During registration, one may be required to give their email address, to
be verified and activated later. However, if one makes a mistake, a
typo, they may end up with an account that cannot be activated due to
having a wrong email address.
They can still log in, but not change the email address, thus, no way to
activate it without help from an administrator.
To remedy this issue, lets allow changing the email address for logged
in, but not activated users.
This fixes gitea#17785.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit aaaece28e4c6a8980cef932e224e84933d7c9262)
(cherry picked from commit 639dafabec0a5c1f943b44ca02f72c5ba2fc5e10)
(cherry picked from commit d699c12cebea7dbbda950ae257a46d53c39f22ea)
[GITEA] Allow changing the email address before activation (squash) cache is always active
This needs to be revisited because the MailResendLimit is not enforced
and turns out to not be tested.
See e7cb8da2a8 * Always enable caches (#28527)
(cherry picked from commit 43ded8ee30ab5c7a40a456600cdaa8a0fbdccec2)
Rate limit pre-activation email change separately
Changing the email address before any email address is activated should
be subject to a different rate limit than the normal activation email
resending. If there's only one rate limit for both, then if a newly
signed up quickly discovers they gave a wrong email address, they'd have
to wait three minutes to change it.
With the two separate limits, they don't - but they'll have to wait
three minutes before they can change the email address again.
The downside of this setup is that a malicious actor can alternate
between resending and changing the email address (to something like
`user+$idx@domain`, delivered to the same inbox) to effectively halving
the rate limit. I do not think there's a better solution, and this feels
like such a small attack surface that I'd deem it acceptable.
The way the code works after this change is that `ActivatePost` will now
check the `MailChangeLimit_user` key rather than `MailResendLimit_user`,
and if we're within the limit, it will set `MailChangedJustNow_user`. The
`Activate` method - which sends the activation email, whether it is a
normal resend, or one following an email change - will check
`MailChangedJustNow_user`, and if it is set, it will check the rate
limit against `MailChangedLimit_user`, otherwise against
`MailResendLimit_user`, and then will delete the
`MailChangedJustNow_user` key from the cache.
Fixes#2040.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit e35d2af2e56f4ecb3a4f6d1109d02c8aa1a6d182)
(cherry picked from commit 03989418a70d3445e0edada7fbe5a4151d7836b1)
(cherry picked from commit f50e0dfe5e90d6a31c5b59e687580e8b2725c22b)
(cherry picked from commit cad9184a3653e6c80de2e006a0d699b816980987)
(cherry picked from commit e2da5d7fe13a685606913a131687a94f9f5fcfeb)
(cherry picked from commit 3a80534d4db523efe56b368489f81dc1cb2c99f7)
Similar to how some other parts of the web UI support a `/latest` path
to directly go to the latest of a certain thing, let the Actions web UI
do the same: `/{owner}/{repo}/actions/runs/latest` will redirect to the
latest run, if there's one available.
Fixes gitea#27991.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit f67ccef1dd3146b0b942a94e2482b37595180e91)
Code cleanup in the actions.ViewLatest route handler
Based on feedback received after the feature was merged, use
`ctx.NotFound` and `ctx.ServerError`, and drop the use of the
unnecessary `ctx.Written()`.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 74e42da5630f9148faaf6b03bf1ac5724fa86b25)
(cherry picked from commit f7535a1cef96ce0589f37907f88b024cd095d0ac)
(cherry picked from commit 1a90cd37c31a1b9c770d6d79a4663ed8d67845c0)
(cherry picked from commit d86d71340afd372e5b5083d5563c2f5b48d975e6)
(cherry picked from commit 9e5cce1afccebcd6146e5e0d364bfdbb840b5276)
(cherry picked from commit 2013fb3fab5e23d0088434d835411f26a3fd9905)
(cherry picked from commit 88b9d21d1194abd133c3b4cbaa19792da433cb43)
(cherry picked from commit 72c020298eebcb0c90e23e7ff35e37be867afc44)
(cherry picked from commit 6525f730dfdd7cb412762d9e30348801335d17ee)
- Switch the supported schemas for the Swagger API around, such that
https is the first one listed. This ensures that when the Swagger API is
used it will default to the https schema, which is likely the schema you
want to use in the majority of the cases.
- Resolves#1895
BREAKING CHANGE NOTICE:
If you are using the Swagger API JSON directly to communicate with the
Forgejo API, the library you are using may be using the first schema
defined in the JSON file (e.g. https://code.forgejo.org/swagger.v1.json)
to construct the request url, this used to be `http` but has now changed
to `https`. This can cause failures if you want to send the swagger
request over `http` (and there is no HTTPS redirection configured).
(cherry picked from commit 81e5f438868192e9cca46824ceb3db787bdd8629)
(cherry picked from commit d847469ea278e77ed4fd6147dd54025ce222ebc9)
(cherry picked from commit 96e75e1d5ca97cd4c668fc60d444dc91c98e83a6)
(cherry picked from commit 65baa6426109403f0b8a779b061f7733d8034ba7)
(cherry picked from commit cd3e0a74e6a7bb90da6f069b7fea0796d5f3d775)
(cherry picked from commit a3127e90b21660d1d7efb6dd536f5fb5619d3307)
(cherry picked from commit 2b22272dc588ee6c2c4081b087f5b87b82ac52c8)
(cherry picked from commit 7363790592b10c4fc52266fd0c33ed79454cd276)
(cherry picked from commit 432b9a4451997742df50d3db33285f2dd5ea0bef)
- Add a dropdown to the web interface for changing files to select which
Email should be used for the commit. It only shows (and verifies) that a
activated mail can be used, while this isn't necessary, it's better to
have this already in place.
- Added integration testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/281
(cherry picked from commit 564e701f407c0e110f3c7a4102bf7ed7902b815f)
(cherry picked from commit de8f2e03cc7d274049dd6a849b3d226968782644)
(cherry picked from commit 0182cff12ed4b68bd49ebc2b9951d9a29f7a36ca)
(cherry picked from commit 9c74254d4606febd702315c670db4fb6b14040a1)
(cherry picked from commit 2f0b68f821ae53dd12b496cc660353d5bf7cd143)
(cherry picked from commit 079b995d49ba7a625035fe9ec53741f6b0112007)
(cherry picked from commit 6952ea6ee3de8157d056c4381de7529de6eaef7b)
(cherry picked from commit 6c7d5a5d140152be80ec38a979a2a7b704ce653a)
(cherry picked from commit 49c39f0ed5a011b26f2e33f35811bb31fab3cf64)
(cherry picked from commit a8f9727388192c6c22b2f8cbbae15a96203ec3b6)
- Be more liberal in what Forgejo accepts, by reducing the minimum
amount of characters for SHA to 4 characters, which is the minimum
amount that Git needs in order to figure out which commit was meant.
- It's safe to reduce this requirements, as commits are passed to Git
which will error if the given commit ID results in more than one Git
object. Forgejo will catch this error as that the Commit doesn't exist,
which is a error that's already being handled in most places gracefully.
- Added integration testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1760
(cherry picked from commit 0d655c7384b081c36aa4c6b7167280f52c1c42d3)
(cherry picked from commit 9b9aca2a02b06f41f6db847a77ea29f6385b46d2)
(cherry picked from commit 0d0ab1af1fb05e26168c112523f1400fef67f9b0)
(cherry picked from commit d3b352c85482e59c9d1da24a8fe0eb68b0f5858e)
(cherry picked from commit d6af2094df4611d590d8c5062743f5e39f2a7bd8)
(cherry picked from commit f96e55a7a9f06ff987a5e9663da492720d162b76)
(cherry picked from commit bb6261f8479ee8925ddc7f0079b414ef85f04d73)
(cherry picked from commit f6a4146161fda22341c17dc74d42fd13ad181e1f)
(cherry picked from commit ed0292137991d08ee2e6518e74ec221f94f51415)
Conflicts:
routers/web/web.go
https://codeberg.org/forgejo/forgejo/pulls/2214
(cherry picked from commit 768377cb02b180d49dd025eb373dd8ab6d787cf7)
(cherry picked from commit 2cebe3ef94e6db45091ca8f02b2ed770b23564d6)
- If you attempted to get a branch feed on a empty repository, it would
result in a panic as the code expects that the branch exists.
- `context.RepoRefByType` would normally already 404 if the branch
doesn't exist, however if a repository is empty, it would not do this
check.
- Fix bug where `/atom/branch/*` would return a RSS feed.
(cherry picked from commit d27bcd98a41b69e313535e5e91e4272136a4bab1)
(cherry picked from commit c58566403df728c1f71b1dd554a573c011a59d7e)
(cherry picked from commit b8b3f6ab8b576a28ed06cc0e501b14950cf78282)
(cherry picked from commit 195520100b214d6bf7a2740507f0a7ae10e5a7d1)
(cherry picked from commit 6e417087ddf41e79a146366a5db157c7a76af615)
(cherry picked from commit ff91e5957ac728118cddb06bddd95d32cb4df815)
(cherry picked from commit 6626d5cc75681d3b16b4496a4e0e83a257a3f46a)
(cherry picked from commit 62f8ab793b12251e1793bc14ace95cda76121baa)
(cherry picked from commit e5bbf1a2d060b4ef1324afd8ed9b38e294b3dffb)
(cherry picked from commit f5b8c8edea5d17ba51327684a6e8127ac0f09503)
(cherry picked from commit 50948fa11b9c9ccac9e86dc9943bad71cf189370)
(cherry picked from commit 83a9f7f4429ac4e91d7a80a0aced32cd74bbfc4c)
(cherry picked from commit 679438b5d621fd58d0618c28cd08abe0a5625037)
(cherry picked from commit 17db07d6d0fcf40980129274e35ca76306dd205f)
- https://github.com/NYTimes/gziphandler doesn't seems to be maintained
anymore and Forgejo already includes
https://github.com/klauspost/compress which provides a maintained and
faster gzip handler fork.
- Enables Jitter to prevent BREACH attacks, as this *seems* to be
possible in the context of Forgejo.
(cherry picked from commit cc2847241d82001babd8d40c87d03169f21c14cd)
(cherry picked from commit 99ba56a8761dd08e08d9499cab2ded1a6b7b970f)
Conflicts:
go.sum
https://codeberg.org/forgejo/forgejo/pulls/1581
(cherry picked from commit 711638193daa2311e2ead6249a47dcec47b4e335)
(cherry picked from commit 9c12a37fde6fa84414bf332ff4a066facdb92d38)
(cherry picked from commit d13065345431a499f9e0b7a3c2043d7487b8aa5b)
(cherry picked from commit 45a16f8c3c6f7d5e4aab8fdde6a621cf36e4801c)
(cherry picked from commit a497acb31f76d580c8b0567f9461274bd78080f4)
(cherry picked from commit fe87fd828973945192b98310c5c3b2001c6e0f86)
(cherry picked from commit 6ac12e6693cf45cb12109028dabd868957c4b74c)
(cherry picked from commit 981ec37e1e72ab19c20067ff4d2a7e20a60d3305)
(cherry picked from commit 5d6892ec10086f0ba63f26693faa82d0fd4e3f4a)
(cherry picked from commit 9df7968f4fc72de9788d84ca3f349e4c98ee630e)
(cherry picked from commit 7d588d183329cd760053663ea2e1e82e62958409)
Conflicts:
routers/web/web.go
https://codeberg.org/forgejo/forgejo/pulls/2075
(cherry picked from commit defb101281f5a6ba410abc763674bafa7b63dffd)
(cherry picked from commit 5830f204a17767fda3e45d16dbf3af8c32e7f387)
(cherry picked from commit 029f4e98636a7776f430684e9d7142d69a444f96)
(cherry picked from commit 816fe558126d0ecce969fdf2a196fa6afdcca792)
Conflicts:
go.sum
https://codeberg.org/forgejo/forgejo/pulls/2249
(cherry picked from commit 99866d804560b415b6158371eb0efd17d097cfe0)
- Add a indication to the file history if the file has been renamed,
this indication contains a link to browse the history of the file
further.
- Added unit testing.
- Added integration testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1279
(cherry picked from commit 72c297521b1830360aab4b50e37efcc7e67e0d5d)
(cherry picked from commit 283f9648947f8dd2f315ecca19566ccca2b49c18)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/1550
(cherry picked from commit 7c30af7fdee08efd02041c01abca47394a69bb8b)
(cherry picked from commit f3be6eb269526a9f4ea7861189f07977f2d4a32f)
(cherry picked from commit 78e1755b94c18c043e0c8f8c2849803cc8069feb)
(cherry picked from commit 73799479e0fb68534dac10f809ee246dbc809b62)
(cherry picked from commit 938359b94120b7ea7bcdfbfda265ada691620da1)
(cherry picked from commit b168a9c081f93c10d40319333fc24d68a4f9763c)
[GITEA] Detect file rename and show in history (squash) ctx.Locale
(cherry picked from commit 40447752ff97aa306295685dcf4ddd3b13f48320)
(cherry picked from commit ea23594cdbb12c32dc28638f65bf40e37d344e5f)
(cherry picked from commit cdc473850c85abcbe38c799c2d2446966978f2b2)
(cherry picked from commit 86e6641c29df213d7db1b85867dafebcafeee1dd)
(cherry picked from commit 2757de586b80834513e61033692ac72d25381431)
(cherry picked from commit def4ae32ddb4b0b83f6bb9c197e00fdcd784928e)
(cherry picked from commit 6dada09329e28840f7ad890bed333ae122838fb2)
(cherry picked from commit 5d6d5272513629b126917c30f7bfde421fdcbe27)
Conflicts:
tests/integration/repo_test.go
https://codeberg.org/forgejo/forgejo/pulls/2119
(cherry picked from commit d3c1bce7db31b243a7142b71bf4af36506752e6e)
(cherry picked from commit 04bcb22d5c00d1fa8b39e2a3cf2e73f0a8c1204f)
(cherry picked from commit e16241fd992c22203d113a4a11e7f57f9ed2ddb3)
(cherry picked from commit 8e2beb3ed5da1ac8a58608acdf059f607576ff96)
Sends email with information on the new user (time of creation and time of last sign-in) and a link to manage the new user from the admin panel
closes: https://codeberg.org/forgejo/forgejo/issues/480
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1371
Co-authored-by: Aravinth Manivannan <realaravinth@batsense.net>
Co-committed-by: Aravinth Manivannan <realaravinth@batsense.net>
(cherry picked from commit c721aa828ba6aec5ef95459cfc632a0a1f7463e9)
(cherry picked from commit 6487efcb9da61be1f802f1cd8007330153322770)
Conflicts:
modules/notification/base/notifier.go
modules/notification/base/null.go
modules/notification/notification.go
https://codeberg.org/forgejo/forgejo/pulls/1422
(cherry picked from commit 7ea66ee1c5dd21d9e6a43f961e8adc71ec79b806)
Conflicts:
services/notify/notifier.go
services/notify/notify.go
services/notify/null.go
https://codeberg.org/forgejo/forgejo/pulls/1469
(cherry picked from commit 7d2d9970115c94954dacb45684f9e3c16117ebfe)
(cherry picked from commit 435a54f14039408b315c99063bdce28c7ef6fe2f)
(cherry picked from commit 8ec7b3e4484383445fa2622a28bb4f5c990dd4f2)
[GITEA] notifies admins on new user registration (squash) performance bottleneck
Refs: https://codeberg.org/forgejo/forgejo/issues/1479
(cherry picked from commit 97ac9147ff3643cca0a059688c6b3c53479e28a7)
(cherry picked from commit 19f295c16bd392aa438477fa3c42038d63d1a06a)
(cherry picked from commit 3367dcb2cf5328e2afc89f7d5a008b64ede1c987)
[GITEA] notifies admins on new user registration (squash) cosmetic changes
Co-authored-by: delvh <dev.lh@web.de>
(cherry picked from commit 9f1670e040b469ed4346aa2689a75088e4e71c8b)
(cherry picked from commit de5bb2a224ab2ae9be891de1ee88a7454a07f7e9)
(cherry picked from commit 8f8e52f31a4da080465521747a2c5c0c51ed65e3)
(cherry picked from commit e0d51303129fe8763d87ed5f859eeae8f0cc6188)
(cherry picked from commit f1288d6d9bfc9150596cb2f7ddb7300cf7ab6952)
(cherry picked from commit 1db4736fd7cd75027f3cdf805e0f86c3a5f69c9d)
(cherry picked from commit e8dcbb6cd68064209cdbe054d5886710cbe2925d)
(cherry picked from commit 09625d647629b85397270e14dfe22258df2bcc43)
[GITEA] notifies admins on new user registration (squash) ctx.Locale
(cherry picked from commit dab7212fad44a252a1acf8da71b254b1a6715121)
(cherry picked from commit 9b7bbae8c4cd5dc4d36726f10870462c8985e543)
(cherry picked from commit f750b71d3db9a24dc2722effb8bbc2dded657cbb)
(cherry picked from commit f79af366796a8ab581bbfa1f5609dc721798ae68)
(cherry picked from commit e76eee334e446a45d841caf19a7c18eab89ca457)
[GITEA] notifies admins on new user registration (squash) fix locale
(cherry picked from commit 54cd100d8da37ccb0a545e2545995066f92180f0)
(cherry picked from commit 053dbd3d50d3c7d1afae8d31c25bda92ceb8f8c0)
[GITEA] notifies admins on new user registration (squash) fix URL
1. Use absolute URL in the admin panel link sent on new registrations
2. Include absolute URL of the newly signed-up user's profile.
New email looks like this:
<details><summary>Please click to expand</summary>
```
--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain; charset=UTF-8
User Information: @realaravinth ( http://localhost:3000/realaravinth )
----------------------------------------------------------------------
* Created: 2023-12-13 19:36:50 +05:30
Please click here ( http://localhost:3000/admin/users/9 ) to manage the use=
r from the admin panel.
--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html; charset=UTF-8
<!DOCTYPE html>
<html>
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dutf-8">
<title>New user realaravinth just signed up</title>
<style>
blockquote { padding-left: 1em; margin: 1em 0; border-left: 1px solid gre=
y; color: #777}
.footer { font-size:small; color:#666;}
</style>
</head>
<body>
<ul>
<h3>User Information: <a href=3D"http://localhost:3000/realaravinth">@rea=
laravinth</a></h3>
<li>Created: <relative-time format=3D"datetime" weekday=3D"" year=3D"nume=
ric" month=3D"short" day=3D"numeric" hour=3D"numeric" minute=3D"numeric" se=
cond=3D"numeric" datetime=3D"2023-12-13T19:36:50+05:30">2023-12-13 19:36:50=
+05:30</relative-time></li>
</ul>
<p> Please <a href=3D"http://localhost:3000/admin/users/9" rel=3D"nofollow=
">click here</a> to manage the user from the admin panel. </p>
</body>
</html>
--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770--
```
</details>
fixes: https://codeberg.org/forgejo/forgejo/issues/1927
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1940
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: Aravinth Manivannan <realaravinth@batsense.net>
Co-committed-by: Aravinth Manivannan <realaravinth@batsense.net>
(cherry picked from commit b8d764e36a0cd8e60627805f87b84bb04152e9c1)
(cherry picked from commit d48b84f623e369222e5e15965f22e27d74ff4243)
Conflicts:
routers/web/auth/auth.go
https://codeberg.org/forgejo/forgejo/pulls/2034
(cherry picked from commit 02d3c125ccc97638849af33c7df315cbcb368127)
(cherry picked from commit 367374ecc3832bb47d29ff79370103f907d0ca99)
Conflicts:
models/user/user_test.go
https://codeberg.org/forgejo/forgejo/pulls/2119
(cherry picked from commit 4124fa5aa41c36b3ab3cc1c65d0e3d5e05ec4086)
(cherry picked from commit 7f12610ff63d4907631d8cddcd7a49ae6f6e1508)
[GITEA] notifies admins on new user registration (squash) DeleteByID
trivial conflict because of
778ad795fd Refactor deletion (#28610)
(cherry picked from commit 05682614e5ef2462cbb6a1635ca01e296fe03d23)
(cherry picked from commit 64bd374803a76c97619fe1e28bfc74f99ec91677)
(cherry picked from commit 63d086f666a880b48d034b129e535fcfc82acf7d)
(cherry picked from commit 3cd48ef4d53c55a81c97f1b666b8d4ba16a967c4)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/2249
(cherry picked from commit 6578ec4ed64c8624bc202cefb18d67870eec1336)
Conflicts:
routers/web/auth/auth.go
https://codeberg.org/forgejo/forgejo/pulls/2300
- The `<title>` element that lives inside the `<head>` element is an important element that gives browsers and search engine crawlers the title of the webpage, hence the element name. It's therefor important that this title is accurate.
- Currently there are three issues with titles on repositories. It doesn't use the `FullName` and instead only uses the repository name, this doesn't distinguish which user or organisation the repository is on. It doesn't show the full treepath in the title when visiting an file inside a directory and instead only uses the latest path in treepath. It can show the repository name twice if the `.Title` variable also included the repository name such as on the repository homepage.
- Use the repository's fullname (which include which user the repository is on) instead of just their name.
- Display the repository's fullname if it isn't already in `.Title`.
- Use the full treepath in the repository code view instead of just the
last path.
- Adds integration tests.
- Adds a new repository (`repo59`) that has 3 depths for folders, which
wasn't in any other fixture repository yet, so the full treepath for
could be properly tested.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1276
(cherry picked from commit ff9a6a2cda34cf2b2e392cc47125ed0f619b287b)
(cherry picked from commit 76dffc862103eb23d51445ef9d611296308c8413)
(cherry picked from commit ff0615b9d0f3ea4bd86a28c4ac5b0c4740230c81)
(cherry picked from commit 8712eaa394053a8c8f1f4cb17307e094c65c7059)
(cherry picked from commit 0c11587582b8837778ee85f4e3b04241e5d71760)
(cherry picked from commit 3cbd9fb7922177106b309f010dd34a68751873dc)
Conflicts:
tests/integration/repo_test.go
https://codeberg.org/forgejo/forgejo/pulls/1512
(cherry picked from commit fbfdba8ae9e7cb9811452b30d5424fca41231a1f)
Conflicts:
models/fixtures/release.yml
https://codeberg.org/forgejo/forgejo/pulls/1550
(cherry picked from commit 8b2bf0534ca6a2241c2a10cbecd7c96fb96558a6)
(cherry picked from commit d706d9e222469c689eb069ec609968296657dfdc)
(cherry picked from commit 6d46261a3f81d3642b313e76ad93c5f72fbd6bf8)
(cherry picked from commit f864d18ad30760bd1e2fb1925b87b19e3208ad97)
(cherry picked from commit 80f8620d0d746c7ce5e88eeef3ec62431c399ec8)
[GITEA] Improve HTML title on repositories (squash) do not double escape
(cherry picked from commit 22882fe25cde57837a31738a10c71c9478e16662)
(cherry picked from commit 63e99df3d1ecb50da3b723848ca85d56b831a8d7)
(cherry picked from commit b65d777bc78fabf7e3d1bf8c50aff4eb5395d783)
(cherry picked from commit 2961f4f6320b4b38c33f33e7133e7f3d3f86bd0f)
(cherry picked from commit f7f723628c76c5c2a0678139fbc4264feea352ea)
(cherry picked from commit 9ed79158268160f62dc1b32183c9a487cd521ef7)
(cherry picked from commit 8b9ead46085b8a7f1a9c63f561bce4795ccca31d)
(cherry picked from commit 50eeaf1fbcf01d8616d8ea792a3b3cd736137f89)
(cherry picked from commit ee6f32820e5e0e4ea2ae61fc6a72c475e805b5ac)
(cherry picked from commit bf337bed3507a6554bbdd738e6ca1aa80d00df20)
(cherry picked from commit 6be9501ec0c6eceda8faa48a4d1dc875da702880)
(cherry picked from commit b39860570df95a860c151122a259becb6a221c0e)
(cherry picked from commit 3f30f486d516cac043dbdcd780b2277b6a3278d7)
(cherry picked from commit 5680ecdbe9b668ce69e5a55b2dd7fb7c0eb7087b)
(cherry picked from commit da6a19ad16bd9014ac37e02f10095880baeac65c)
(cherry picked from commit 5462493a77dc6f2bf8a0e07e6fbfbe9cce157bcd)
(cherry picked from commit 530fe57ddea58aab0d4bfb3b8373a8f4e1632514)
(cherry picked from commit f174f35644b2405567a97f6720a55f6cc5fe4f61)
Conflicts:
models/fixtures/repository.yml
https://codeberg.org/forgejo/forgejo/pulls/2214
(cherry picked from commit 75212b3a59b853df59f6fafab2542f9a2dd82ca3)
(cherry picked from commit 6e3c0be5555076b1f8ef645b809b7d89deb4e1ad)
- The code and tests are already there to allow releases to be created
on commits.
- This patch modifies the web code to take into account that an commitID
could've been passed as target.
- Added unit test.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1196
(cherry picked from commit 90863e0ab51d1b243f67de266bbeeb7a9031c525)
(cherry picked from commit c805aa23b5c6c9a8ab79e2e66786a4ef798e827a)
(cherry picked from commit cf45567ca60b2a9411694c8e9b649fd77c64bdae)
(cherry picked from commit 672a2b91e5612f438bd7951d173f42c223629fd1)
(cherry picked from commit 82c930152cd693f8451e9553504365c724e1fced)
(cherry picked from commit 95ac2508b3e8dd9fc2b0168600d989dbce0744ec)
(cherry picked from commit b13a81ab98a02e30d1b508bb89cdd67a05eae782)
(cherry picked from commit 9f463a7c1fa74ce17ab6ff8df49e2bcea3c1bc89)
(cherry picked from commit 758ce84dc58e0c689e0fcc34386c7a8ed50f3df9)
Conflicts:
tests/integration/release_test.go
https://codeberg.org/forgejo/forgejo/pulls/1550
(cherry picked from commit edf0531aeead2f68bbb283e437494ace33a8d3b8)
(cherry picked from commit 44b29f3a1df81c072737b139cad34435313f086c)
(cherry picked from commit b851b674195ecf3020aba55c5f46704fa3405289)
(cherry picked from commit 37b408f5aac53bf72cd530722c774d7ace8356e1)
(cherry picked from commit e81dbedb88a8601cf5a071176ecdbf29a0018cc1)
(cherry picked from commit d5fa6be6ecc789448a45d4968ead4f958c33040b)
(cherry picked from commit b8c4be25297401bc570dbff41bf312545ade4b54)
(cherry picked from commit f23ce2843c59e442f63a240862d0d2e009a6eff2)
(cherry picked from commit 8b7bcabae27bc5f66c72c44693e1d051231d2a79)
(cherry picked from commit 2d6e52dda9b7f5fd29d7700f9a7835627aeada90)
(cherry picked from commit 42e4f3ffdd211d3bb45e505a0cf632172bcbf6b2)
(cherry picked from commit 39a1f689d8cb7a741cb10c35d4748fb54ecec34a)
(cherry picked from commit 553d4872f883b8ac5cd6e9e585c599201b06067a)
(cherry picked from commit df3743372576e708b03fe253eac0f37901a524be)
(cherry picked from commit d67eac487b6d5120cf7d4976b9c426eb4d00013a)
(cherry picked from commit 28cb0b191212457f90b661261b9d56ebc9e6e6bc)
(cherry picked from commit 031c04c579a24cb05bcd662f085f538954cd34ef)
- Resolves#271
- Ensure that the adminstrator password is at least `MIN_PASSWORD_LENGTH`.
(cherry picked from commit 28cb04c3f5040980e716ce66cd5906f324257e02)
(cherry picked from commit 95371ebd92cd005e2d50a4754e60525cf6135b86)
(cherry picked from commit a134288ab6b0291082d913c4e22456b31af58af9)
(cherry picked from commit 4202f052cb32aec71a61dd2afd814035a9d85eea)
(cherry picked from commit 510b7467d3ee0bf346ad1843775affe1df0675ae)
(cherry picked from commit f3a6e1f121e89aaf608fd9890eaf06ed939d1006)
(cherry picked from commit f340508819866f355feec6d01b349fa7df29ace9)
(cherry picked from commit b891bb176d48c3855cc5b6e4573e7a337af9d382)
(cherry picked from commit 1a1bfc38cc7863f5cb3022560cacb2006d08f113)
(cherry picked from commit 083d5aefed10e54814c4438eabcd01973d305502)
(cherry picked from commit 4586096be9b6214058245da3227541866ea4312f)
(cherry picked from commit 039fa20cc8a5b50d5cc37de4503e8a9a80042bcc)
(cherry picked from commit 3ec9cb5f5915cd0bd46ca0d20d0ab798dc7bd135)
(cherry picked from commit 00be0eee3727130966c34a3b95b10f2af06ea2ec)
(cherry picked from commit a1566030025df8cc83d20cbe2b6fb0f87304a1a5)
(cherry picked from commit 4d305e77742c181f68cd24724dfc685723a41b31)
(cherry picked from commit 51e8f21202ea766d69a4b3c26f44c6db07f47844)
(cherry picked from commit 58e354c98e6b361f6d651ffdca3d5cb459adbf2f)
(cherry picked from commit 20405564f56775ba0f29a54c9a6eca8136d8ac99)
(cherry picked from commit 1d7f49568319cfa49e9c8338f2375432f4917739)
(cherry picked from commit d457b9c9111c04ffcd26ff859e2ad804697c2621)
(cherry picked from commit 72b54bc4cce030540310e50acc41ea789a1e5221)
(cherry picked from commit d7ce723e350d21ef42eba7b7013543e2ba6e0e17)
(cherry picked from commit ce5f863d5d3eff77b9736db453f0f9a65241c9bb)
(cherry picked from commit 324b9318acbf5e12be922ee7f8fc0f0fece1743a)
(cherry picked from commit fff11fc535c1a1122914170363bfc23aeb52e02c)
(cherry picked from commit d3fa04aa699883df9b227382190f57726c591cb8)
(cherry picked from commit d3b24691f389d863be834ccc8b2c8910b1614f30)
(cherry picked from commit 736dfab3ae943fb1b87a5468248c5d80887a5e7c)
(cherry picked from commit 8be95ef7f41c9e1d343a89cbfe67bdccc01df1f8)
(cherry picked from commit 0ce04d93a858a61d322750906629ce7da0e22116)
Refs: https://codeberg.org/forgejo/forgejo/pulls/2222
(cherry picked from commit 5f837efc15f3d1e0d7fbed7fc569251143266584)
fix: write xml header
(cherry picked from commit a715984a42be9da81c48106d5eae244098ac1108)
fix: optional elements and xml schema
(cherry picked from commit 6ea6895a3616246e7282aa20d8f010fa931b60ea)
fix: pass all other requests to file search
(cherry picked from commit 9bfc74833a3b657453b4519573598432a87e3e3c)
test: add integration test
(cherry picked from commit b798f4ce86daa78e694c5c142e6f5f44938e6cb6)
fix: use xmlResponse
(cherry picked from commit 7f76df0b246c64fac0eeb115642c8cb6eb676f36)
(cherry picked from commit e18d574ca40905aec52fbbe8247ba83fd01874dd)
[GITEA] Fix cancelled migration deletion modal
- https://codeberg.org/forgejo/forgejo/pulls/1473 made that dangerous
actions such as deletion also would need to type in the owner's name.
This was apparently not reflected to the deletion modal for migrations
that failed or were cancelled.
(cherry picked from commit c38dbd6f889aeb52745eddb276225acd0153cba6)
(cherry picked from commit 7c07592d01b086b612195367c6a13560e5539767)
(cherry picked from commit 78637af2b6440ae307de5e21b284c08c02dd4d13)
[SHARED] make confirmation clearer for dangerous actions
- Currently the confirmation for dangerous actions such as transferring
the repository or deleting it only requires the user to ~~copy paste~~
type the repository name.
- This can be problematic when the user has a fork or another repository
with the same name as an organization's repository, and the confirmation
doesn't make clear that it could be deleting the wrong repository. While
it's mentioned in the dialog, it's better to be on the safe side and
also add the owner's name to be an element that has to be typed for
these dangerous actions.
- Added integration tests.
(cherry picked from commit bf679b24dd23c9ed586b9439e293bbd27cc89232)
(cherry picked from commit 1963085dd9d1521b7a4aa8558d409bd1a9f2e1da)
(cherry picked from commit fb94095d1992c3e47f03e0fccc98a90707a5271b)
(cherry picked from commit e1d1e46afee6891becdb6ccd027fc66843b56db9)
(cherry picked from commit 93993029e4ec8a20a8bc38d80bb4b801e52ee1b7)
(cherry picked from commit df3b058179d8f3e06cc6fb335b287c72c8952821)
(cherry picked from commit 8ccc6b9cba46a736665e4b25523da0baf1679702)
(cherry picked from commit 9fbe28fca35e3d02c23521e063679775ec0792f8)
(cherry picked from commit 4ef2be6dc705c693735e024b28fd7dac3de39d47)
https://codeberg.org/forgejo/forgejo/pulls/1873
Moved test from repo_test.go to forgejo_confirmation_repo_test.go to
avoid conflicts.
(cherry picked from commit 83cae67aa3fe8f9eb732f86020e58b9ea4d8b5ec)
(cherry picked from commit 447009ff568a542985f6b3a9bc7237b9de3e3c54)
(cherry picked from commit 72c0a6150aee7c3a965c87e7348faa2b48c520de)
(cherry picked from commit 8ee9c070b98f64263d63dfef32d54bdad5f0d266)
(cherry picked from commit 89aba06403be898adbfff6b2d7bb01aad239a87c)
(cherry picked from commit 798407599f3d77bdd8bad5fa7abba81d417cd916)
(cherry picked from commit 41c9a2606bd8d7036e7d54ad7ab35af06ec99a34)
(cherry picked from commit a57b214e366435240c4a210115c6a3fda0d37f8b)
(cherry picked from commit fd287a91349bc7844544f9b6ff88e46157d3dc80)
- This is a 'front-port' of the already existing patch on v1.21 and
v1.20, but applied on top of what Gitea has done to rework the LTA
mechanism. Forgejo will stick with the reworked mechanism by the Forgejo
Security team for the time being. The removal of legacy code (AES-GCM) has been
left out.
- The current architecture is inherently insecure, because you can
construct the 'secret' cookie value with values that are available in
the database. Thus provides zero protection when a database is
dumped/leaked.
- This patch implements a new architecture that's inspired from: [Paragonie Initiative](https://paragonie.com/blog/2015/04/secure-authentication-php-with-long-term-persistence#secure-remember-me-cookies).
- Integration testing is added to ensure the new mechanism works.
- Removes a setting, because it's not used anymore.
(cherry picked from commit e3d6622a63da9c33eed1e3d102cf28a92ff653d6)
(cherry picked from commit fef1a6dac5e25579e42d40209c4cfc06879948b9)
(cherry picked from commit b0c5165145fa52f2f7bbec1f50b308bdf1d20ef3)
(cherry picked from commit 7ad51b9f8d0647eecacd258f6ee26155da3872e1)
(cherry picked from commit 64f053f3834e764112cde26bb0d16c5e88d6b2af)
(cherry picked from commit f5e78e4c204ce50b800645d614218b6b6096eecb)
Conflicts:
services/auth/auth_token_test.go
https://codeberg.org/forgejo/forgejo/pulls/2069
(cherry picked from commit f69fc23d4bbadf388c7857040ee0774b824e418e)
(cherry picked from commit d955ab3ab02cbb7f1245a8cddec426d64d3ac500)
(cherry picked from commit 9220088f902a25c4690bcabf5a40a8d02e784182)
(cherry picked from commit c73ac636962c41c71814c273510146f0533264ab)
(cherry picked from commit 747a176048ea93085b406429db0e25bb21912eda)
Conflicts:
models/user/user.go
routers/web/user/setting/account.go
https://codeberg.org/forgejo/forgejo/pulls/2295
This field adds the possibility to set the update date when modifying
an issue through the API.
A 'NoAutoDate' in-memory field is added in the Issue struct.
If the update_at field is set, NoAutoDate is set to true and the
Issue's UpdatedUnix field is filled.
That information is passed down to the functions that actually updates
the database, which have been modified to not auto update dates if
requested.
A guard is added to the 'EditIssue' API call, to checks that the
udpate_at date is between the issue's creation date and the current
date (to avoid 'malicious' changes). It also limits the new feature
to project's owners and admins.
(cherry picked from commit c524d33402c76bc4cccea2806f289e08a009baae)
Add a SetIssueUpdateDate() function in services/issue.go
That function is used by some API calls to set the NoAutoDate and
UpdatedUnix fields of an Issue if an updated_at date is provided.
(cherry picked from commit f061caa6555e0c9e922ee1e73dd2e4337360e9fe)
Add an updated_at field to the API calls related to Issue's Labels.
The update date is applied to the issue's comment created to inform
about the modification of the issue's labels.
(cherry picked from commit ea36cf80f58f0ab20c565a8f5d063b90fd741f97)
Add an updated_at field to the API call for issue's attachment creation
The update date is applied to the issue's comment created to inform
about the modification of the issue's content, and is set as the
asset creation date.
(cherry picked from commit 96150971ca31b97e97e84d5f5eb95a177cc44e2e)
Checking Issue changes, with and without providing an updated_at date
Those unit tests are added:
- TestAPIEditIssueWithAutoDate
- TestAPIEditIssueWithNoAutoDate
- TestAPIAddIssueLabelsWithAutoDate
- TestAPIAddIssueLabelsWithNoAutoDate
- TestAPICreateIssueAttachmentWithAutoDate
- TestAPICreateIssueAttachmentWithNoAutoDate
(cherry picked from commit 4926a5d7a28581003545256632213bf4136b193d)
Add an updated_at field to the API call for issue's comment creation
The update date is used as the comment creation date, and is applied to
the issue as the update creation date.
(cherry picked from commit 76c8faecdc6cba48ca4fe07d1a916d1f1a4b37b4)
Add an updated_at field to the API call for issue's comment edition
The update date is used as the comment update date, and is applied to
the issue as an update date.
(cherry picked from commit cf787ad7fdb8e6273fdc35d7b5cc164b400207e9)
Add an updated_at field to the API call for comment's attachment creation
The update date is applied to the comment, and is set as the asset
creation date.
(cherry picked from commit 1e4ff424d39db7a4256cd9abf9c58b8d3e1b5c14)
Checking Comment changes, with and without providing an updated_at date
Those unit tests are added:
- TestAPICreateCommentWithAutoDate
- TestAPICreateCommentWithNoAutoDate
- TestAPIEditCommentWithAutoDate
- TestAPIEditCommentWithNoAutoDate
- TestAPICreateCommentAttachmentWithAutoDate
- TestAPICreateCommentAttachmentWithNoAutoDate
(cherry picked from commit da932152f1deb3039a399516a51c8b6757059c91)
Pettier code to set the update time of comments
Now uses sess.AllCols().NoAutoToime().SetExpr("updated_unix", ...)
XORM is smart enough to compose one single SQL UPDATE which all
columns + updated_unix.
(cherry picked from commit 1f6a42808dd739c0c2e49e6b7ae2967f120f43c2)
Issue edition: Keep the max of the milestone and issue update dates.
When editing an issue via the API, an updated_at date can be provided.
If the EditIssue call changes the issue's milestone, the milestone's
update date is to be changed accordingly, but only with a greater
value.
This ensures that a milestone's update date is the max of all issue's
update dates.
(cherry picked from commit 8f22ea182e6b49e933dc6534040160dd739ff18a)
Rewrite the 'AutoDate' tests using subtests
Also add a test to check the permissions to set a date, and a test
to check update dates on milestones.
The tests related to 'AutoDate' are:
- TestAPIEditIssueAutoDate
- TestAPIAddIssueLabelsAutoDate
- TestAPIEditIssueMilestoneAutoDate
- TestAPICreateIssueAttachmentAutoDate
- TestAPICreateCommentAutoDate
- TestAPIEditCommentWithDate
- TestAPICreateCommentAttachmentAutoDate
(cherry picked from commit 961fd13c551b3e50040acb7c914a00ead92de63f)
(cherry picked from commit d52f4eea44692ee773010cb66a69a603663947d5)
(cherry picked from commit 3540ea2a43155ca8cf5ab1a4a246babfb829db16)
Conflicts:
services/issue/issue.go
https://codeberg.org/forgejo/forgejo/pulls/1415
(cherry picked from commit 56720ade008c09122d825959171aa5346d645987)
Conflicts:
routers/api/v1/repo/issue_label.go
https://codeberg.org/forgejo/forgejo/pulls/1462
(cherry picked from commit 47c78927d6c7e7a50298fa67efad1e73723a0981)
(cherry picked from commit 2030f3b965cde401976821083c3250b404954ecc)
(cherry picked from commit f02aeb76981cd688ceaf6613f142a8a725be1437)
Conflicts:
routers/api/v1/repo/issue_attachment.go
routers/api/v1/repo/issue_comment_attachment.go
https://codeberg.org/forgejo/forgejo/pulls/1575
(cherry picked from commit d072525b35e44faf7ff87143c0e52b8ba8a625c8)
(cherry picked from commit 8424d0ab3df75ac3ffa30f42d398e22995ada5e7)
(cherry picked from commit 5cc62caec788b54afd9da5b9193ce06ee8ec562b)
(cherry picked from commit d6300d5dcd01c7ddc65d8b0f326f9c19cb53b58e)
[FEAT] allow setting the update date on issues and comments (squash) apply the 'update_at' value to the cross-ref comments (#1676)
[this is a follow-up to PR #764]
When a comment of issue A referencing issue B is added with a forced 'updated_at' date, that date has to be applied to the comment created in issue B.
-----
Comment:
While trying my 'RoundUp migration script', I found that this case was forgotten in PR #764 - my apologies...
I'll try to write a functional test, base on models/issues/issue_xref_test.go
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1676
Co-authored-by: fluzz <fluzz@freedroid.org>
Co-committed-by: fluzz <fluzz@freedroid.org>
(cherry picked from commit ac4f727f63a2dd746dd84a31ebf7f70d5b5d7c52)
(cherry picked from commit 5110476ee9010ba8cdca0e0f37f765f8800e9fe1)
(cherry picked from commit 77ba6be1dab4f6f3678d79a394da56e6447ebbe1)
(cherry picked from commit 9c8337b5c442cfd72d97597c2089e776f42828b7)
(cherry picked from commit 1d689eb686f0f7df09c7861b3faf9d8683cb933b)
(cherry picked from commit 511c519c875a4c4e65c02ef0c4e3b941f4da4371)
(cherry picked from commit 2f0b4a8f610837d34844bb79cda1360ab23b6b1c)
(cherry picked from commit fdd4da111c449322901a0acf6d0857eac4716581)
[FEAT] allow setting the update date on issues and comments (squash) do not use token= query param
See https://codeberg.org/forgejo/forgejo/commit/33439b733a
(cherry picked from commit c5139a75b9e4af612a628171bd4f63a24860c272)
(cherry picked from commit c7b572c35d3e9e22017fd74045bcdc1109bd06df)
(cherry picked from commit aec7503ff6dd177980f3d9f367122ffc2fec8986)
(cherry picked from commit 87c65f2a490faeccb85088fa0981dd50f7199eb8)
(cherry picked from commit bd47ee33c20e53ae616a7e53d63c3b51809585fb)
(cherry picked from commit f3dbd90a747c14fb1b5b4271db6c10abbf86d586)
(cherry picked from commit 20b56692693e054bb3c04b4ef12b29b0715b4530)
(cherry picked from commit 1574643a6a9634e5b92c033a4bfb69062a86bd05)
Update semantic version according to specification
(cherry picked from commit 22510f41306f9c133a7e99b61f9c38dabfd4b810)
Mise à jour de 'Makefile'
(cherry picked from commit c3d85d8409f1bb18a45659a167cf1ffee057f3b6)
(cherry picked from commit 5ea23098513c068444226af41faf9be9c4c998e6)
(cherry picked from commit ec5217b9d1b94bb04e34ce8c27eecbdc6f3a247a)
(cherry picked from commit 14f08e364b2ad7e3176b45d3ec8da5f5605b4315)
(cherry picked from commit b4465c67b8737aed9fd79a43046aa3795a298e68)
[API] [SEMVER] replace number with version
(cherry picked from commit fba48e64977a75e77c9c6cf8e3f8a679a5e7b733)
(cherry picked from commit 532ec5d8782703b62d7d02312764e50637cd016e)
[API] [SEMVER] [v1.20] less is replaced by css
(cherry picked from commit 01ca3a4f4291cf4c62df42cbd12a00638f3cdc70)
(cherry picked from commit 1d928c3ab2e1fda6082e1400d89ea96d6605ebaa)
(cherry picked from commit a39dc804cd1da86444ed709455857f069475e7db)
Conflicts:
webpack.config.js
(cherry picked from commit adc68578b3eb41215338125edfca91804706f8a1)
(cherry picked from commit 9b8d98475fd7efcc15bf0d91b0af6ef3aff64508)
(cherry picked from commit 25161039745a63282257eded9616390241af8013)
(cherry picked from commit 18e6287963a0e1863cd08fd514a4e732a1904a68)
(cherry picked from commit e9694e67ab93ad74f7eae3152d88d95e8493e739)
(cherry picked from commit a9763edaf002c8009a2cca4115cb8b926f8cdc85)
(cherry picked from commit e2b550f4fba144f9637a212b56bfe30cac1adb3b)
(cherry picked from commit 2edac36701e8fa1ff67f87dccfa34cfc00ab66de)
[API] Forgejo API /api/forgejo/v1 (squash)
Update semver as v1.20 is entering release candidate mode
(cherry picked from commit 4995098ec3c6eee19a7ad7bc956b71c6e937c04c)
(cherry picked from commit 578ccfdd27d7a280050bdf61d497d07decf98f2f)
(cherry picked from commit 1bf6ac09520490f0a56b9b55d7836c2d8ea5d22c)
(cherry picked from commit 2fe16b2bfed62c0386d0bfe104f7dcc621d1c3be)
(cherry picked from commit 7cd9d027eec5a2b328d06a47f34545943560fe1b)
(cherry picked from commit eaed4be2ae88055a15dcc96564440c301a13ba8e)
(cherry picked from commit cc94f3115f844a0f16064e49e5eb719d33bc4441)
(cherry picked from commit d7a77e35ccfd2d0fc2ba98932296ab7354edd2db)
(cherry picked from commit cd8eb68ab7b3e2eaacf78d370c762f43cc19fd6a)
(cherry picked from commit 68487ac95f742837e7ff38df902834b6173cd9ab)
(cherry picked from commit 616dceb565456d6fac6f58b1c4de43e9d3254090)
(cherry picked from commit 545fe5975b47d2eab348a57b87c6fd4590f33442)
(cherry picked from commit c042cf8eda2dea805138bd64daa7fbe07865ed5a)
(cherry picked from commit ae5e5a7468aa66312055a26841f658574a9b0dd7)
(cherry picked from commit 8034ef5fa2648a127f8c84c572bec02a1ff6bb9f)
(cherry picked from commit aaf0293034468505449d33ab1483ae65b4175754)
(cherry picked from commit daafa8ce58e5e6077da585b13e5190856228a4a3)
(cherry picked from commit 7ca3681d3e2ed5ec1ae44364cba476d642e2b557)
(cherry picked from commit 39f72cba71ff3f9d2cbb05c88031b34933573a8c)
(cherry picked from commit 60a591713097384935ba0ac51a5cd4793f7544a8)
(cherry picked from commit 4853bd9e16bc8986ba8159349e93bc3093dc8ab9)
[API] Move forgejo api file (squash)
- Move the file to accommodate faa28b5a44
(cherry picked from commit bce89351d251bfa18c677b30bc7da80856d919fb)
(cherry picked from commit 11ae7f6e85395b287c6f4108c531aa1a81fd964c)
(cherry picked from commit 25e96cfcb28859406329090eb0c7990bea4e73eb)
(cherry picked from commit 6d8d19b39156a7f8b4db5022915590593df94f1f)
(cherry picked from commit 5afc5c454b7d70f95b83e6c3b4c9e2cb6e2d0ef5)
(cherry picked from commit 86d07b4c249211bdb77c0520f99f2c8e5d89b516)
(cherry picked from commit e54d869fdae44811faaa80f3757efbc93bf0bce4)
(cherry picked from commit ab31ef1bba3bc5188e0f3ce5e5fa33335877cf47)
(cherry picked from commit 511cbca2f3799646edf8eae00464b87f43ca280f)
(cherry picked from commit 333916fea874509063f9449f07d79e4cafbcf06f)
(cherry picked from commit 3802bcd7c9865b77151ef454c0bdc2ce32157a41)
(cherry picked from commit 5d0fa034f77388ed21735a22cf1a2a23562245c3)
(cherry picked from commit d15627aa0dfb4ffc2eb7ab0ce99b7c5b2bf06dcf)
(cherry picked from commit ba0b21b9305b6fecf23aeec213f1a95d96ce72fb)
(cherry picked from commit 39ade66aac7f8cccd980d1f435b92465a50be032)
- The watch/unwatch button and star/unstar get their own template
- The backend returns HTML instead of redirect
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Fixes#28660
Fixes an admin api bug related to `user.LoginSource`
Fixed `/user/emails` response not identical to GitHub api
This PR unifies the user update methods. The goal is to keep the logic
only at one place (having audit logs in mind). For example, do the
password checks only in one method not everywhere a password is updated.
After that PR is merged, the user creation should be next.
Follow #28654
The `comments` might be empty, so the templates shouldn't (and couldn't)
use it to render. When there is no comment, the UI should also be
updated to empty, so returning an empty body is good enough.
This change allows act_runner / actions_runner to use jwt tokens for
`ACTIONS_RUNTIME_TOKEN` that are compatible with
actions/upload-artifact@v4.
The official Artifact actions are now validating and extracting the jwt
claim scp to get the runid and jobid, the old artifact backend also
needs to accept the same token jwt.
---
Related to #28853
I'm not familar with the auth system, maybe you know how to improve this
I have tested
- the jwt token is a valid token for artifact uploading
- the jwt token can be parsed by actions/upload-artifact@v4 and passes
their scp claim validation
Next steps would be a new artifacts@v4 backend.
~~I'm linking the act_runner change soonish.~~
act_runner change to make the change effective and use jwt tokens
<https://gitea.com/gitea/act_runner/pulls/471>
In #28691, schedule plans will be deleted when a repo's actions unit is
disabled. But when the unit is enabled, the schedule plans won't be
created again.
This PR fixes the bug. The schedule plans will be created again when the
actions unit is re-enabled
- Closes https://github.com/go-gitea/gitea/issues/28880
This change introduces htmx with the hope we could use it to make Gitea
more reactive while keeping our "HTML rendered on the server" approach.
- Add `htmx.js` that imports `htmx.org` and initializes error toasts
- Place `hx-headers='{"x-csrf-token": "{{.CsrfToken}}"}'` on the
`<body>` tag so every request that htmx sends is authenticated
- Place `hx-swap="outerHTML"` on the `<body>` tag so the response of
each htmx request replaces the tag it targets (as opposed to its inner
content)
- Place `hx-push-url="false"` on the `<body>` tag so no changes to the
URL happen in `<form>` tags
- Add the `is-loading` class during request
### Error toasts in action
## Don't do a full page load when clicking the subscribe button
- Refactor the form around the subscribe button into its own template
- Use htmx to perform the form submission
- `hx-boost="true"` to prevent the default form submission behavior of a
full page load
- `hx-sync="this:replace"` to replace the current request (in case the
button is clicked again before the response is returned)
- `hx-target="this"` to replace the form tag with the new form tag
- Change the backend response to return a `<form>` tag instead of a
redirect to the issue page
### Before
### After
## Don't do a full page load when clicking the follow button
- Use htmx to perform the button request
- `hx-post="{{.ContextUser.HomeLink}}?action=follow"` to send a POST
request to follow the user
- `hx-target="#profile-avatar-card"` to target the card div for
replacement
- `hx-indicator="#profile-avatar-card"` to place the loading indicator
on the card
- Change the backend response to return a `<div>` tag (the card) instead
of a redirect to the user page
### Before
### After
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: 6543 <m.huber@kithara.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Renames it to `ENABLED` to be consistent with other settings and
deprecates it.
I believe this change is necessary because other setting groups such as
`attachment`, `cors`, `mailer`, etc. have an `ENABLED` setting, but
`oauth2` is the only one with an `ENABLE` setting, which could cause
confusion for users.
This is no longer a breaking change because `ENABLE` has been set as
deprecated and as an alias to `ENABLED`.
## Purpose
This is a refactor toward building an abstraction over managing git
repositories.
Afterwards, it does not matter anymore if they are stored on the local
disk or somewhere remote.
## What this PR changes
We used `git.OpenRepository` everywhere previously.
Now, we should split them into two distinct functions:
Firstly, there are temporary repositories which do not change:
```go
git.OpenRepository(ctx, diskPath)
```
Gitea managed repositories having a record in the database in the
`repository` table are moved into the new package `gitrepo`:
```go
gitrepo.OpenRepository(ctx, repo_model.Repo)
```
Why is `repo_model.Repository` the second parameter instead of file
path?
Because then we can easily adapt our repository storage strategy.
The repositories can be stored locally, however, they could just as well
be stored on a remote server.
## Further changes in other PRs
- A Git Command wrapper on package `gitrepo` could be created. i.e.
`NewCommand(ctx, repo_model.Repository, commands...)`. `git.RunOpts{Dir:
repo.RepoPath()}`, the directory should be empty before invoking this
method and it can be filled in the function only. #28940
- Remove the `RepoPath()`/`WikiPath()` functions to reduce the
possibility of mistakes.
---------
Co-authored-by: delvh <dev.lh@web.de>
The `ToUTF8*` functions were stripping BOM, while BOM is actually valid
in UTF8, so the stripping must be optional depending on use case. This
does:
- Add a options struct to all `ToUTF8*` functions, that by default will
strip BOM to preserve existing behaviour
- Remove `ToUTF8` function, it was dead code
- Rename `ToUTF8WithErr` to `ToUTF8`
- Preserve BOM in Monaco Editor
- Remove a unnecessary newline in the textarea value. Browsers did
ignore it, it seems but it's better not to rely on this behaviour.
Fixes: https://github.com/go-gitea/gitea/issues/28743
Related: https://github.com/go-gitea/gitea/issues/6716 which seems to
have once introduced a mechanism that strips and re-adds the BOM, but
from what I can tell, this mechanism was removed at some point after
that PR.
Currently, the `updateMirror` function which update the mirror interval
and enable prune properties is only executed by the `Edit` function. But
it is only triggered if `opts.MirrorInterval` is not null, even if
`opts.EnablePrune` is not null.
With this patch, it is now possible to update the enable_prune property
with a patch request without modifying the mirror_interval.
## Example request with httpie
### Currently:
**Does nothing**
```bash
http PATCH https://gitea.your-server/api/v1/repos/myOrg/myRepo "enable_prune:=false" -A bearer -a $gitea_token
```
**Updates both properties**
```bash
http PATCH https://gitea.your-server/api/v1/repos/myOrg/myRepo "enable_prune:=false" "mirror_interval=10m" -A bearer -a $gitea_token
```
### With the patch
**Updates enable_prune only**
```bash
http PATCH https://gitea.your-server/api/v1/repos/myOrg/myRepo "enable_prune:=false" -A bearer -a $gitea_token
```
- Use htmx to perform the button request
- `hx-headers='{"x-csrf-token": "{{.CsrfToken}}"}'` to authenticate (we
should probably learn to reuse this)
- `hx-post="{{.ContextUser.HomeLink}}?action=follow"` to send a POST
request to follow the user
- `hx-target="#profile-avatar-card"` to target the card div for
replacement
- `hx-swap="outerHTML"` to replace the card (as opposed to its inner
content) with the new card that shows the new follower count and button
color
- Change the backend response to return a `<div>` tag (the card) instead
of a redirect to the user page
# Before
# After
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
- Refactor the form around the subscribe button into its own template
- Use htmx to perform the form submission
- `hx-boost="true"` to prevent the default form submission behavior of a
full page load
- `hx-sync="this:replace"` to replace the current request (in case the
button is clicked again before the response is returned)
- `hx-target="this"` to replace the form tag with the new form tag
- `hx-push-url="false"` to disable a change to the URL
- `hx-swap="show:no-scroll"` to preserve the scroll position
- Change the backend response to return a `<form>` tag instead of a
redirect to the issue page
- Include `htmx.org` in javascript imports
This change introduces htmx with the hope we could use it to make Gitea
more reactive while keeping our "HTML rendered on the server" approach.
# Before
# After
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Fix `Uploaded artifacts should be overwritten`
https://github.com/go-gitea/gitea/issues/28549
When upload different content to uploaded artifact, it checks that
content size is not match in db record with previous artifact size, then
the new artifact is refused.
Now if it finds uploading content size is not matching db record when
receiving chunks, it updates db records to follow the latest size value.
Sometimes you need to work on a feature which depends on another (unmerged) feature.
In this case, you may create a PR based on that feature instead of the main branch.
Currently, such PRs will be closed without the possibility to reopen in case the parent feature is merged and its branch is deleted.
Automatic target branch change make life a lot easier in such cases.
Github and Bitbucket behave in such way.
Example:
$PR_1$: main <- feature1
$PR_2$: feature1 <- feature2
Currently, merging $PR_1$ and deleting its branch leads to $PR_2$ being closed without the possibility to reopen.
This is both annoying and loses the review history when you open a new PR.
With this change, $PR_2$ will change its target branch to main ($PR_2$: main <- feature2) after $PR_1$ has been merged and its branch has been deleted.
This behavior is enabled by default but can be disabled.
For security reasons, this target branch change will not be executed when merging PRs targeting another repo.
Fixes#27062Fixes#18408
---------
Co-authored-by: Denys Konovalov <kontakt@denyskon.de>
Co-authored-by: delvh <dev.lh@web.de>
