Attempt clarify the AppWorkPath in the documentation by using different
notation and adding a section to the start of the cheat sheet.
Fix#21523
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Related #20471
This PR adds global quota limits for the package registry. Settings for
individual users/orgs can be added in a seperate PR using the settings
table.
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This patch provide a mechanism to disable
[sitemap](https://github.com/go-gitea/gitea/pull/18407).
Signed-off-by: Xinyu Zhou <i@sourcehut.net>
Co-authored-by: 6543 <6543@obermui.de>
Only load SECRET_KEY and INTERNAL_TOKEN if they exist.
Never write the config file if the keys do not exist, which was only a fallback for Gitea upgraded from < 1.5
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR adds mathematical rendering with KaTeX.
The first step is to add a Goldmark extension that detects the latex
(and tex) mathematics delimiters.
The second step to make this extension only run if math support is
enabled.
The second step is to then add KaTeX CSS and JS to the head which will
load after the dom is rendered.
Fix#3445
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Adds a new option to only show relevant repo's on the explore page, for bigger Gitea instances like Codeberg this is a nice option to enable to make the explore page more populated with unique and "high" quality repo's. A note is shown that the results are filtered and have the possibility to see the unfiltered results.
Co-authored-by: vednoc <vednoc@protonmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: 6543 <6543@obermui.de>
This PR adds functionality to allow Gitea to sit behind an
HAProxy and HAProxy protocolled connections directly.
Fix#7508
Signed-off-by: Andrew Thornton <art27@cantab.net>
This adds support for getting the user's full name from the reverse
proxy in addition to username and email.
Tested locally with caddy serving as reverse proxy with Tailscale
authentication.
Signed-off-by: Will Norris <will@tailscale.com>
Signed-off-by: Will Norris <will@tailscale.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* increase default page sizes to 20
* adjust docs to reflect that the setting is used all over the place
* fix tests
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* `PROTOCOL`: can be smtp, smtps, smtp+startls, smtp+unix, sendmail, dummy
* `SMTP_ADDR`: domain for SMTP, or path to unix socket
* `SMTP_PORT`: port for SMTP; defaults to 25 for `smtp`, 465 for `smtps`, and 587 for `smtp+startls`
* `ENABLE_HELO`, `HELO_HOSTNAME`: reverse `DISABLE_HELO` to `ENABLE_HELO`; default to false + system hostname
* `FORCE_TRUST_SERVER_CERT`: replace the unclear `SKIP_VERIFY`
* `CLIENT_CERT_FILE`, `CLIENT_KEY_FILE`, `USE_CLIENT_CERT`: clarify client certificates here
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Add git.HOME_PATH
* add legacy file check
* Apply suggestions from code review
Co-authored-by: zeripath <art27@cantab.net>
* pass env GNUPGHOME to git command, move the existing .gitconfig to new home, make the fix for 1.17rc more clear.
* set git.HOME_PATH for docker images to default HOME
* Revert "set git.HOME_PATH for docker images to default HOME"
This reverts commit f120101ddc267cef74e4f4b92c783d5fc8e275a1.
* force Gitea to use a stable GNUPGHOME directory
* extra check to ensure only process dir or symlink for legacy files
* refactor variable name
* The legacy dir check (for 1.17-rc1) could be removed with 1.18 release, since users should have upgraded from 1.17-rc to 1.17-stable
* Update modules/git/git.go
Co-authored-by: Steven Kriegler <61625851+justusbunsi@users.noreply.github.com>
* remove initFixGitHome117rc
* Update git.go
* Update docs/content/doc/advanced/config-cheat-sheet.en-us.md
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Steven Kriegler <61625851+justusbunsi@users.noreply.github.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Unfortunately it appears that 2048 bit RSA keys can occasionally be created in such
a way that they appear to have 2047 bit length. This PR simply changes our defaults to
allow these.
Fix#20249
Signed-off-by: Andrew Thornton <art27@cantab.net>
- Completely remove U2F support from 1.18.0, 1.17.0 will be the last
release that U2F is somewhat supported. Users who used U2F would already
be warned about using U2F for a while now and should hopefully already
be migrated. But starting 1.18 definitely remove it.
* go.mod: add go-fed/{httpsig,activity/pub,activity/streams} dependency
go get github.com/go-fed/activity/streams@master
go get github.com/go-fed/activity/pub@master
go get github.com/go-fed/httpsig@master
* activitypub: implement /api/v1/activitypub/user/{username} (#14186)
Return informations regarding a Person (as defined in ActivityStreams
https://www.w3.org/TR/activitystreams-vocabulary/#dfn-person).
Refs: https://github.com/go-gitea/gitea/issues/14186
Signed-off-by: Loïc Dachary <loic@dachary.org>
* activitypub: add the public key to Person (#14186)
Refs: https://github.com/go-gitea/gitea/issues/14186
Signed-off-by: Loïc Dachary <loic@dachary.org>
* activitypub: go-fed conformant Clock instance
Signed-off-by: Loïc Dachary <loic@dachary.org>
* activitypub: signing http client
Signed-off-by: Loïc Dachary <loic@dachary.org>
* activitypub: implement the ReqSignature middleware
Signed-off-by: Loïc Dachary <loic@dachary.org>
* activitypub: hack_16834
Signed-off-by: Loïc Dachary <loic@dachary.org>
* Fix CI checks-backend errors with go mod tidy
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Change 2021 to 2022, properly format package imports
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Run make fmt and make generate-swagger
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Use Gitea JSON library, add assert for pkp
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Run make fmt again, fix err var redeclaration
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Remove LogSQL from ActivityPub person test
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Assert if json.Unmarshal succeeds
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Cleanup, handle invalid usernames for ActivityPub person GET request
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Rename hack_16834 to user_settings
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Use the httplib module instead of http for GET requests
* Clean up whitespace with make fmt
* Use time.RFC1123 and make the http.Client proxy-aware
* Check if digest algo is supported in setting module
* Clean up some variable declarations
* Remove unneeded copy
* Use system timezone instead of setting.DefaultUILocation
* Use named constant for httpsigExpirationTime
* Make pubKey IRI #main-key instead of /#main-key
* Move /#main-key to #main-key in tests
* Implemented Webfinger endpoint.
* Add visible check.
* Add user profile as alias.
* Add actor IRI and remote interaction URL to WebFinger response
* fmt
* Fix lint errors
* Use go-ap instead of go-fed
* Run go mod tidy to fix missing modules in go.mod and go.sum
* make fmt
* Convert remaining code to go-ap
* Clean up go.sum
* Fix JSON unmarshall error
* Fix CI errors by adding @context to Person() and making sure types match
* Correctly decode JSON in api_activitypub_person_test.go
* Force CI rerun
* Fix TestActivityPubPersonInbox segfault
* Fix lint error
* Use @mariusor's suggestions for idiomatic go-ap usage
* Correctly add inbox/outbox IRIs to person
* Code cleanup
* Remove another LogSQL from ActivityPub person test
* Move httpsig algos slice to an init() function
* Add actor IRI and remote interaction URL to WebFinger response
* Update TestWebFinger to check for ActivityPub IRI in aliases
* make fmt
* Force CI rerun
* WebFinger: Add CORS header and fix Href -> Template for remote interactions
The CORS header is needed due to https://datatracker.ietf.org/doc/html/rfc7033#section-5 and fixes some Peertube <-> Gitea federation issues
* make lint-backend
* Make sure Person endpoint has Content-Type application/activity+json and includes PreferredUsername, URL, and Icon
Setting the correct Content-Type is essential for federating with Mastodon
* Use UTC instead of GMT
* Rename pkey to pubKey
* Make sure HTTP request Date in GMT
* make fmt
* dont drop err
* Make sure API responses always refer to username in original case
Copied from what I wrote on #19133 discussion: Handling username case is a very tricky issue and I've already encountered a Mastodon <-> Gitea federation bug due to Gitea considering Ta180m and ta180m to be the same user while Mastodon thinks they are two different users. I think the best way forward is for Gitea to only use the original case version of the username for federation so other AP software don't get confused.
* Move httpsig algs constant slice to modules/setting/federation.go
* Add new federation settings to app.example.ini and config-cheat-sheet
* Return if marshalling error
* Make sure Person IRIs are generated correctly
This commit ensures that if the setting.AppURL is something like "http://127.0.0.1:42567" (like in the integration tests), a trailing slash will be added after that URL.
* If httpsig verification fails, fix Host header and try again
This fixes a very rare bug when Gitea and another AP server (confirmed to happen with Mastodon) are running on the same machine, Gitea fails to verify incoming HTTP signatures. This is because the other AP server creates the sig with the public Gitea domain as the Host. However, when Gitea receives the request, the Host header is instead localhost, so the signature verification fails. Manually changing the host header to the correct value and trying the veification again fixes the bug.
* Revert "If httpsig verification fails, fix Host header and try again"
This reverts commit f53e46c721a037c55facb9200106a6b491bf834c.
The bug was actually caused by nginx messing up the Host header when reverse-proxying since I didn't have the line `proxy_set_header Host $host;` in my nginx config for Gitea.
* Go back to using ap.IRI to generate inbox and outbox IRIs
* use const for key values
* Update routers/web/webfinger.go
* Use ctx.JSON in Person response to make code cleaner
* Revert "Use ctx.JSON in Person response to make code cleaner"
This doesn't work because the ctx.JSON() function already sends the response out and it's too late to edit the headers.
This reverts commit 95aad988975be3393c76094864ed6ba962157e0c.
* Use activitypub.ActivityStreamsContentType for Person response Content Type
* Limit maximum ActivityPub request and response sizes to a configurable setting
* Move setting key constants to models/user/setting_keys.go
* Fix failing ActivityPubPerson integration test by checking the correct field for username
* Add a warning about changing settings that can break federation
* Add better comments
* Don't multiply Federation.MaxSize by 1<<20 twice
* Add more better comments
* Fix failing ActivityPubMissingPerson test
We now use ctx.ContextUser so the message printed out when a user does not exist is slightly different
* make generate-swagger
For some reason I didn't realize that /templates/swagger/v1_json.tmpl was machine-generated by make generate-swagger... I've been editing it by hand for three months! 🤦
* Move getting the RFC 2616 time to a separate function
* More code cleanup
* Update go-ap to fix empty liked collection and removed unneeded HTTP headers
* go mod tidy
* Add ed25519 to httpsig algorithms
* Use go-ap/jsonld to add @context and marshal JSON
* Change Gitea user agent from the default to Gitea/Version
* Use ctx.ServerError and remove all remote interaction code from webfinger.go
* Allow render HTML with css/js external links
* Fix bug because of filename escape chars
* Fix lint
* Update docs about new configuration item
* Fix bug of render HTML in sub directory
* Add CSP head for displaying iframe in rendering file
* Fix test
* Apply suggestions from code review
Co-authored-by: delvh <dev.lh@web.de>
* Some improvements
* some improvement
* revert change in SanitizerDisabled of external renderer
* Add sandbox for iframe and support allow-scripts and allow-same-origin
* refactor
* fix
* fix lint
* fine tune
* use single option RENDER_CONTENT_MODE, use sandbox=allow-scripts
* fine tune CSP
* Apply suggestions from code review
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* docs: update the ROOT documentation and error messages
* The documentation now reflects what happens in the
setting/repository.go::newRepository function:
filepath.Join(AppWorkPath, RepoRootPath) was missing.
* The error message displayed when RepoRootPath is not found now
displays the value of RepoRootPath. Given the complexity of the
construction of this value, only referring to it in the abstract
is likely to be misleading to the Gitea admin trying to interpret
the message.
Co-authored-by: delvh <dev.lh@web.de>
The issue was that only the actual title was converted to uppercase, but
not the prefix as specified in `WORK_IN_PROGRESS_PREFIXES`. As a result,
the following did not work:
WORK_IN_PROGRESS_PREFIXES=Draft:,[Draft],WIP:,[WIP]
One possible workaround was:
WORK_IN_PROGRESS_PREFIXES=DRAFT:,[DRAFT],WIP:,[WIP]
Then indeed one could use `Draft` (as well as `DRAFT`) in the title.
However, the link `Start the title with DRAFT: to prevent the pull request
from being merged accidentally.` showed the suggestion in uppercase; so
it is not possible to show it as `Draft`. This PR fixes it, and allows
to use `Draft` in `WORK_IN_PROGRESS_PREFIXES`.
Fixes#19779.
Co-authored-by: zeripath <art27@cantab.net>
Remove two unmaintained vendor packages `i18n` and `paginater`. Changes:
* Rewrite `i18n` package with a more clear fallback mechanism. Fix an unstable `Tr` behavior, add more tests.
* Refactor the legacy `Paginater` to `Paginator`, test cases are kept unchanged.
Trivial enhancement (no breaking for end users):
* Use the first locale in LANGS setting option as the default, add a log to prevent from surprising users.
Change all cron tasks to make them no notice on success default. Instead if a user
wants notices on success they need to add NOTICE_ON_SUCCESS=true instead.
## ⚠️ BREAKING ⚠️
This changes the cron config so that notices on success are no longer set by default
and breaks NO_SUCCESS_NOTICE settings. Instead users who want notices on success
must set NOTICE_ON_SUCCESS=true instead.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update custom/conf/app.example.ini
Co-authored-by: Norwin <noerw@users.noreply.github.com>
Co-authored-by: Norwin <noerw@users.noreply.github.com>
Even with #17688 email addresses that contain an initial `-` may still be present in the db and it may in future still be possible to imagine a situation whereby initial `-` are repermitted.
This PR simply updates the documentation to warn users to set their SENDMAIL_ARGS with a terminal `--` to prevent this possibility email addresses being interpreted as options.
Signed-off-by: Andrew Thornton <art27@cantab.net>
The service worker causes a lot of issues with JS errors after instance
upgrades while not bringing any real performance gain over regular HTTP
caching.
Disable it by default for this reason. Maybe later we can remove it
completely, as I simply see no benefit in having it.
- Use a better and more curated list of Ciphers and KeyExchanges, these roughly follows OpenSSH's default.
- Remove some cryptography values which were deprecated.
* Switch to non-deprecation setting
(Avoid by-default: "Deprecated fallback `[server]` `LFS_CONTENT_PATH` present. Use `[lfs]` `PATH` instead. This fallback will be removed in v1.18.0")
* Update all references
Make router logger more friendly, show the related function name/file/line.
[BREAKING]
This PR substantially changes the logging format of the router logger. If you use this logging for monitoring e.g. fail2ban you will need to update this to match the new format.
Migrate from U2F to Webauthn
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
It appears that several versions of sendmail require that the mail is sent to them with
LF line endings instead of CRLF endings - which of course they will then convert back
to CRLF line endings to comply with the SMTP standard.
This PR adds another setting SENDMAIL_CONVERT_CRLF which will pass the message writer
through a filter. This will filter out and convert CRLFs to LFs before writing them
out to sendmail.
Fix#18024
Signed-off-by: Andrew Thornton <art27@cantab.net>
Save a bit of bandwidth by only requesting 3-times the rendered avatar
size. Factor 4 is only really beneficial on a handful of mobile phones
and I don't think they are the primary device we design for.
Configurability contributed by zeripath.
Fixes: https://github.com/go-gitea/gitea/pull/17422
Fixes: https://github.com/go-gitea/gitea/issues/16287
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR adds another option to app.ini make co-committed-by and co-authored-by trailers
optional on a per server basis.
Fix#17194
Signed-off-by: Andrew Thornton <art27@cantab.net>
Use hostmacher to replace matchlist.
And we introduce a better DialContext to do a full host/IP check, otherwise the attackers can still bypass the allow/block list by a 302 redirection.
* Add settings to allow different SMTP envelope from address
Sometimes it may be advisable to hide or alias the from address on an SMTP mail
envelope. This PR adds two new options to the mailer to allow setting of an overriding
from address.
Fix#17477
Signed-off-by: Andrew Thornton <art27@cantab.net>
Convert the old mirror syncing queue to the more modern queue format.
Fix a bug in the from the repo-archive queue PR - the assumption was made that uniqueness could be enforced with by checking equality in a map in channel unique queues - however this only works for primitive types - which was the initial intention but is an imperfect. This is fixed by marshalling the data and placing the martialled data in the unique map instead.
The documentation is also updated to add information about the deprecated configuration values.
Signed-off-by: Andrew Thornton <art27@cantab.net>
core.protectNTFS protects NTFS from files which may be difficult to remove or interact
with using the win32 api, however, it also appears to prevent such files from
being entered into the git indexes - fundamentally causing breakages with PRs that
affect these files. However, deliberately setting this to false may cause security
issues due to the remain sparse checkout of files in the merge pipeline.
The only sensible option therefore is to provide an optional setting which admins
could set which would forcibly switch this off if they are affected by this issue.
Fix#17092
Signed-off-by: Andrew Thornton <art27@cantab.net>
Nodeinfo is a way to expose certain metadata about a server for use of discovery regarding functionality of its federation capabilities.
Two endpoints are required:
1. `/.well-known/nodeinfo` which informs client where it can find the location of the location of its metadata (including which version of the schema is used)
2. the endpoint which exposes the metadata in json format according to schema.
Notes:
* `openRegistrations` is a required field, but I propose to set to false as default in case someone writes a crawler to discover "open" gitea instances
* to limit data leakage I also propose to not include the `usage` field (note it is required so it should be included, but left as empty).
More info:
https://github.com/jhass/nodeinfohttps://github.com/jhass/nodeinfo/tree/main/schemas/2.1http://nodeinfo.diaspora.software/protocol.html
Add a new default theme `auto`, which will automatically switch between
`gitea` (light) and `arc-green` (dark) themes depending on the user's
operating system settings.
Closes: #8183
Rename`[repository]` `DISABLE_MIRRORS` to `[mirror]` `DISABLE_NEW_PULL` and add `ENABLED` and `DISABLE_NEW_PUSH` with the below meanings:
- `ENABLED`: **true**: Enables the mirror functionality. Set to **false** to disable all mirrors.
- `DISABLE_NEW_PULL`: **false**: Disable the creation of **new** mirrors. Pre-existing mirrors remain valid.
- `DISABLE_NEW_PUSH`: **false**: Disable the creation of **new** push mirrors. Pre-existing mirrors remain valid.
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: delvh <dev.lh@web.de>
* Add proxy settings and support for migration and webhook
* Fix default value
* Add newline for example ini
* Add lfs proxy support
* Fix lint
* Follow @zeripath's review
* Fix git clone
* Fix test
* missgin http requests for proxy
* use empty
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: zeripath <art27@cantab.net>
One of the issues holding back performance of the API is the problem of hashing.
Whilst banning BASIC authentication with passwords will help, the API Token scheme
still requires a PBKDF2 hash - which means that heavy API use (using Tokens) can
still cause enormous numbers of hash computations.
A slight solution to this whilst we consider moving to using JWT based tokens and/or
a session orientated solution is to simply cache the successful tokens. This has some
security issues but this should be balanced by the security issues of load from
hashing.
Related #14668
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Allow setting X-FRAME-OPTIONS
This PR provides a mechanism to set the X-FRAME-OPTIONS header.
Fix#7951
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update docs/content/doc/advanced/config-cheat-sheet.en-us.md
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
* Make Mermaid.js limit configurable
Add `MERMAID_MAX_SOURCE_CHARACTERS` to `[markup]` settings
to make the maximum size of a mermaid render configurable.
Fix#16513
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fixup! Make Mermaid.js limit configurable
* Update custom/conf/app.example.ini
Co-authored-by: silverwind <me@silverwind.io>
* Update docs/content/doc/advanced/config-cheat-sheet.en-us.md
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* add configuration option to restrict users by default
* default IsRestricted permission only set on sign up
setting this in the model messes with other workflows (e.g. syncing LDAP users) where the IsRestricted permission needs to be explicitly set and not overridden by a config value
* fix formatting
* Apply suggestions from code review
* ensure newly created user is set to restricted
* ensure imports are in the correct order
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
The current default memory cache implementation is unbounded in size and number of
objects cached. This is hardly ideal.
This PR proposes creating a TwoQueue LRU cache as the underlying cache for Gitea.
The cache is limited by the number of objects stored in the cache (rather than size)
for simplicity. The default number of objects is 50000 - which is perhaps too small
as most of our objects cached are going to be much less than 1kB.
It may be worth considering using a different LRU implementation that actively limits
sizes or avoids GC - however, this is just a beginning implementation.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Following the merging of https://github.com/go-git/go-git/pull/330 we
can now add a setting to avoid go-git reading and caching large objects.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Now that #16069 is merged, some sites may wish to enforce that users are all public, limited or private, and/or disallow users from becoming private.
This PR adds functionality and settings to constrain a user's ability to change their visibility.
Co-authored-by: zeripath <art27@cantab.net>
You can limit or hide organisations. This pull make it also posible for users
- new strings to translte
- add checkbox to user profile form
- add checkbox to admin user.edit form
- filter explore page user search
- filter api admin and public user searches
- allow admins view "hidden" users
- add app option DEFAULT_USER_VISIBILITY
- rewrite many files to use Visibility field
- check for teams intersection
- fix context output
- right fake 404 if not visible
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Andrew Thornton <art27@cantab.net>
* Added support for gopher URLs.
* Add setting and make this user settable instead
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
There are a couple of settings in `[indexer]` relating to the `issue_indexer` queue
which override settings in unpredictable ways. This PR adjusts this hierarchy and makes
explicit that these settings are deprecated.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Set self-adjusting deadline for connection writing
In #16055 it appears that the simple 5s deadline doesn't work for large
file writes. Now we can't - or at least shouldn't just set no deadline
as go will happily let these connections block indefinitely. However,
what seems reasonable is to set some minimum rate we expect for writing.
This PR suggests the following algorithm:
* Every write has a minimum timeout of 5s (adjustable at compile time.)
* If there has been a previous write - then consider its previous
deadline, add half of the minimum timeout + 2s per kb about to written.
* If that new deadline is after the minimum timeout use that.
Fix#16055
* Linearly increase timeout
* Make PerWriteTimeout, PerWritePerKbTimeouts configurable
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* add a new internal hook to save ssh log
as title, when a ssh error ocure like #15785.
only when switch ``RUN_MODE`` to dev can we
found which error is ocure. But this way is
not a good idea for production envirment.
this changes try save ssh error mesage to the
log file like other log by a new internal hook.
I think it's usefull for find error message
in production envirment. Thanks.
Signed-off-by: a1012112796 <1012112796@qq.com>
* rename and fix nit
* Update modules/private/hook.go
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
This PR is an alternative to #15559.
Instead of deleting the app.example.ini - just comment out most of the
thing. This makes it clear what needs to be set and what is completely
optional - and keeps the documentation.
The app.example.ini is moved around to move the most important settings
higher in the document.
Close#15559
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Refactored handleOAuth2SignIn in routers/user/auth.go
The function handleOAuth2SignIn was called twice but some code path could only
be reached by one of the invocations. Moved the unnecessary code path out of
handleOAuth2SignIn.
* Refactored user creation
There was common code to create a user and display the correct error message.
And after the creation the only user should be an admin and if enabled a
confirmation email should be sent. This common code is now abstracted into
two functions and a helper function to call both.
* Added auto-register for OAuth2 users
If enabled new OAuth2 users will be registered with their OAuth2 details.
The UserID, Name and Email fields from the gothUser are used.
Therefore the OpenID Connect provider needs additional scopes to return
the coresponding claims.
* Added error for missing fields in OAuth2 response
* Linking and auto linking on oauth2 registration
* Set default username source to nickname
* Add automatic oauth2 scopes for github and google
* Add hint to change the openid connect scopes if fields are missing
* Extend info about auto linking security risk
Co-authored-by: Viktor Kuzmin <kvaster@gmail.com>
Signed-off-by: Martin Michaelis <code@mgjm.de>
Implements request #14320 The rendering of CSV files does match the diff style.
* Moved CSV logic into base package.
* Added method to create a tabular diff.
* Added CSV compare context.
* Added CSV diff template.
* Use new table style in CSV markup.
* Added file size limit for CSV rendering.
* Display CSV parser errors in diff.
* Lazy read single file.
* Lazy read rows for full diff.
* Added unit tests for various CSV changes.
* Add reverse proxy configuration support for remote IP address validation
* Trust all IP addresses in containerized environments by default
* Use single option to specify networks and proxy IP addresses. By default trust all loopback IPs
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Make SSH server host key path configurable
* make it possible to have multiple keys
* Make gitea.rsa the default key
* Add some more logging
Signed-off-by: Andrew Thornton <art27@cantab.net>
Add SameSite setting for cookies and rationalise the cookie setting code. Switches SameSite to Lax by default.
There is a possible future extension of differentiating which cookies could be set at Strict by default but that is for a future PR.
Fix#5583
Signed-off-by: Andrew Thornton <art27@cantab.net>
Gitea allows to whitelist email domains so that only email addresses from certain domains are allowed to register an account, but does not currently allows to do the opposite: blacklisting email domains so that addresses from certain domains are *forbidden* to register an account.
The idea has been briefly mentioned in the discussion about issue #6350, but never implemented. This PR does that.
The rationale is that, in my experience of running a Gitea instance, *a single email domain* is responsible for *most* of the spam accounts, and for *all* of the spam accounts that manage to get past the email confirmation step. So on top of the other spam mitigation measures already available (email confirmation, CAPTCHA, etc.), having the option to block a particularly annoying domain would be helpful.
close#13628
* Added option to disable web hooks
This mod introduces DISABLE_WEB_HOOKS parameter in [security] section
of app.ini (by default set to false). If set to true it disables web
hooks feature. Any existing undelivered web hook tasks will be cancelled.
Any existing web hook definitions will be left untouched in db but
its delivery tasks will be ignored.
Author-Change-Id: IB#1105130
* Webhook spelling fixed
Webhook spelling fixed.
Fixes: 07df6614dc84cdd2e9f39c57577fa1062bd70012
Related: https://github.com/go-gitea/gitea/pull/13176#pullrequestreview-510868421
Author-Change-Id: IB#1105174
* Parameter description fixed
Parameter description fixed.
Fixes: 07df6614dc84cdd2e9f39c57577fa1062bd70012
Related: https://github.com/go-gitea/gitea/pull/13176#pullrequestreview-514086107
Author-Change-Id: IB#1105174
Close **Prune hook_task Table (#10741)**
Added a cron job to delete webhook deliveries in the hook_task table. It can be turned on/off and the schedule controlled globally via app.ini. The data can be deleted by either the age of the delivery which is the default or by deleting the all but the most recent deliveries _per webhook_.
Note: I had previously submitted pr #11416 but I closed it when I realized that I had deleted per repository instead of per webhook. Also, I decided allowing the settings to be overridden via the ui was overkill. Also this version allows the deletion by age which is probably what most people would want.
* refactor models.DeleteComment and delete related reactions too
* use deleteComment for UserDeleteWithCommentsMaxDays in DeleteUser
* nits
* Use time.Duration as other time settings have
* docs
* Resolve Fixme & fix potential deadlock
* Disabled by Default
* Update Config Value Description
* switch args
* Update models/issue_comment.go
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: zeripath <art27@cantab.net>
* Add pager to the branches page
* override pageSize if bigger than max
* Make branches commit range configurable
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: silverwind <me@silverwind.io>
* Implement ghost comment mitigation
Adds a config option USER_DELETE_WITH_COMMENTS_MAX_DAYS to the [service] section. See https://codeberg.org/Codeberg/Discussion/issues/24 for the underlying issue.
* cleanup
* use setting module correctly
* add to docs
Co-authored-by: Moritz Marquardt <git@momar.de>
* Change to display SVG files as images
* Remove unsafe styles from SVG CSP
* Add integration test to test SVG headers
* Add config setting to disable SVG rendering
* Add test for img tag when loading SVG image
* Remove the Raw view button for svg files since we don't fully support this
* Fix copyright year
* Rename and move config setting
* Add setting to cheat sheet in docs
* Fix so that comment matches cheat sheet
* Add allowing styles in CSP based on pull request feedback
* Re-enable raw button since we show SVG styles now
* Change so that SVG files are editable
* Add UI to toggle between source and rendered image for SVGs
* Change to show blame button for SVG images
* Fix to update ctx data
* Add test for DetectContentType when file is longer than sniffLen
Co-authored-by: Jonathan Tran <jon@allspice.io>
Co-authored-by: Kyle D <kdumontnu@gmail.com>
* Added option to disable migrations
This patch introduces DISABLE_MIGRATIONS parameter in [repository]
section of app.ini (by default set to false). If set to true
it blocks access to repository migration feature.
This mod hides also local repo import option in user editor if
local repo importing or migrations is disabled.
* Alter Example config
DISABLE_MIGRATIONS set to false in example config to
match its default value.
* HTTP error 403 instead of 500 on denied access to migration
* Parameter DISABLE_MIGRATIONS exposed via API
Fixes: 04b04cf854bcb3ed7659442bcf79822bdebe29e9
Author-Change-Id: IB#1105130
* Add register manual confirm settings option
The new settings option is used when manually approving new
registrations.
* Enable manual confirmation of new registered user
When manual registration confirmation is desired (by default `false`)
create new user in the database that is *not active*. The user must then
be activated manually.
This change speeds up the process of adding new confirmed users for
Gitea instances without external auth mechanism. (Currently the option
is to manually create new user by admin.)
* Update docs/content/doc/advanced/config-cheat-sheet.zh-cn.md
Co-authored-by: a1012112796 <1012112796@qq.com>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: a1012112796 <1012112796@qq.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Store repository data in data path if not previously set
* update docs
* Update docs/content/doc/advanced/config-cheat-sheet.en-us.md
Co-authored-by: silverwind <me@silverwind.io>
* update docs
Co-authored-by: silverwind <me@silverwind.io>
I think it's a bad default to have "dev" as the default run mode which
enables debugging and now also disables HTTP caching. It's better to
just default to a value suitable for general deployments.
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* add black list and white list support for migrating repositories
* fix fmt
* fix lint
* fix vendor
* fix modules.txt
* clean diff
* specify log message
* use blocklist/allowlist
* allways use lowercase to match url
* Apply allow/block
* Settings: use existing "migrations" section
* convert domains lower case
* dont store unused value
* Block private addresses for migration by default
* fix lint
* use proposed-upstream func to detect private IP addr
* a nit
* add own error for blocked migration, add tests, imprufe api
* fix test
* fix-if-localhost-is-ipv4
* rename error & error message
* rename setting options
* Apply suggestions from code review
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
This enabled HTTP time-based cache for storage assets, primarily
avatars. I have not observed If-Modified-Since from browsers during
tests but I guess it's good to support regardless.
It introduces a new generic httpcache module that can handle both
time-based and etag-based caching.
Additionally, manifest.json and robots.txt are now also cachable.
* Clarify app.example.ini documentation
Hard to understand if cron i needed to activate all other cron.
* Added missing "Extended cron tasks" to config-cheat-sheet.en-us.md
cron default is false - setting it true activates all cron. Changed the documentation accordingly
* Fixed spelling
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Add ssh certificate support
* Add ssh certificate support to builtin ssh
* Write trusted-user-ca-keys.pem based on configuration
* Update app.example.ini
* Update templates/user/settings/keys_principal.tmpl
Co-authored-by: silverwind <me@silverwind.io>
* Remove unused locale string
* Update options/locale/locale_en-US.ini
Co-authored-by: silverwind <me@silverwind.io>
* Update options/locale/locale_en-US.ini
Co-authored-by: silverwind <me@silverwind.io>
* Update models/ssh_key.go
Co-authored-by: silverwind <me@silverwind.io>
* Add missing creation of SSH.Rootpath
* Update cheatsheet, example and locale strings
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
* Optimizations based on feedback
* Validate CA keys for external sshd
* Add filename option and change default filename
Add a SSH_TRUSTED_USER_CA_KEYS_FILENAME option which default is
RUN_USER/.ssh/gitea-trusted-user-ca-keys.pem
Do not write a file when SSH_TRUSTED_USER_CA_KEYS is empty.
Add some more documentation.
* Remove unneeded principalkey functions
* Add blank line
* Apply suggestions from code review
Co-authored-by: zeripath <art27@cantab.net>
* Add SSH_AUTHORIZED_PRINCIPALS_ALLOW option
This adds a SSH_AUTHORIZED_PRINCIPALS_ALLOW which is default
email,username this means that users only can add the principals
that match their email or username.
To allow anything the admin need to set the option anything.
This allows for a safe default in gitea which protects against malicious
users using other user's prinicipals. (before that user could set it).
This commit also has some small other fixes from the last code review.
* Rewrite principal keys file on user deletion
* Use correct rewrite method
* Set correct AuthorizedPrincipalsBackup default setting
* Rewrite principalsfile when adding principals
* Add update authorized_principals option to admin dashboard
* Handle non-primary emails
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add the command actually to the dashboard template
* Update models/ssh_key.go
Co-authored-by: silverwind <me@silverwind.io>
* By default do not show principal options unless there are CA keys set or they are explicitly set
Signed-off-by: Andrew Thornton <art27@cantab.net>
* allow settings when enabled
* Fix typos in TrustedUserCAKeys path
* Allow every CASignatureAlgorithms algorithm
As this depends on the content of TrustedUserCAKeys we should allow all
signature algorithms as admins can choose the specific algorithm on their
signing CA
* Update models/ssh_key.go
Co-authored-by: Lauris BH <lauris@nix.lv>
* Fix linting issue
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Disable DSA ssh keys by default
OpenSSH has disabled DSA keys since version 7.0
As the docker runs openssh > v7.0 we should just disable
DSA keys by default.
Refers to #11417
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Just disable DSA keys by default
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Appears we need to set the minimum key sizes too
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Appears we need to set the minimum key sizes too
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove DSA type
* Fix Tests
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Extend git hook warning in the UI.
Git hooks are a dangerous feature, administrators should be warned before giving
the git hook privilege to users.
* Disable Git hooks by default and add warning.
Git hooks are a dangerous features (see warning text) that should only
be enabled if the administrator was informed about the risk involved.
Co-authored-by: Niklas Goerke <goerke@fzi.de>
* Allow common redis and leveldb connections
Prevents multiple reopening of redis and leveldb connections to the same
place by sharing connections.
Further allows for more configurable redis connection type using the
redisURI and a leveldbURI scheme.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add unit-test
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @lunny
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add test
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update modules/cache/cache_redis.go
* Update modules/queue/queue_disk.go
* Update modules/cache/cache_redis.go
* Update modules/cache/cache_redis.go
* Update modules/queue/unique_queue_disk.go
* Update modules/queue/queue_disk.go
* Update modules/queue/unique_queue_disk.go
* Update modules/session/redis.go
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Don't automatically delete repository files if they are present
Prior to this PR Gitea would delete any repository files if they are
present during creation or migration. This can in certain circumstances
lead to data-loss and is slightly unpleasant.
This PR provides a mechanism for Gitea to adopt repositories on creation
and otherwise requires an explicit flag for deletion.
PushCreate is slightly different - the create will cause adoption if
that is allowed otherwise it will delete the data if that is allowed.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix tests and migrate overwrite
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @lunny
Only offer to adopt or overwrite if the user can do that.
Allow the site administrator to adopt or overwrite in all
circumstances
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Use setting.Repository.DefaultBranch for the default branch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Always set setting.Repository.DefaultBranch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* update templates
Signed-off-by: Andrew Thornton <art27@cantab.net>
* ensure repo closed
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Rewrite of adoption as per @6543 and @lunny
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
* update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* missing not
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add modals and flash reporting
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Make the unadopted page searchable
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add API
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Handle empty and non-master branched repositories
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove commented out code
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Add configurable Trust Models
Gitea's default signature verification model differs from GitHub. GitHub
uses signatures to verify that the committer is who they say they are -
meaning that when GitHub makes a signed commit it must be the committer.
The GitHub model prevents re-publishing of commits after revocation of a
key and prevents re-signing of other people's commits to create a
completely trusted repository signed by one key or a set of trusted
keys.
The default behaviour of Gitea in contrast is to always display the
avatar and information related to a signature. This allows signatures to
be decoupled from the committer. That being said, allowing arbitary
users to present other peoples commits as theirs is not necessarily
desired therefore we have a trust model whereby signatures from
collaborators are marked trusted, signatures matching the commit line
are marked untrusted and signatures that match a user in the db but not
the committer line are marked unmatched.
The problem with this model is that this conflicts with Github therefore
we need to provide an option to allow users to choose the Github model
should they wish to.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Adjust locale strings
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @6543
Co-authored-by: 6543 <6543@obermui.de>
* Update models/gpg_key.go
* Add migration for repository
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Restrict TLS connections to 1.2 minimum
* Set Argon2 as the default KDF
* Fix user.yml
* Remove TLS minversion changes
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add migration as per @techknowlogick
Signed-off-by: Andrew Thornton <art27@cantab.net>
* set the password algo in the fixtures
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove the v148 migration - it needs recreate table to change the defaults
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Nadim Kobeissi <nadim@symbolic.software>
* Support elastic search for code search
* Finished elastic search implementation and add some tests
* Enable test on drone and added docs
* Add new fields to elastic search
* Fix bug
* remove unused changes
* Use indexer alias to keep the gitea indexer version
* Improve codes
* Some code improvements
* The real indexer name changed to xxx.v1
Co-authored-by: zeripath <art27@cantab.net>
* Update JWT docs in example config
align with way we have `LFS_JWT_SECRET` in config
Fix#12590
* Update custom/conf/app.example.ini
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
* Disable password complexity check default
These features enourange bad passwords/are annoying for people using better password methods, and at minimum we shouldn't force that as a default for obvious reasons. Disable any default check to avoid regular complaints.
* fix copy paste format
* Add a storage layer for attachments
* Fix some bug
* fix test
* Fix copyright head and lint
* Fix bug
* Add setting for minio and flags for migrate-storage
* Add documents
* fix lint
* Add test for minio store type on attachments
* fix test
* fix test
* Apply suggestions from code review
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Add warning when storage migrated successfully
* Fix drone
* fix test
* rebase
* Fix test
* display the error on console
* Move minio test to amd64 since minio docker don't support arm64
* refactor the codes
* add trace
* Fix test
* remove log on xorm
* Fi download bug
* Add a storage layer for attachments
* Add setting for minio and flags for migrate-storage
* fix lint
* Add test for minio store type on attachments
* Apply suggestions from code review
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Fix drone
* fix test
* Fix test
* display the error on console
* Move minio test to amd64 since minio docker don't support arm64
* refactor the codes
* add trace
* Fix test
* Add URL function to serve attachments directly from S3/Minio
* Add ability to enable/disable redirection in attachment configuration
* Fix typo
* Add a storage layer for attachments
* Add setting for minio and flags for migrate-storage
* fix lint
* Add test for minio store type on attachments
* Apply suggestions from code review
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Fix drone
* fix test
* Fix test
* display the error on console
* Move minio test to amd64 since minio docker don't support arm64
* don't change unrelated files
* Fix lint
* Fix build
* update go.mod and go.sum
* Use github.com/minio/minio-go/v6
* Remove unused function
* Upgrade minio to v7 and some other improvements
* fix lint
* Fix go mod
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: Tyler <tystuyfzand@gmail.com>
* Clarify documentation of SKIP_VERIFY
The documentation clearly documents the empty value as the default,
however at least one user reported this as being unclear. Mark values
explicitly so it is clear what values it can take. This clarifies that
an empty value in fact leaves certificate verification enabled, whereas
it has to be explicitly set to true to disable certificate verification.
Resolves: #12117
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* Update docs/content/doc/advanced/config-cheat-sheet.en-us.md
Co-authored-by: mrsdizzie <info@mrsdizzie.com>
* Update custom/conf/app.example.ini
Co-authored-by: mrsdizzie <info@mrsdizzie.com>
* Update custom/conf/app.example.ini
Co-authored-by: mrsdizzie <info@mrsdizzie.com>
Co-authored-by: mrsdizzie <info@mrsdizzie.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Move EventSource to use a SharedWorker. This prevents issues with HTTP/1.1
open browser connections from preventing gitea from opening multiple tabs.
Also allow setting EVENT_SOURCE_UPDATE_TIME to disable EventSource updating
Fix#11978
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Rename custom/conf/app.ini.sample to custom/conf/app.sample.ini for better syntax light on editor
* rename to app.example.ini
* per @6543 's comment, update all references on docs
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
