about running stopwatch to header
* serialize seconds, duration in stopwatches api
* ajax update stopwatch
i should get my testenv working locally...
* new variant: hover dialog
* noscript compatibility
* js: live-update stopwatch time
* js live update robustness
* Add pager to the branches page
* override pageSize if bigger than max
* Make branches commit range configurable
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: silverwind <me@silverwind.io>
The incorrect use of filepath instead of path means that
it is possible to cause a stackoverflow on Windows
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Implement ghost comment mitigation
Adds a config option USER_DELETE_WITH_COMMENTS_MAX_DAYS to the [service] section. See https://codeberg.org/Codeberg/Discussion/issues/24 for the underlying issue.
* cleanup
* use setting module correctly
* add to docs
Co-authored-by: Moritz Marquardt <git@momar.de>
* Add review requested filter on pull request overview #13682
fix formatting
* add review_requested filter to /repos/issues/search API endpoint
* only Approve and Reject status should supersede Request status
* add support for team reviews
* refactor: remove duplication of issue filtering conditions
* Change to display SVG files as images
* Remove unsafe styles from SVG CSP
* Add integration test to test SVG headers
* Add config setting to disable SVG rendering
* Add test for img tag when loading SVG image
* Remove the Raw view button for svg files since we don't fully support this
* Fix copyright year
* Rename and move config setting
* Add setting to cheat sheet in docs
* Fix so that comment matches cheat sheet
* Add allowing styles in CSP based on pull request feedback
* Re-enable raw button since we show SVG styles now
* Change so that SVG files are editable
* Add UI to toggle between source and rendered image for SVGs
* Change to show blame button for SVG images
* Fix to update ctx data
* Add test for DetectContentType when file is longer than sniffLen
Co-authored-by: Jonathan Tran <jon@allspice.io>
Co-authored-by: Kyle D <kdumontnu@gmail.com>
* move SaltGeneration into HashPasswort and rename it to what it does
* Migration: Where Password is Valid with Empty String delete it
* prohibit empty password hash
* let SetPassword("") unset pwd stuff
Fixed#8861
* use ajax on PR review page
* handle review comments
* extract duplicate code
FetchCodeCommentsByLine was initially more or less copied from fetchCodeCommentsByReview. Now they both use a common findCodeComments function instead
* use the Engine that was passed into the method
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Check permission for the appropriate unit type
Fixes false positives for "User created Issues in Repository which they no longer have access to" errors
* change log level to Debug
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* fix build
* take flash error message back and fix more windows lint error
* performance optimization
* own step to check lint for windows
Co-authored-by: 6543 <6543@obermui.de>
* Added MirrorInterval to the API
* Remove MirrorInterval from CreateRepository
* Removed Duplicate UpdateMirror Function
* Updated Error Logging
* Update Log Message for is not Mirror
Co-authored-by: 6543 <6543@obermui.de>
* Delete Debug Statement that snuck in
Co-authored-by: zeripath <art27@cantab.net>
* Add Check for If Interval is too small
* Output to API Call
* Add Error Object when time is Less than Min Interval
* Frequency Error Message
Co-authored-by: zeripath <art27@cantab.net>
* Allow Zero Mirror Interval
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: zeripath <art27@cantab.net>
This is "minimal" in the sense that only the Authorization Code Flow
from OpenID Connect Core is implemented. No discovery, no configuration
endpoint, and no user scope management.
OpenID Connect is an extension to the (already implemented) OAuth 2.0
protocol, and essentially an `id_token` JWT is added to the access token
endpoint response when using the Authorization Code Flow. I also added
support for the "nonce" field since it is required to be used in the
id_token if the client decides to include it in its initial request.
In order to enable this extension an OAuth 2.0 scope containing
"openid" is needed. Other OAuth 2.0 requests should not be impacted by
this change.
This minimal implementation is enough to enable single sign-on (SSO)
for other sites, e.g. by using something like `mod_auth_openidc` to
only allow access to a CI server if a user has logged into Gitea.
Fixes: #1310
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
* Disable SSH key addition and deletion when externally managed
When a user has a login source which has SSH key management
key addition and deletion using the UI should be disabled.
Fix#13983
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Make only externally managed keys disabled
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* remove github.com/unknwon/com from models
* dont use "com.ToStr()"
* replace "com.ToStr" with "fmt.Sprint" where its easy to do
* more refactor
* fix test
* just "proxy" Copy func for now
* as per @lunny
* Inline manifest.json
Improve performance by eliminating this separate request and just inline
this small JSON in HTML directly as a data uri.
Also update previously static app name scripts to use AppName.
I've confirmed this as working via "Add to Homescreen" feature which
offered to save the shortcut under the new app name.
* prerender manifest data on startup
* move to settings
* restore setting.AppStartTime and use it on admin page
* use double quotes because template.URL escapes everything
* fix lint
* move variable to global context variable
* delete template file
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
* add user filter to issueTrackedTimes
fixes#14024
* update swagger
* allow user filter for issue writers
* improve swagger doc
* return 404 on invalid user
* now uses the same permission model as for the activity feed:
only include activities in repos, that the doer has access to.
this might be somewhat slower.
* also improves handling of user.KeepActivityPrivate (still shows
the heatmap to self & admins)
* extend tests
* adjust integration test to new behaviour
* add access to actions for admins
* extend heatmap unit tests
Originally, it was filled by the commit messages of the involved
commits. In this change, we use the headline comment of the pull
request as the commit message when it is a squash merge.
Thanks to @zeripath for suggesting the idea.
Fixes#12365
Co-authored-by: Mura Li <typeless@users.noreply.github.com>
* Added option to disable migrations
This patch introduces DISABLE_MIGRATIONS parameter in [repository]
section of app.ini (by default set to false). If set to true
it blocks access to repository migration feature.
This mod hides also local repo import option in user editor if
local repo importing or migrations is disabled.
* Alter Example config
DISABLE_MIGRATIONS set to false in example config to
match its default value.
* HTTP error 403 instead of 500 on denied access to migration
* Parameter DISABLE_MIGRATIONS exposed via API
Fixes: 04b04cf854bcb3ed7659442bcf79822bdebe29e9
Author-Change-Id: IB#1105130
* Show dropdown with all statuses for commit
* Use popups
* Remove unnecessary change
* Style popup
* Use divided list
* As per @silverwind
* Refactor GetLastCommitStatus
* Missing dropdown on repo home and commit page
* Fix tests
* Make status icon be a part of a link on PR list
* Fix missing translation call
* Indent fix
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Add register manual confirm settings option
The new settings option is used when manually approving new
registrations.
* Enable manual confirmation of new registered user
When manual registration confirmation is desired (by default `false`)
create new user in the database that is *not active*. The user must then
be activated manually.
This change speeds up the process of adding new confirmed users for
Gitea instances without external auth mechanism. (Currently the option
is to manually create new user by admin.)
* Update docs/content/doc/advanced/config-cheat-sheet.zh-cn.md
Co-authored-by: a1012112796 <1012112796@qq.com>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: a1012112796 <1012112796@qq.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Show status check for merged PRs
* Handle PRs with no commits
* Styling
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: 6543 <6543@obermui.de>
* Move last commit cache back into modules/git
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove go-git from the interface for last commit cache
Signed-off-by: Andrew Thornton <art27@cantab.net>
* move cacheref to last_commit_cache
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove go-git from routers/private/hook
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Move FindLFSFiles to pipeline
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Make no-go-git variants
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Submodule RefID
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix issue with GetCommitsInfo
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix GetLastCommitForPaths
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Improve efficiency
Signed-off-by: Andrew Thornton <art27@cantab.net>
* More efficiency
Signed-off-by: Andrew Thornton <art27@cantab.net>
* even faster
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Reduce duplication
* As per @lunny
Signed-off-by: Andrew Thornton <art27@cantab.net>
* attempt to fix drone
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix test-tags
Signed-off-by: Andrew Thornton <art27@cantab.net>
* default to use no-go-git variants and add gogit build tag
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @6543
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* add thumbnail preview section to attachments
* dont show thumbnail if the image is already shown inline
* update router to pass the `content` to the attachemnts template
* limit attachment preview height to 150px (same as width)
* remove unused css (referance removed in https://github.com/go-gitea/gitea/pull/11141/files#diff-9faae32445ed9673de2830c9fc35e93f44487f0a0068202988adaf00a5bac850L66 )
* dont show divider after edit if no attachemnts
Co-authored-by: James <inbox.dev@jhodges.co.uk>
Co-authored-by: 6543 <6543@obermui.de>
`user.HashPassword` may potentially - and in fact now likely does - change
the `passwd_hash_algo` therefore whenever the `passwd` is updated, this
also needs to be updated.
Fix#13832
Thanks @fblaese for the hint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Log IP on SSH authentication failure
fixes https://github.com/go-gitea/gitea/issues/13094
* include string 'Failed authentication attempt' in error
* update fail2ban docs
also match failed authentication over command line
* better logging of authentication errors with IP addresses
* format ...
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: 6543 <6543@obermui.de>
* Direct avatar rendering
This adds new template helpers for avatar rendering which output image
elements with direct links to avatars which makes them cacheable by the
browsers.
This should be a major performance improvment for pages with many avatars.
* fix avatars of other user's profile pages
* fix top border on user avatar name
* uncircle avatars
* remove old incomplete avatar selector
* use title attribute for name and add it back on blame
* minor refactor
* tweak comments
* fix url path join and adjust test to new result
* dedupe functions
* add black list and white list support for migrating repositories
* fix fmt
* fix lint
* fix vendor
* fix modules.txt
* clean diff
* specify log message
* use blocklist/allowlist
* allways use lowercase to match url
* Apply allow/block
* Settings: use existing "migrations" section
* convert domains lower case
* dont store unused value
* Block private addresses for migration by default
* fix lint
* use proposed-upstream func to detect private IP addr
* a nit
* add own error for blocked migration, add tests, imprufe api
* fix test
* fix-if-localhost-is-ipv4
* rename error & error message
* rename setting options
* Apply suggestions from code review
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
When running gitea for the first time, the stylesheets for the
installation page are broken since the middleware that statically serves
stylesheets does not get executed by chi. This is because if no handlers
are registered in chi, it will drop all middleware.
This commit introduces a "dummy" handler to deal with that quirk.
Closes#13725
Thanks: Lunny Xiao <xiaolunwen@gmail.com> for finding the quirk
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* ui: show 'owner' tag for real owner
Signed-off-by: a1012112796 <1012112796@qq.com>
* Update custom/conf/app.example.ini
* simplify logic
fix logic
fix a small bug about original author
* remove system manager tag
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Add time filter for issue search
* Add limit option for paggination
* Add Filter for: Created by User, Assigned to User, Mentioning User
* update swagger
* Add Tests for limit, before & since
* Fixes#13641 - Filtering in Pull Request kept all the time.
- The URL contains all the time the assignee in cases
where once a type has been selected.
Signed-off-by: Karl Heinz Marbaise <kama@soebes.de>
* Followup Fixes#13641 - Filtering in Pull Request kept all the time.
- The URL contains all the time the assignee in cases
where once a type has been selected.
- The same behaviour was observed issues viewed via milestones.
Signed-off-by: Karl Heinz Marbaise <kama@soebes.de>
* Remove fetch request from heatmap
Render heatmap data directly to HTML, eliminating one HTTP request on
frontpage and user profile. Also added min-height to the container so
the page content will no longer move after loading.
* rename and error display
* also log the js error
* add error handler
* remove useless inline style and hide divider on small screens
* Update routers/user/home.go
* Update routers/user/profile.go
This enabled HTTP time-based cache for storage assets, primarily
avatars. I have not observed If-Modified-Since from browsers during
tests but I guess it's good to support regardless.
It introduces a new generic httpcache module that can handle both
time-based and etag-based caching.
Additionally, manifest.json and robots.txt are now also cachable.
* Fix label display on new issues
PR #13570 broke label rendering for new issues and pulls because
missed the fact that the code was relying on the DOM elements being
toggled by JavaScript.
On top of that, the label rendering for new issues and pull was using
an outdated template which I consolidated in a new shared template.
* remove wrapper element and style tweaks
* style tweaks
* use shared template for whole label list
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Use mount but not register for chi routes
* Fix test
* Fix test
* Fix test
* Fix comment
* turn back unnecessary change
* Remove the timout middleware since some operations may spend much time.
* Improve error feedback for duplicate deploy keys
Instead of a generic HTTP 500 error page, a flash message is rendered
with the deploy key page template so inform the user that a key with the
intended title already exists.
* API returns 422 error when key with name exists
* Add email validity checking
Add email validity checking for the following routes:
[Web interface]
1. User registration
2. User creation by admin
3. Adding an email through user settings
[API]
1. POST /admin/users
2. PATCH /admin/users/:username
3. POST /user/emails
* Add further tests
* Add signup email tests
* Add email validity check for linking existing account
* Address PR comments
* Remove unneeded DB session
* Move email check to updateUser
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Let Branch and Raw Endpoint return json error if not found
* Revert "RM RepoRefByTypeForAPI and move needed parts into GetRawFile directly"
This reverts commit d826d08577b23765cb3c257e7a861191d1aa9a04.
* more similar to RepoRefByType
* dedub-code
* API should just speak JSON
* nice name
Co-authored-by: zeripath <art27@cantab.net>
Migrate git hook editor to monaco, replacing CodeMirror. Had to do a few
refactors to make the monaco instantiation generic enough to be of use.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* prevent git operations for inactive users
* Some fixes
* Deny push to the repositories which's owner is inactive
* deny operations also when user is ProhibitLogin
Co-authored-by: zeripath <art27@cantab.net>
* Multiple GitGraph improvements.
Add backend support for excluding PRs, selecting branches and files.
Fix#10327
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @silverwind
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @silverwind
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Only show refs in dropdown we display on the graph
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @silverwind
Signed-off-by: Andrew Thornton <art27@cantab.net>
* use flexbox for ui header
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Move Hide Pull Request button to the dropdown
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add SHA and user pictures
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix test
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix test 2
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fixes
* async
* more tweaks
* use tabs in tmpl
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove commented thing
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix linting
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update web_src/js/features/gitgraph.js
Co-authored-by: silverwind <me@silverwind.io>
* graph tweaks
* more tweaks
* add title
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix loading indicator z-index and position
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Make archival asynchronous
The prime benefit being sought here is for large archives to not
clog up the rendering process and cause unsightly proxy timeouts.
As a secondary benefit, archive-in-progress is moved out of the
way into a /tmp file so that new archival requests for the same
commit will not get fulfilled based on an archive that isn't yet
finished.
This asynchronous system is fairly primitive; request comes in, we'll
spawn off a new goroutine to handle it, then we'll mark it as done.
Status requests will see if the file exists in the final location,
and report the archival as done when it exists.
Fixes#11265
* Archive links: drop initial delay to three-quarters of a second
Some, or perhaps even most, archives will not take all that long to archive.
The archive process starts as soon as the download button is initially
clicked, so in theory they could be done quite quickly. Drop the initial
delay down to three-quarters of a second to make it more responsive in the
common case of the archive being quickly created.
* archiver: restructure a little bit to facilitate testing
This introduces two sync.Cond pointers to the archiver package. If they're
non-nil when we go to process a request, we'll wait until signalled (at all)
to proceed. The tests will then create the sync.Cond so that it can signal
at-will and sanity-check the state of the queue at different phases.
The author believes that nil-checking these two sync.Cond pointers on every
archive processing will introduce minimal overhead with no impact on
maintainability.
* gofmt nit: no space around binary + operator
* services: archiver: appease golangci-lint, lock queueMutex
Locking/unlocking the queueMutex is allowed, but not required, for
Cond.Signal() and Cond.Broadcast(). The magic at play here is just a little
too much for golangci-lint, as we take the address of queueMutex and this is
mostly used in archiver.go; the variable still gets flagged as unused.
* archiver: tests: fix several timing nits
Once we've signaled a cond var, it may take some small amount of time for
the goroutines released to hit the spot we're wanting them to be at. Give
them an appropriate amount of time.
* archiver: tests: no underscore in var name, ungh
* archiver: tests: Test* is run in a separate context than TestMain
We must setup the mutex/cond variables at the beginning of any test that's
going to use it, or else these will be nil when the test is actually ran.
* archiver: tests: hopefully final tweak
Things got shuffled around such that we carefully build up and release
requests from the queue, so we can validate the state of the queue at each
step. Fix some assertions that no longer hold true as fallout.
* repo: Download: restore some semblance of previous behavior
When archival was made async, the GET endpoint was only useful if a previous
POST had initiated the download. This commit restores the previous behavior,
to an extent; we'll now submit the archive request there and return a
"202 Accepted" to indicate that it's processing if we didn't manage to
complete the request within ~2 seconds of submission.
This lets a client directly GET the archive, and gives them some indication
that they may attempt to GET it again at a later time.
* archiver: tests: simplify a bit further
We don't need to risk failure and use time.ParseDuration to get 2 *
time.Second.
else if isn't really necessary if the conditions are simple enough and lead
to the same result.
* archiver: tests: resolve potential source of flakiness
Increase all timeouts to 10 seconds; these aren't hard-coded sleeps, so
there's no guarantee we'll actually take that long. If we need longer to
not have a false-positive, then so be it.
While here, various assert.{Not,}Equal arguments are flipped around so that
the wording in error output reflects reality, where the expected argument is
second and actual third.
* archiver: setup infrastructure for notifying consumers of completion
This API will *not* allow consumers to subscribe to specific requests being
completed, just *any* request being completed. The caller is responsible for
determining if their request is satisfied and waiting again if needed.
* repo: archive: make GET endpoint synchronous again
If the request isn't complete, this endpoint will now submit the request and
wait for completion using the new API. This may still be susceptible to
timeouts for larger repos, but other endpoints now exist that the web
interface will use to negotiate its way through larger archive processes.
* archiver: tests: amend test to include WaitForCompletion()
This is a trivial one, so go ahead and include it.
* archiver: tests: fix test by calling NewContext()
The mutex is otherwise uninitialized, so we need to ensure that we're
actually initializing it if we plan to test it.
* archiver: tests: integrate new WaitForCompletion a little better
We can use this to wait for archives to come in, rather than spinning and
hoping with a timeout.
* archiver: tests: combine numQueued declaration with next-instruction assignment
* routers: repo: reap unused archiving flag from DownloadStatus()
This had some planned usage before, indicating whether this request
initiated the archival process or not. After several rounds of refactoring,
this use was deemed not necessary for much of anything and got boiled down
to !complete in all cases.
* services: archiver: restructure to use a channel
We now offer two forms of waiting for a request:
- WaitForCompletion: wait for completion with no timeout
- TimedWaitForCompletion: wait for completion with timeout
In both cases, we wait for the given request's cchan to close; in the latter
case, we do so with the caller-provided timeout. This completely removes the
need for busy-wait loops in Download/InitiateDownload, as it's fairly clean
to wait on a channel with timeout.
* services: archiver: use defer to unlock now that we can
This previously carried the lock into the goroutine, but an intermediate
step just added the request to archiveInProgress outside of the new
goroutine and removed the need for the goroutine to start out with it.
* Revert "archiver: tests: combine numQueued declaration with next-instruction assignment"
This reverts commit bcc52140238e16680f2e05e448e9be51372afdf5.
Revert "archiver: tests: integrate new WaitForCompletion a little better"
This reverts commit 9fc8bedb5667d24d3a3c7843dc28a229efffb1e6.
Revert "archiver: tests: fix test by calling NewContext()"
This reverts commit 709c35685eaaf261ebbb7d3420e3376a4ee8e7f2.
Revert "archiver: tests: amend test to include WaitForCompletion()"
This reverts commit 75261f56bc05d1fa8ff7e81dcbc0ccd93fdc9d50.
* archiver: tests: first attempt at WaitForCompletion() tests
* archiver: tests: slight improvement, less busy-loop
Just wait for the requests to complete in order, instead of busy-waiting
with a timeout. This is slightly less fragile.
While here, reverse the arguments of a nearby assert.Equal() so that
expected/actual are correct in any test output.
* archiver: address lint nits
* services: archiver: only close the channel once
* services: archiver: use a struct{} for the wait channel
This makes it obvious that the channel is only being used as a signal,
rather than anything useful being piped through it.
* archiver: tests: fix expectations
Move the close of the channel into doArchive() itself; notably, before these
goroutines move on to waiting on the Release cond.
The tests are adjusted to reflect that we can't WaitForCompletion() after
they've already completed, as WaitForCompletion() doesn't indicate that
they've been released from the queue yet.
* archiver: tests: set cchan to nil for comparison
* archiver: move ctx.Error's back into the route handlers
We shouldn't be setting this in a service, we should just be validating the
request that we were handed.
* services: archiver: use regex to match a hash
This makes sure we don't try and use refName as a hash when it's clearly not
one, e.g. heads/pull/foo.
* routers: repo: remove the weird /archive/status endpoint
We don't need to do this anymore, we can just continue POSTing to the
archive/* endpoint until we're told the download's complete. This avoids a
potential naming conflict, where a ref could start with "status/"
* archiver: tests: bump reasonable timeout to 15s
* archiver: tests: actually release timedReq
* archiver: tests: run through inFlight instead of manually checking
While we're here, add a test for manually re-processing an archive that's
already been complete. Re-open the channel and mark it incomplete, so that
doArchive can just mark it complete again.
* initArchiveLinks: prevent default behavior from clicking
* archiver: alias gitea's context, golang context import pending
* archiver: simplify logic, just reconstruct slices
While the previous logic was perhaps slightly more efficient, the
new variant's readability is much improved.
* archiver: don't block shutdown on waiting for archive
The technique established launches a goroutine to do the wait,
which will close a wait channel upon termination. For the timeout
case, we also send back a value indicating whether the timeout was
hit or not.
The timeouts are expected to be relatively small, but still a multi-
second delay to shutdown due to this could be unfortunate.
* archiver: simplify shutdown logic
We can just grab the shutdown channel from the graceful manager instead of
constructing a channel to halt the caller and/or pass a result back.
* Style issues
* Fix mis-merge
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
- Introduce new .code-inner class that sets the CSS attributes on
rendered code lines like view,blame and diff.
- Rename .wrap class to .word-break to reflect what it actually does
- Remove .raw which was only used on webhook page
- Set white-space: pre-wrap except on blame where it can break the
layout
Fixes: https://github.com/go-gitea/gitea/issues/13406
* Migrating reactions is just not that important
A failure during migrating reactions should not cause failure of
migration.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* When checking issue reactions check the correct permission
Signed-off-by: Andrew Thornton <art27@cantab.net>
* And there is another one ...
Signed-off-by: Andrew Thornton <art27@cantab.net>
