powerdns-admin: clean up old pods using same name on start if needed

This reverts commit c37c22eb4f.

.forgejo/workflows/build-deployer.yaml

@@ -0,0 +1,22 @@
+on:
+  push:
+    paths:
+      - containers/deployer/**
+      - .forgejo/workflows/build-deployer.yaml
+jobs:
+  build-deployer:
+    runs-on: docker
+    container:
+      image: library/docker:dind
+    steps:
+      - run: apk add --no-cache nodejs git
+      - name: login to container registry
+        run: echo "${{ secrets.DEPLOY_TOKEN }}" | docker login --username ${{ secrets.DEPLOY_USER }} --password-stdin git.janky.solutions
+      - name: build container image
+        uses: docker/build-push-action@v6
+        with:
+          file: Containerfile
+          context: "{{defaultContext}}:containers/deployer"
+          tags: git.janky.solutions/jankysolutions/infra/deployer:latest
+          platforms: linux/amd64
+          push: ${{ github.ref == 'refs/heads/main' }}

.forgejo/workflows/build-freetakserver.yaml

@@ -18,4 +18,4 @@ jobs:
           context: FreeTakServer
           tags: git.janky.solutions/jankysolutions/infra/freetakserver:latest
           platforms: linux/amd64
-          push: true
+          push: ${{ github.ref == 'refs/heads/main' }}

.forgejo/workflows/build-keycloak.yaml

@@ -19,4 +19,4 @@ jobs:
           context: "{{defaultContext}}:containers/keycloak"
           tags: git.janky.solutions/jankysolutions/infra/keycloak:latest
           platforms: linux/amd64
-          push: true
+          push: ${{ github.ref == 'refs/heads/main' }}

.forgejo/workflows/build-openbao-csi-provider.yaml

@@ -19,4 +19,4 @@ jobs:
           context: "{{defaultContext}}:containers/openbao-csi-provider"
           tags: git.janky.solutions/jankysolutions/infra/openbao-csi-provider:latest
           platforms: linux/amd64
-          push: true
+          push: ${{ github.ref == 'refs/heads/main' }}

.forgejo/workflows/build-openbao.yaml

@@ -19,4 +19,4 @@ jobs:
           context: "{{defaultContext}}:containers/openbao"
           tags: git.janky.solutions/jankysolutions/infra/openbao:latest
           platforms: linux/amd64
-          push: true
+          push: ${{ github.ref == 'refs/heads/main' }}

.forgejo/workflows/build-pethublocal.yaml

@@ -18,4 +18,4 @@ jobs:
           context: pethublocal
           tags: git.janky.solutions/jankysolutions/infra/pethublocal:latest
           platforms: linux/amd64
-          push: true
+          push: ${{ github.ref == 'refs/heads/main' }}

.forgejo/workflows/build-synapse.yaml

@@ -18,4 +18,4 @@ jobs:
           file: containers/synapse/Containerfile
           tags: git.janky.solutions/jankysolutions/infra/synapse:latest
           platforms: linux/amd64
-          push: true
+          push: ${{ github.ref == 'refs/heads/main' }}

.forgejo/workflows/build-traefik-forward-auth.yaml

@@ -19,4 +19,4 @@ jobs:
           context: "{{defaultContext}}:containers/traefik-forward-auth"
           tags: git.janky.solutions/jankysolutions/infra/traefik-forward-auth:latest
           platforms: linux/amd64
-          push: true
+          push: ${{ github.ref == 'refs/heads/main' }}

.forgejo/workflows/k8s-diff-and-deploy.yaml

@@ -0,0 +1,37 @@
+on:
+  push:
+    paths:
+      - k8s/**
+      - .forgejo/workflows/k8s-diff-and-deploy.yaml
+jobs:
+  diff-and-deploy:
+    runs-on: ubuntu-latest
+    container:
+      image: git.janky.solutions/jankysolutions/infra/deployer:latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: kubectl diff and deploy
+        run: |
+          set -euo pipefail
+          echo "${{ secrets.KUBERNETES_CLIENT_CONFIG }}" > ~/.kube/config
+
+          for component in k8s/*; do
+            if [ ! -d "${component}" ]; then
+              continue
+            fi
+
+            touch "${component}/secrets.yaml"
+
+            echo "👀 $ kubectl diff -k ${component}"
+            kubectl diff -k "${component}" || echo
+
+            if [[ "${GITHUB_REF_NAME}" == "main" ]]; then
+              echo "🚀 $ kubectl apply -k ${component}"
+              if [[ "${component}" == "k8s/operators" ]]; then
+                kubectl apply -k "${component}" --server-side
+              else
+                kubectl apply -k "${component}"
+              fi
+              echo
+            fi
+          done

containers/deployer/Containerfile

@@ -0,0 +1,3 @@
+FROM library/alpine:3.20
+RUN apk add --no-cache nodejs git bash helm kubectl
+RUN mkdir -p ~/.kube

containers/openbao/Containerfile

@@ -1,4 +1,4 @@
-FROM node:23 AS web-build
+FROM node:22 AS web-build
 RUN git clone -b v2.0.0 https://github.com/openbao/openbao /usr/src/openbao
 WORKDIR /usr/src/openbao
 RUN make ember-dist

containers/synapse/Containerfile

@@ -1,4 +1,6 @@
-FROM matrixdotorg/synapse:v1.117.0
+FROM matrixdotorg/synapse:v1.119.0
 RUN pip install boto3 humanize tqdm
-RUN curl -Lo /usr/local/lib/python3.11/site-packages/s3_storage_provider.py https://github.com/matrix-org/synapse-s3-storage-provider/raw/v1.4.0/s3_storage_provider.py
+# there is probably a better way to figure out where the site packages are
+# this used to be hard coded to /usr/local/lib/python3.11/site-packages but then synapse updated it's minor python version and it broke
+RUN curl -Lo $(python -c 'import sys; print([x for x in sys.path if "site-packages" in x][0])')/s3_storage_provider.py https://github.com/matrix-org/synapse-s3-storage-provider/raw/v1.4.0/s3_storage_provider.py
 RUN curl -L https://github.com/matrix-org/synapse-s3-storage-provider/raw/main/scripts/s3_media_upload | sed "s#/usr/bin/env python#/usr/local/bin/python#" > /usr/local/bin/s3_media_upload && chmod +x /usr/local/bin/s3_media_upload

helm/external-secrets/kustomization.yaml

@@ -7,5 +7,5 @@ helmCharts:
       enabled: false # default, bitwarden-sdk-server doesn't work with vaultwarden (https://github.com/external-secrets/bitwarden-sdk-server/issues/18)
   namespace: external-secrets
   releaseName: external-secrets
-  version: 0.10.4
+  version: 0.10.5
   repo: https://charts.external-secrets.io

inventory.yml

@@ -26,13 +26,6 @@ monitoring:
       ansible_host: 10.5.1.251
       home_network: true
 
-    matrix.home.finn.io:
-      ansible_host: 10.5.1.34
-      home_network: true
-      logs:
-        jobs:
-          synapse: /var/log/matrix-synapse/homeserver.log
-
     minio.home.finn.io:
       ansible_host: 10.5.1.250
       home_network: true
@@ -55,6 +48,15 @@ monitoring:
         jobs:
           minecraft: /var/minecraft/logs/*.log
 
+    freepbx:
+      ansible_host: 10.5.1.169
+      home_network: true
+      logs:
+        jobs:
+          apache2: /var/log/apache2/*.log
+          redis: /var/log/redis/*.log
+          asterisk: /var/log/asterisk/*.log
+
 authentik:
   hosts:
     authentik.home.finn.io:

k8s/external-account-rbac/infra-deployer.yaml

@@ -0,0 +1,20 @@
+apiVersion: rbac.authorization.k8s.io/v1
+kind: ClusterRole
+metadata:
+  name: infra-deployer
+rules:
+  - apiGroups: ["*"]
+    resources: ["*"]
+    verbs: ["*"]
+---
+apiVersion: rbac.authorization.k8s.io/v1
+kind: ClusterRoleBinding
+metadata:
+  name: infra-deployer
+roleRef:
+  apiGroup: rbac.authorization.k8s.io
+  kind: ClusterRole
+  name: infra-deployer
+subjects:
+- kind: User
+  name: infra-deployer

k8s/external-account-rbac/kustomization.yaml

@@ -0,0 +1,5 @@
+apiVersion: kustomize.config.k8s.io/v1beta1
+kind: Kustomization
+resources:
+  - infra-deployer.yaml
+  - matrix-bridge-meshtastic-deployer.yaml

k8s/external-account-rbac/matrix-bridge-meshtastic-deployer.yaml

@@ -0,0 +1,22 @@
+apiVersion: rbac.authorization.k8s.io/v1
+kind: Role
+metadata:
+  name: matrix-bridge-meshtastic-deployer
+  namespace: meshtastic
+rules:
+  - apiGroups: ["apps"]
+    resources: ["deployments"]
+    verbs: ["get", "patch"]
+---
+apiVersion: rbac.authorization.k8s.io/v1
+kind: RoleBinding
+metadata:
+  name: matrix-bridge-meshtastic-deployer
+  namespace: meshtastic
+roleRef:
+  apiGroup: rbac.authorization.k8s.io
+  kind: Role
+  name: matrix-bridge-meshtastic-deployer
+subjects:
+- kind: User
+  name: matrix-bridge-meshtastic-deployer

k8s/forgejo/forgejo-secret-sync.yaml

@@ -0,0 +1,62 @@
+apiVersion: batch/v1
+kind: CronJob
+metadata:
+  name: forgejo-secret-sync
+spec:
+  schedule: "0 0 * * *"
+  jobTemplate:
+    spec:
+      template:
+        spec:
+          containers:
+            - name: secret-sync
+              image: library/python:3
+              command:
+                - bash
+                - -c
+                - pip install requests && python /code/forgejo-secret-sync.py
+              env:
+                - name: REPO_MAPPINGS
+                  value: |
+                    [
+                      {"k8s_name": "infra-deployer", "owner": "JankySolutions", "repo": "infra"}
+                    ]
+              envFrom:
+                - secretRef:
+                    name: forgejo-secret-sync
+              volumeMounts:
+                - name: code
+                  mountPath: /code
+                - name: host-tls
+                  mountPath: /var/lib/rancher/k3s/server/tls
+          restartPolicy: OnFailure
+          affinity:
+            nodeAffinity:
+              requiredDuringSchedulingIgnoredDuringExecution:
+                nodeSelectorTerms:
+                  - matchExpressions:
+                      - key: node-role.kubernetes.io/control-plane
+                        operator: In
+                        values: ["true"]
+          volumes:
+            - name: code
+              configMap:
+                name: forgejo-secret-sync
+            - name: host-tls
+              hostPath:
+                path: /var/lib/rancher/k3s/server/tls
+---
+apiVersion: external-secrets.io/v1beta1
+kind: ExternalSecret
+metadata:
+  name: forgejo-secret-sync
+spec:
+  secretStoreRef:
+    kind: SecretStore
+    name: openbao
+  target:
+    name: forgejo-secret-sync
+    creationPolicy: Owner
+  dataFrom:
+    - extract:
+        key: forgejo/default/secret-sync

k8s/forgejo/forgejo-secret-sync/forgejo-secret-sync.py

@@ -0,0 +1,86 @@
+#!/usr/bin/env python3
+import subprocess
+import logging
+import base64
+import os
+import requests
+import json
+
+logging.basicConfig(level=logging.DEBUG)
+
+with open("/var/lib/rancher/k3s/server/tls/server-ca.crt") as f:
+    ca = base64.b64encode(f.read().encode()).decode()
+
+forgejo_token = os.getenv("FORGEJO_TOKEN")
+
+
+def run(cmd: list[str], stdin=None) -> str:
+    logging.debug("executing %s", cmd)
+    p = subprocess.Popen(cmd, stdout=subprocess.PIPE, stdin=subprocess.PIPE)
+    out = p.communicate(stdin)
+    if p.returncode != 0:
+        logging.critical("{} exited with code {}", cmd, p.returncode)
+        os.exit(1)
+    return out[0]
+
+
+def update_cert(k8s_name: str, owner: str, repo: str):
+    key = run(["openssl", "genrsa", "4096"])
+    req = run(
+        ["openssl", "req", "-key", "/dev/stdin", "-new", "-nodes", "-subj", f"/CN={k8s_name}"], stdin=key
+    )
+    cert = run(
+        [
+            "openssl",
+            "x509",
+            "-req",
+            "-CA",
+            "/var/lib/rancher/k3s/server/tls/client-ca.nochain.crt",
+            "-CAkey",
+            "/var/lib/rancher/k3s/server/tls/client-ca.key",
+            "-CAcreateserial",
+            "-days",
+            "10",
+        ],
+        stdin=req,
+    )
+
+    keyb64 = base64.b64encode(key).decode()
+    certb64 = base64.b64encode(cert).decode()
+
+    kubeconfig = f"""
+apiVersion: v1
+clusters:
+- cluster:
+    certificate-authority-data: {ca}
+    server: https://10.5.1.110:6443
+  name: default
+contexts:
+- context:
+    cluster: default
+    user: default
+  name: default
+current-context: default
+kind: Config
+preferences: {"{}"}
+users:
+- name: default
+  user:
+    client-certificate-data: {certb64}
+    client-key-data: {keyb64}
+"""
+    logging.info(f"updating secret for {owner}/{repo}")
+    requests.put(
+        f"https://git.janky.solutions/api/v1/repos/{owner}/{repo}/actions/secrets/KUBERNETES_CLIENT_CONFIG",
+        data=json.dumps(
+            {"data": kubeconfig},
+        ),
+        headers={
+            "Authorization": f"token {forgejo_token}",
+            "Content-Type": "application/json",
+        },
+    ).raise_for_status()
+
+
+for entry in json.loads(os.getenv("REPO_MAPPINGS")):
+    update_cert(**entry)

k8s/forgejo/kustomization.yaml

@@ -5,8 +5,10 @@ resources:
   - namespace.yaml
   - config.yaml
   - ingress.yaml
+  - forgejo-secret-sync.yaml
   - services.yaml
   - statefulset.yaml
+  - secret-store.yaml
   - secrets.yaml
   - renovatebot.yaml
 configMapGenerator:
@@ -16,3 +18,6 @@ configMapGenerator:
   - name: renovate-config
     files:
       - renovate/config.js
+  - name: forgejo-secret-sync
+    files:
+      - forgejo-secret-sync/forgejo-secret-sync.py

k8s/forgejo/renovatebot.yaml

@@ -11,7 +11,7 @@ spec:
         spec:
           containers:
             - name: renovate
-              image: ghcr.io/renovatebot/renovate:38.124-full
+              image: ghcr.io/renovatebot/renovate:39
               env:
                 - name: RENOVATE_CONFIG_FILE
                   value: /etc/renovate/config.js

k8s/forgejo/secret-store.yaml

@@ -0,0 +1,16 @@
+apiVersion: external-secrets.io/v1beta1
+kind: SecretStore
+metadata:
+  name: openbao
+spec:
+  provider:
+    vault:
+      server: http://openbao.openbao:8200
+      path: static-secrets
+      version: v2
+      auth:
+        kubernetes:
+          mountPath: kubernetes
+          role: kubernetes-default
+          serviceAccountRef:
+            name: default

k8s/forgejo/statefulset.yaml

@@ -14,7 +14,7 @@ spec:
         app: forgejo
     spec:
       containers:
-      - image: codeberg.org/forgejo/forgejo:9.0.0
+      - image: codeberg.org/forgejo/forgejo:9.0.2
         imagePullPolicy: Always
         name: forgejo
         resources: {}

k8s/generic-device-plugin/ds.yaml

@@ -46,8 +46,8 @@ spec:
           groups:
             - count: 1
               usb:
-              - vendor: "1A86"
-                product: "55D4"
+              - vendor: "10C4"
+                product: "EA60"
         name: generic-device-plugin
         resources:
           requests:

k8s/invoiceninja/database.yaml

@@ -30,7 +30,7 @@ spec:
     spec:
       containers:
       - name: mysql
-        image: mysql:8
+        image: docker.io/library/mysql:8.4.3
         envFrom:
           - secretRef:
               name: mysql

k8s/keycloak/database.yaml

@@ -6,7 +6,7 @@ spec:
   spiloFSGroup: 103 # https://github.com/zalando/postgres-operator/issues/988
   teamId: keycloak
   volume:
-    size: 10Gi
+    size: 20Gi
   numberOfInstances: 2
   users:
     superuser:

k8s/matrix/appservices-janky.solutions/telegram.yaml

@@ -1,17 +0,0 @@
-id: telegram
-as_token: SECRET_TELEGRAM_AS_TOKEN
-hs_token: SECRET_TELEGRAM_HS_TOKEN
-namespaces:
-    users:
-    - exclusive: true
-      regex: '@telegram_.*:janky\.solutions'
-    - exclusive: true
-      regex: '@telegrambot:janky\.solutions'
-    aliases:
-    - exclusive: true
-      regex: \#telegram_.*:janky\.solutions
-url: http://bridge-telegram:29317
-sender_localpart: SECRET_TELEGRAM_SENDER_LOCALPART
-rate_limited: false
-de.sorunome.msc2409.push_ephemeral: true
-push_ephemeral: true

k8s/matrix/bridge-facebook.yaml

@@ -60,7 +60,7 @@ spec:
             - secretRef:
                 name: bridge-facebook
       containers:
-      - image: dock.mau.dev/mautrix/meta:v0.4.1
+      - image: dock.mau.dev/mautrix/meta:v0.4.2
         name: bridge-facebook
         resources: {}
         command: ["/usr/bin/mautrix-meta", "-c", "/data/config.yaml", "--no-update"]
@@ -70,8 +70,6 @@ spec:
         volumeMounts:
           - name: storage
             mountPath: /data
-          - name: config
-            mountPath: /config
       volumes:
         - name: config
           configMap:
@@ -170,8 +168,8 @@ data:
         async_transactions: false
         
         # Authentication tokens for AS <-> HS communication. Autogenerated; do not modify.
-        as_token: "AS_TOKEN"
-        hs_token: "HS_TOKEN"
+        as_token: "SECRET_FACEBOOK_AS_TOKEN"
+        hs_token: "SECRET_FACEBOOK_HS_TOKEN"
 
     meta:
         # Which service is this bridge for? Available options:

k8s/matrix/bridge-signal.yaml

@@ -57,7 +57,7 @@ spec:
             - secretRef:
                 name: bridge-signal
       containers:
-        - image: dock.mau.dev/mautrix/signal:v0.7.2
+        - image: dock.mau.dev/mautrix/signal:v0.7.3
           name: bridge-signal
           resources: {}
           ports:
@@ -162,8 +162,8 @@ data:
         async_transactions: false
         
         # Authentication tokens for AS <-> HS communication. Autogenerated; do not modify.
-        as_token: "AS_TOKEN"
-        hs_token: "HS_TOKEN"
+        as_token: "SECRET_SIGNAL_AS_TOKEN"
+        hs_token: "SECRET_SIGNAL_HS_TOKEN"
 
     # Prometheus config.
     metrics:

k8s/matrix/bridge-telegram.yaml

@@ -1,752 +0,0 @@
-apiVersion: networking.k8s.io/v1
-kind: Ingress
-metadata:
-  name: bridge-telegram
-  namespace: matrix
-spec:
-  rules:
-    - host: bridge-telegram.matrix.k8s
-      http:
-        paths:
-          - path: /
-            pathType: Prefix
-            backend:
-              service:
-                name:  bridge-telegram
-                port:
-                  name: bridge
----
-apiVersion: networking.k8s.io/v1
-kind: Ingress
-metadata:
-  name: bridge-telegram-public
-  namespace: matrix
-spec:
-  rules:
-    - host: telegram-bridge.k8s.home.finn.io
-      http:
-        paths:
-          - path: /public
-            pathType: Prefix
-            backend:
-              service:
-                name:  bridge-telegram
-                port:
-                  name: bridge
----
-apiVersion: v1
-kind: Service
-metadata:
-  name: bridge-telegram
-  namespace: matrix
-spec:
-  publishNotReadyAddresses: true
-  ports:
-  - name: bridge
-    port: 29317
-  selector:
-    app: bridge-telegram
----
-apiVersion: apps/v1
-kind: StatefulSet
-metadata:
-  name: bridge-telegram
-  namespace: matrix
-spec:
-  selector:
-    matchLabels:
-      app: bridge-telegram
-  serviceName: bridge-telegram
-  replicas: 1
-  template:
-    metadata:
-      labels:
-        app: bridge-telegram
-    spec:
-      initContainers:
-        - name: initialize-secrets
-          image: docker.io/library/python
-          command: ["python", "/init/initialize-secrets.py", "config.yaml"]
-          volumeMounts:
-            - name: init
-              mountPath: /init
-            - name: storage
-              mountPath: /data
-            - name: config
-              mountPath: /config
-          envFrom:
-            - secretRef:
-                name: bridge-telegram
-      containers:
-      - image: dock.mau.dev/mautrix/telegram:v0.15.2
-        name: bridge-telegram
-        resources: {}
-        command: ["python3", "-m", "mautrix_telegram", "-c", "/data/config.yaml"]
-        ports:
-          - name: bridge
-            containerPort: 29317
-        volumeMounts:
-          - name: storage
-            mountPath: /data
-          - name: config
-            mountPath: /config
-      volumes:
-        - name: config
-          configMap:
-            name: bridge-telegram
-        - name: init
-          configMap:
-            name: secrets-init
-  volumeClaimTemplates:
-  - metadata:
-      name: storage
-    spec:
-      accessModes: ["ReadWriteOnce"]
-      resources:
-        requests:
-          storage: 1Gi
----
-apiVersion: v1
-kind: ConfigMap
-metadata:
-  name: bridge-telegram
-  namespace: matrix
-data:
-  config.yaml: |
-    # Homeserver details
-    homeserver:
-        # The address that this appservice can use to connect to the homeserver.
-        address: https://matrix.janky.solutions
-        # The domain of the homeserver (for MXIDs, etc).
-        domain: janky.solutions
-        # Whether or not to verify the SSL certificate of the homeserver.
-        # Only applies if address starts with https://
-        verify_ssl: true
-        # What software is the homeserver running?
-        # Standard Matrix homeservers like Synapse, Dendrite and Conduit should just use "standard" here.
-        software: standard
-        # Number of retries for all HTTP requests if the homeserver isn't reachable.
-        http_retry_count: 4
-        # The URL to push real-time bridge status to.
-        # If set, the bridge will make POST requests to this URL whenever a user's Telegram connection state changes.
-        # The bridge will use the appservice as_token to authorize requests.
-        status_endpoint: null
-        # Endpoint for reporting per-message status.
-        message_send_checkpoint_endpoint: null
-        # Whether asynchronous uploads via MSC2246 should be enabled for media.
-        # Requires a media repo that supports MSC2246.
-        async_media: false
-    # Application service host/registration related details
-    # Changing these values requires regeneration of the registration.
-    appservice:
-        # The address that the homeserver can use to connect to this appservice.
-        address: http://bridge-telegram.matrix.k8s:80
-        # When using https:// the TLS certificate and key files for the address.
-        tls_cert: false
-        tls_key: false
-        # The hostname and port where this appservice should listen.
-        hostname: 0.0.0.0
-        port: 29317
-        # The maximum body size of appservice API requests (from the homeserver) in mebibytes
-        # Usually 1 is enough, but on high-traffic bridges you might need to increase this to avoid 413s
-        max_body_size: 1
-        # The full URI to the database. SQLite and Postgres are supported.
-        # Format examples:
-        #   SQLite:   sqlite:filename.db
-        #   Postgres: postgres://username:password@hostname/dbname
-        database: sqlite:/data/telegram.db
-        # Additional arguments for asyncpg.create_pool() or sqlite3.connect()
-        # https://magicstack.github.io/asyncpg/current/api/index.html#asyncpg.pool.create_pool
-        # https://docs.python.org/3/library/sqlite3.html#sqlite3.connect
-        # For sqlite, min_size is used as the connection thread pool size and max_size is ignored.
-        # Additionally, SQLite supports init_commands as an array of SQL queries to run on connect (e.g. to set PRAGMAs).
-        database_opts:
-            min_size: 1
-            max_size: 10
-        # Public part of web server for out-of-Matrix interaction with the bridge.
-        # Used for things like login if the user wants to make sure the 2FA password isn't stored in
-        # the HS database.
-        public:
-            # Whether or not the public-facing endpoints should be enabled.
-            enabled: true
-            # The prefix to use in the public-facing endpoints.
-            prefix: /public
-            # The base URL where the public-facing endpoints are available. The prefix is not added
-            # implicitly.
-            external: https://telegram-bridge.k8s.home.finn.io/public
-        # Provisioning API part of the web server for automated portal creation and fetching information.
-        # Used by things like mautrix-manager (https://github.com/tulir/mautrix-manager).
-        provisioning:
-            # Whether or not the provisioning API should be enabled.
-            enabled: true
-            # The prefix to use in the provisioning API endpoints.
-            prefix: /_matrix/provision
-            # The shared secret to authorize users of the API.
-            # Set to "generate" to generate and save a new token.
-            shared_secret: generate
-        # The unique ID of this appservice.
-        id: telegram
-        # Username of the appservice bot.
-        bot_username: telegrambot
-        # Display name and avatar for bot. Set to "remove" to remove display name/avatar, leave empty
-        # to leave display name/avatar as-is.
-        bot_displayname: Telegram bridge bot
-        bot_avatar: mxc://maunium.net/tJCRmUyJDsgRNgqhOgoiHWbX
-        # Whether or not to receive ephemeral events via appservice transactions.
-        # Requires MSC2409 support (i.e. Synapse 1.22+).
-        # You should disable bridge -> sync_with_custom_puppets when this is enabled.
-        ephemeral_events: true
-        # Authentication tokens for AS <-> HS communication. Autogenerated; do not modify.
-        as_token: "AS_TOKEN"
-        hs_token: "HS_TOKEN"
-    # Prometheus telemetry config. Requires prometheus-client to be installed.
-    metrics:
-        enabled: true
-        listen_port: 8000
-    # Manhole config.
-    manhole:
-        # Whether or not opening the manhole is allowed.
-        enabled: false
-        # The path for the unix socket.
-        path: /var/tmp/mautrix-telegram.manhole
-        # The list of UIDs who can be added to the whitelist.
-        # If empty, any UIDs can be specified in the open-manhole command.
-        whitelist:
-            - 0
-    # Bridge config
-    bridge:
-        # Localpart template of MXIDs for Telegram users.
-        # {userid} is replaced with the user ID of the Telegram user.
-        username_template: "telegram_{userid}"
-        # Localpart template of room aliases for Telegram portal rooms.
-        # {groupname} is replaced with the name part of the public channel/group invite link ( https://t.me/{} )
-        alias_template: "telegram_{groupname}"
-        # Displayname template for Telegram users.
-        # {displayname} is replaced with the display name of the Telegram user.
-        displayname_template: "{displayname} (Telegram)"
-        # Set the preferred order of user identifiers which to use in the Matrix puppet display name.
-        # In the (hopefully unlikely) scenario that none of the given keys are found, the numeric user
-        # ID is used.
-        #
-        # If the bridge is working properly, a phone number or an username should always be known, but
-        # the other one can very well be empty.
-        #
-        # Valid keys:
-        #   "full name"          (First and/or last name)
-        #   "full name reversed" (Last and/or first name)
-        #   "first name"
-        #   "last name"
-        #   "username"
-        #   "phone number"
-        displayname_preference:
-            - full name
-            - username
-            - phone number
-        # Maximum length of displayname
-        displayname_max_length: 100
-        # Remove avatars from Telegram ghost users when removed on Telegram. This is disabled by default
-        # as there's no way to determine whether an avatar is removed or just hidden from some users. If
-        # you're on a single-user instance, this should be safe to enable.
-        allow_avatar_remove: false
-        # Should contact names and profile pictures be allowed?
-        # This is only safe to enable on single-user instances.
-        allow_contact_info: false
-        # Maximum number of members to sync per portal when starting up. Other members will be
-        # synced when they send messages. The maximum is 10000, after which the Telegram server
-        # will not send any more members.
-        # -1 means no limit (which means it's limited to 10000 by the server)
-        max_initial_member_sync: 100
-        # Maximum number of participants in chats to bridge. Only applies when the portal is being created.
-        # If there are more members when trying to create a room, the room creation will be cancelled.
-        # -1 means no limit (which means all chats can be bridged)
-        max_member_count: -1
-        # Whether or not to sync the member list in channels.
-        # If no channel admins have logged into the bridge, the bridge won't be able to sync the member
-        # list regardless of this setting.
-        sync_channel_members: false
-        # Whether or not to skip deleted members when syncing members.
-        skip_deleted_members: true
-        # Whether or not to automatically synchronize contacts and chats of Matrix users logged into
-        # their Telegram account at startup.
-        startup_sync: false
-        # Number of most recently active dialogs to check when syncing chats.
-        # Set to 0 to remove limit.
-        sync_update_limit: 0
-        # Number of most recently active dialogs to create portals for when syncing chats.
-        # Set to 0 to remove limit.
-        sync_create_limit: 15
-        # Should all chats be scheduled to be created later?
-        # This is best used in combination with MSC2716 infinite backfill.
-        sync_deferred_create_all: false
-        # Whether or not to sync and create portals for direct chats at startup.
-        sync_direct_chats: false
-        # The maximum number of simultaneous Telegram deletions to handle.
-        # A large number of simultaneous redactions could put strain on your homeserver.
-        max_telegram_delete: 10
-        # Whether or not to automatically sync the Matrix room state (mostly unpuppeted displaynames)
-        # at startup and when creating a bridge.
-        sync_matrix_state: true
-        # Allow logging in within Matrix. If false, users can only log in using login-qr or the
-        # out-of-Matrix login website (see appservice.public config section)
-        allow_matrix_login: true
-        # Whether or not to make portals of publicly joinable channels/supergroups publicly joinable on Matrix.
-        public_portals: false
-        # Whether or not to use /sync to get presence, read receipts and typing notifications
-        # when double puppeting is enabled
-        sync_with_custom_puppets: false
-        # Whether or not to update the m.direct account data event when double puppeting is enabled.
-        # Note that updating the m.direct event is not atomic (except with mautrix-asmux)
-        # and is therefore prone to race conditions.
-        sync_direct_chat_list: false
-        # Servers to always allow double puppeting from
-        double_puppet_server_map:
-            example.com: https://example.com
-        # Allow using double puppeting from any server with a valid client .well-known file.
-        double_puppet_allow_discovery: false
-        # Shared secrets for https://github.com/devture/matrix-synapse-shared-secret-auth
-        #
-        # If set, custom puppets will be enabled automatically for local users
-        # instead of users having to find an access token and run `login-matrix`
-        # manually.
-        # If using this for other servers than the bridge's server,
-        # you must also set the URL in the double_puppet_server_map.
-        login_shared_secret_map:
-            example.com: foobar
-        # Set to false to disable link previews in messages sent to Telegram.
-        telegram_link_preview: true
-        # Whether or not the !tg join command should do a HTTP request
-        # to resolve redirects in invite links.
-        invite_link_resolve: false
-        # Send captions in the same message as images. This will send data compatible with both MSC2530 and MSC3552.
-        # This is currently not supported in most clients.
-        caption_in_message: false
-        # Maximum size of image in megabytes before sending to Telegram as a document.
-        image_as_file_size: 10
-        # Maximum number of pixels in an image before sending to Telegram as a document. Defaults to 4096x4096 = 16777216.
-        image_as_file_pixels: 16777216
-        # Maximum size of Telegram documents before linking to Telegrm instead of bridge
-        # to Matrix media.
-        document_as_link_size:
-            channel:
-            bot:
-        # Enable experimental parallel file transfer, which makes uploads/downloads much faster by
-        # streaming from/to Matrix and using many connections for Telegram.
-        # Note that generating HQ thumbnails for videos is not possible with streamed transfers.
-        # This option uses internal Telethon implementation details and may break with minor updates.
-        parallel_file_transfer: false
-        # Whether or not created rooms should have federation enabled.
-        # If false, created portal rooms will never be federated.
-        federate_rooms: true
-        # Should the bridge send all unicode reactions as custom emoji reactions to Telegram?
-        # By default, the bridge only uses custom emojis for unicode emojis that aren't allowed in reactions.
-        always_custom_emoji_reaction: false
-        # Settings for converting animated stickers.
-        animated_sticker:
-            # Format to which animated stickers should be converted.
-            # disable - No conversion, send as-is (gzipped lottie)
-            # png - converts to non-animated png (fastest),
-            # gif - converts to animated gif
-            # webm - converts to webm video, requires ffmpeg executable with vp9 codec and webm container support
-            # webp - converts to animated webp, requires ffmpeg executable with webp codec/container support
-            target: gif
-            # Should video stickers be converted to the specified format as well?
-            convert_from_webm: false
-            # Arguments for converter. All converters take width and height.
-            args:
-                width: 256
-                height: 256
-                fps: 25 # only for webm, webp and gif (2, 5, 10, 20 or 25 recommended)
-        # Settings for converting animated emoji.
-        # Same as animated_sticker, but webm is not supported as the target
-        # (because inline images can only contain images, not videos).
-        animated_emoji:
-            target: webp
-            args:
-                width: 64
-                height: 64
-                fps: 25
-        # End-to-bridge encryption support options.
-        #
-        # See https://docs.mau.fi/bridges/general/end-to-bridge-encryption.html for more info.
-        encryption:
-            # Allow encryption, work in group chat rooms with e2ee enabled
-            allow: false
-            # Default to encryption, force-enable encryption in all portals the bridge creates
-            # This will cause the bridge bot to be in private chats for the encryption to work properly.
-            default: false
-            # Whether to use MSC2409/MSC3202 instead of /sync long polling for receiving encryption-related data.
-            appservice: false
-            # Require encryption, drop any unencrypted messages.
-            require: false
-            # Enable key sharing? If enabled, key requests for rooms where users are in will be fulfilled.
-            # You must use a client that supports requesting keys from other users to use this feature.
-            allow_key_sharing: false
-            # Options for deleting megolm sessions from the bridge.
-            delete_keys:
-                # Beeper-specific: delete outbound sessions when hungryserv confirms
-                # that the user has uploaded the key to key backup.
-                delete_outbound_on_ack: false
-                # Don't store outbound sessions in the inbound table.
-                dont_store_outbound: false
-                # Ratchet megolm sessions forward after decrypting messages.
-                ratchet_on_decrypt: false
-                # Delete fully used keys (index >= max_messages) after decrypting messages.
-                delete_fully_used_on_decrypt: false
-                # Delete previous megolm sessions from same device when receiving a new one.
-                delete_prev_on_new_session: false
-                # Delete megolm sessions received from a device when the device is deleted.
-                delete_on_device_delete: false
-                # Periodically delete megolm sessions when 2x max_age has passed since receiving the session.
-                periodically_delete_expired: false
-                # Delete inbound megolm sessions that don't have the received_at field used for
-                # automatic ratcheting and expired session deletion. This is meant as a migration
-                # to delete old keys prior to the bridge update.
-                delete_outdated_inbound: false
-            # What level of device verification should be required from users?
-            #
-            # Valid levels:
-            #   unverified - Send keys to all device in the room.
-            #   cross-signed-untrusted - Require valid cross-signing, but trust all cross-signing keys.
-            #   cross-signed-tofu - Require valid cross-signing, trust cross-signing keys on first use (and reject changes).
-            #   cross-signed-verified - Require valid cross-signing, plus a valid user signature from the bridge bot.
-            #                           Note that creating user signatures from the bridge bot is not currently possible.
-            #   verified - Require manual per-device verification
-            #              (currently only possible by modifying the `trust` column in the `crypto_device` database table).
-            verification_levels:
-                # Minimum level for which the bridge should send keys to when bridging messages from Telegram to Matrix.
-                receive: unverified
-                # Minimum level that the bridge should accept for incoming Matrix messages.
-                send: unverified
-                # Minimum level that the bridge should require for accepting key requests.
-                share: cross-signed-tofu
-            # Options for Megolm room key rotation. These options allow you to
-            # configure the m.room.encryption event content. See:
-            # https://spec.matrix.org/v1.3/client-server-api/#mroomencryption for
-            # more information about that event.
-            rotation:
-                # Enable custom Megolm room key rotation settings. Note that these
-                # settings will only apply to rooms created after this option is
-                # set.
-                enable_custom: false
-                # The maximum number of milliseconds a session should be used
-                # before changing it. The Matrix spec recommends 604800000 (a week)
-                # as the default.
-                milliseconds: 604800000
-                # The maximum number of messages that should be sent with a given a
-                # session before changing it. The Matrix spec recommends 100 as the
-                # default.
-                messages: 100
-                # Disable rotating keys when a user's devices change?
-                # You should not enable this option unless you understand all the implications.
-                disable_device_change_key_rotation: false
-        # Whether to explicitly set the avatar and room name for private chat portal rooms.
-        # If set to `default`, this will be enabled in encrypted rooms and disabled in unencrypted rooms.
-        # If set to `always`, all DM rooms will have explicit names and avatars set.
-        # If set to `never`, DM rooms will never have names and avatars set.
-        private_chat_portal_meta: default
-        # Disable generating reply fallbacks? Some extremely bad clients still rely on them,
-        # but they're being phased out and will be completely removed in the future.
-        disable_reply_fallbacks: false
-        # Should cross-chat replies from Telegram be bridged? Most servers and clients don't support this.
-        cross_room_replies: false
-        # Whether or not the bridge should send a read receipt from the bridge bot when a message has
-        # been sent to Telegram.
-        delivery_receipts: false
-        # Whether or not delivery errors should be reported as messages in the Matrix room.
-        delivery_error_reports: false
-        # Should errors in incoming message handling send a message to the Matrix room?
-        incoming_bridge_error_reports: false
-        # Whether the bridge should send the message status as a custom com.beeper.message_send_status event.
-        message_status_events: false
-        # Set this to true to tell the bridge to re-send m.bridge events to all rooms on the next run.
-        # This field will automatically be changed back to false after it,
-        # except if the config file is not writable.
-        resend_bridge_info: false
-        # When using double puppeting, should muted chats be muted in Matrix?
-        mute_bridging: false
-        # When using double puppeting, should pinned chats be moved to a specific tag in Matrix?
-        # The favorites tag is `m.favourite`.
-        pinned_tag: null
-        # Same as above for archived chats, the low priority tag is `m.lowpriority`.
-        archive_tag: null
-        # Whether or not mute status and tags should only be bridged when the portal room is created.
-        tag_only_on_create: true
-        # Should leaving the room on Matrix make the user leave on Telegram?
-        bridge_matrix_leave: true
-        # Should the user be kicked out of all portals when logging out of the bridge?
-        kick_on_logout: true
-        # Should the "* user joined Telegram" notice always be marked as read automatically?
-        always_read_joined_telegram_notice: true
-        # Should the bridge auto-create a group chat on Telegram when a ghost is invited to a room?
-        # Requires the user to have sufficient power level and double puppeting enabled.
-        create_group_on_invite: true
-        # Settings for backfilling messages from Telegram.
-        backfill:
-            # Allow backfilling at all?
-            enable: true
-            # Whether or not to enable backfilling in normal groups.
-            # Normal groups have numerous technical problems in Telegram, and backfilling normal groups
-            # will likely cause problems if there are multiple Matrix users in the group.
-            normal_groups: false
-            # If a backfilled chat is older than this number of hours, mark it as read even if it's unread on Telegram.
-            # Set to -1 to let any chat be unread.
-            unread_hours_threshold: 720
-            # Forward backfilling limits.
-            #
-            # Using a negative initial limit is not recommended, as it would try to backfill everything in a single batch.
-            forward_limits:
-                # Number of messages to backfill immediately after creating a portal.
-                initial:
-                    user: 50
-                    normal_group: 100
-                    supergroup: 10
-                    channel: 10
-                # Number of messages to backfill when syncing chats.
-                sync:
-                    user: 100
-                    normal_group: 100
-                    supergroup: 100
-                    channel: 100
-            # Timeout for forward backfills in seconds. If you have a high limit, you'll have to increase this too.
-            forward_timeout: 900
-            # Settings for incremental backfill of history. These only apply to Beeper, as upstream abandoned MSC2716.
-            incremental:
-                # Maximum number of messages to backfill per batch.
-                messages_per_batch: 100
-                # The number of seconds to wait after backfilling the batch of messages.
-                post_batch_delay: 20
-                # The maximum number of batches to backfill per portal, split by the chat type.
-                # If set to -1, all messages in the chat will eventually be backfilled.
-                max_batches:
-                    # Direct chats
-                    user: -1
-                    # Normal groups. Note that the normal_groups option above must be enabled
-                    # for these to be backfilled.
-                    normal_group: -1
-                    # Supergroups
-                    supergroup: 10
-                    # Broadcast channels
-                    channel: -1
-        # Overrides for base power levels.
-        initial_power_level_overrides:
-            user: {}
-            group: {}
-        # Whether to bridge Telegram bot messages as m.notices or m.texts.
-        bot_messages_as_notices: true
-        bridge_notices:
-            # Whether or not Matrix bot messages (type m.notice) should be bridged.
-            default: false
-            # List of user IDs for whom the previous flag is flipped.
-            # e.g. if bridge_notices.default is false, notices from other users will not be bridged, but
-            #      notices from users listed here will be bridged.
-            exceptions: []
-        # An array of possible values for the $distinguisher variable in message formats.
-        # Each user gets one of the values here, based on a hash of their user ID.
-        # If the array is empty, the $distinguisher variable will also be empty.
-        relay_user_distinguishers: ["\U0001F7E6", "\U0001F7E3", "\U0001F7E9", "⭕️", "\U0001F536", "⬛️", "\U0001F535", "\U0001F7E2"]
-        # The formats to use when sending messages to Telegram via the relay bot.
-        # Text msgtypes (m.text, m.notice and m.emote) support HTML, media msgtypes don't.
-        #
-        # Available variables:
-        #   $sender_displayname - The display name of the sender (e.g. Example User)
-        #   $sender_username    - The username (Matrix ID localpart) of the sender (e.g. exampleuser)
-        #   $sender_mxid        - The Matrix ID of the sender (e.g. @exampleuser:example.com)
-        #   $distinguisher      - A random string from the options in the relay_user_distinguishers array.
-        #   $message            - The message content
-        message_formats:
-            m.text: "$distinguisher <b>$sender_displayname</b>: $message"
-            m.notice: "$distinguisher <b>$sender_displayname</b>: $message"
-            m.emote: "* $distinguisher <b>$sender_displayname</b> $message"
-            m.file: "$distinguisher <b>$sender_displayname</b> sent a file: $message"
-            m.image: "$distinguisher <b>$sender_displayname</b> sent an image: $message"
-            m.audio: "$distinguisher <b>$sender_displayname</b> sent an audio file: $message"
-            m.video: "$distinguisher <b>$sender_displayname</b> sent a video: $message"
-            m.location: "$distinguisher <b>$sender_displayname</b> sent a location: $message"
-        # Telegram doesn't have built-in emotes, this field specifies how m.emote's from authenticated
-        # users are sent to telegram. All fields in message_formats are supported. Additionally, the
-        # Telegram user info is available in the following variables:
-        #    $displayname - Telegram displayname
-        #    $username    - Telegram username (may not exist)
-        #    $mention     - Telegram @username or displayname mention (depending on which exists)
-        emote_format: "* $mention $formatted_body"
-        # The formats to use when sending state events to Telegram via the relay bot.
-        #
-        # Variables from `message_formats` that have the `sender_` prefix are available without the prefix.
-        # In name_change events, `$prev_displayname` is the previous displayname.
-        #
-        # Set format to an empty string to disable the messages for that event.
-        state_event_formats:
-            join: "$distinguisher <b>$displayname</b> joined the room."
-            leave: "$distinguisher <b>$displayname</b> left the room."
-            name_change: "$distinguisher <b>$prev_displayname</b> changed their name to $distinguisher <b>$displayname</b>"
-        # Filter rooms that can/can't be bridged. Can also be managed using the `filter` and
-        # `filter-mode` management commands.
-        #
-        # An empty blacklist will essentially disable the filter.
-        filter:
-            # Filter mode to use. Either "blacklist" or "whitelist".
-            # If the mode is "blacklist", the listed chats will never be bridged.
-            # If the mode is "whitelist", only the listed chats can be bridged.
-            mode: blacklist
-            # The list of group/channel IDs to filter.
-            list: []
-            # How to handle direct chats:
-            # If users is "null", direct chats will follow the previous settings.
-            # If users is "true", direct chats will always be bridged.
-            # If users is "false", direct chats will never be bridged.
-            users: true
-        # The prefix for commands. Only required in non-management rooms.
-        command_prefix: "!tg"
-        # Messages sent upon joining a management room.
-        # Markdown is supported. The defaults are listed below.
-        management_room_text:
-            # Sent when joining a room.
-            welcome: "Hello, I'm a Telegram bridge bot."
-            # Sent when joining a management room and the user is already logged in.
-            welcome_connected: "Use `help` for help."
-            # Sent when joining a management room and the user is not logged in.
-            welcome_unconnected: "Use `help` for help or `login` to log in."
-            # Optional extra text sent when joining a management room.
-            additional_help: ""
-        # Send each message separately (for readability in some clients)
-        management_room_multiple_messages: false
-        # Permissions for using the bridge.
-        # Permitted values:
-        #   relaybot - Only use the bridge via the relaybot, no access to commands.
-        #       user - Relaybot level + access to commands to create bridges.
-        #  puppeting - User level + logging in with a Telegram account.
-        #       full - Full access to use the bridge, i.e. previous levels + Matrix login.
-        #      admin - Full access to use the bridge and some extra administration commands.
-        # Permitted keys:
-        #        * - All Matrix users
-        #   domain - All users on that homeserver
-        #     mxid - Specific user
-        permissions:
-            "*": "relaybot"
-            "janky.solutions": "full"
-            "@finn:janky.solutions": "admin"
-        # Options related to the message relay Telegram bot.
-        relaybot:
-            private_chat:
-                # List of users to invite to the portal when someone starts a private chat with the bot.
-                # If empty, private chats with the bot won't create a portal.
-                invite: []
-                # Whether or not to bridge state change messages in relaybot private chats.
-                state_changes: true
-                # When private_chat_invite is empty, this message is sent to users /starting the
-                # relaybot. Telegram's "markdown" is supported.
-                message: This is a Matrix bridge relaybot and does not support direct chats
-            # List of users to invite to all group chat portals created by the bridge.
-            group_chat_invite: []
-            # Whether or not the relaybot should not bridge events in unbridged group chats.
-            # If false, portals will be created when the relaybot receives messages, just like normal
-            # users. This behavior is usually not desirable, as it interferes with manually bridging
-            # the chat to another room.
-            ignore_unbridged_group_chat: true
-            # Whether or not to allow creating portals from Telegram.
-            authless_portals: true
-            # Whether or not to allow Telegram group admins to use the bot commands.
-            whitelist_group_admins: true
-            # Whether or not to ignore incoming events sent by the relay bot.
-            ignore_own_incoming_events: true
-            # List of usernames/user IDs who are also allowed to use the bot commands.
-            whitelist:
-                - myusername
-                - 12345678
-    # Telegram config
-    telegram:
-        # Get your own API keys at https://my.telegram.org/apps
-        api_id: TG_API_ID
-        api_hash: TG_API_HASH
-        # (Optional) Create your own bot at https://t.me/BotFather
-        bot_token: disabled
-        # Should the bridge request missed updates from Telegram when restarting?
-        catch_up: true
-        # Should incoming updates be handled sequentially to make sure order is preserved on Matrix?
-        sequential_updates: true
-        exit_on_update_error: false
-        # Interval to force refresh the connection (full reconnect). 0 disables it.
-        force_refresh_interval_seconds: 0
-        # Telethon connection options.
-        connection:
-            # The timeout in seconds to be used when connecting.
-            timeout: 120
-            # How many times the reconnection should retry, either on the initial connection or when
-            # Telegram disconnects us. May be set to a negative or null value for infinite retries, but
-            # this is not recommended, since the program can get stuck in an infinite loop.
-            retries: 5
-            # The delay in seconds to sleep between automatic reconnections.
-            retry_delay: 1
-            # The threshold below which the library should automatically sleep on flood wait errors
-            # (inclusive). For instance, if a FloodWaitError for 17s occurs and flood_sleep_threshold
-            # is 20s, the library will sleep automatically. If the error was for 21s, it would raise
-            # the error instead. Values larger than a day (86400) will be changed to a day.
-            flood_sleep_threshold: 60
-            # How many times a request should be retried. Request are retried when Telegram is having
-            # internal issues, when there is a FloodWaitError less than flood_sleep_threshold, or when
-            # there's a migrate error. May take a negative or null value for infinite retries, but this
-            # is not recommended, since some requests can always trigger a call fail (such as searching
-            # for messages).
-            request_retries: 5
-            # Use IPv6 for Telethon connection
-            use_ipv6: false
-        # Device info sent to Telegram.
-        device_info:
-            # "auto" = OS name+version.
-            device_model: mautrix-telegram
-            # "auto" = Telethon version.
-            system_version: auto
-            # "auto" = mautrix-telegram version.
-            app_version: auto
-            lang_code: en
-            system_lang_code: en
-        # Custom server to connect to.
-        server:
-            # Set to true to use these server settings. If false, will automatically
-            # use production server assigned by Telegram. Set to false in production.
-            enabled: false
-            # The DC ID to connect to.
-            dc: 2
-            # The IP to connect to.
-            ip: 149.154.167.40
-            # The port to connect to. 443 may not work, 80 is better and both are equally secure.
-            port: 80
-        # Telethon proxy configuration.
-        # You must install PySocks from pip for proxies to work.
-        proxy:
-            # Allowed types: disabled, socks4, socks5, http, mtproxy
-            type: disabled
-            # Proxy IP address and port.
-            address: 127.0.0.1
-            port: 1080
-            # Whether or not to perform DNS resolving remotely. Only for socks/http proxies.
-            rdns: true
-            # Proxy authentication (optional). Put MTProxy secret in password field.
-            username: ""
-            password: ""
-    # Python logging configuration.
-    #
-    # See section 16.7.2 of the Python documentation for more info:
-    # https://docs.python.org/3.6/library/logging.config.html#configuration-dictionary-schema
-    logging:
-        version: 1
-        formatters:
-            colored:
-                (): mautrix_telegram.util.ColorFormatter
-                format: "[%(asctime)s] [%(levelname)s@%(name)s] %(message)s"
-            normal:
-                format: "[%(asctime)s] [%(levelname)s@%(name)s] %(message)s"
-        handlers:
-            console:
-                class: logging.StreamHandler
-                formatter: colored
-        loggers:
-            mau:
-                level: INFO
-            telethon:
-                level: INFO
-            aiohttp:
-                level: INFO
-        root:
-            level: DEBUG
-            handlers: [console]

k8s/matrix/config-janky.solutions/homeserver.yaml

@@ -24,6 +24,9 @@ form_secret: "SECRET_form_secret"
 signing_key_path: "/secrets/janky.solutions.signing.key"
 trusted_key_servers:
   - server_name: "matrix.org"
+auto_join_rooms:
+  - "#jankysolutions:janky.solutions"
+  - "#general:janky.solutions"
 public_baseurl: https://matrix.janky.solutions
 ip_range_whitelist: [10.5.1.245,10.5.1.1]
 # oidc_providers:
@@ -42,7 +45,6 @@ password_config:
   enabled: false
 app_service_config_files:
   - /data/facebook.yaml
-  - /data/telegram.yaml
   - /data/signal.yaml
 media_storage_providers:
 - module: s3_storage_provider.S3StorageProviderBackend

k8s/matrix/janky.bot-homeserver.yaml

@@ -37,7 +37,7 @@ spec:
             - secretRef:
                 name: synapse-janky-bot
       containers:
-      - image: matrixdotorg/synapse:v1.117.0
+      - image: matrixdotorg/synapse:v1.119.0
         name: synapse
         resources: {}
         volumeMounts:

k8s/matrix/janky.solutions-homeserver.yaml

@@ -38,7 +38,7 @@ spec:
                 name: synapse-janky-solutions
         - name: initialize-bridge-secrets
           image: docker.io/library/python:3
-          command: ["python", "/init/initialize-secrets.py", "facebook.yaml", "telegram.yaml", "signal.yaml"]
+          command: ["python", "/init/initialize-secrets.py", "facebook.yaml", "signal.yaml"]
           volumeMounts:
             - name: init
               mountPath: /init
@@ -64,8 +64,6 @@ spec:
             mountPath: /config
           - name: secrets
             mountPath: /secrets
-          - name: appservices
-            mountPath: /appservices
         env:
           - name: SYNAPSE_SERVER_NAME
             value: matrix.janky.solutions

k8s/matrix/kustomization.yaml

@@ -3,9 +3,8 @@ kind: Kustomization
 namespace: matrix
 resources:
  - namespace.yaml
- - bridge-facebook.yaml
+#  - bridge-facebook.yaml
  - bridge-signal.yaml
- - bridge-telegram.yaml
  - janky.bot-homeserver.yaml
  - janky.solutions-homeserver.yaml
  - secrets.yaml
@@ -22,7 +21,6 @@ configMapGenerator:
   - name: appservices-janky-solutions
     files:
       - appservices-janky.solutions/facebook.yaml
-      - appservices-janky.solutions/telegram.yaml
       - appservices-janky.solutions/signal.yaml
   - name: mas-janky-solutions
     files:

k8s/matrix/mas/config.yaml

@@ -82,8 +82,8 @@ upstream_oauth2:
           action: suggest
           template: "{{ user.name }}"
         email:
-          action: suggest
-          template: "{{ user.email }}"
+          action: require
+          template: "{{ user.name }}@janky.solutions"
           set_email_verification: always
 account:
-  email_change_allowed: false
+  email_change_allowed: true

k8s/meshtastic/kustomization.yaml

@@ -3,8 +3,9 @@ kind: Kustomization
 namespace: meshtastic
 resources:
   - namespace.yaml
-  - matrix-meshtastic-bridge.yaml
-secretGenerator:
-  - name: matrix-meshtastic-bridge
+  - matrix-bridge-meshtastic.yaml
+  - secrets.yaml
+configMapGenerator:
+  - name: matrix-bridge-meshtastic
     files:
-      - matrix-meshtastic-bridge/config.json
+      - matrix-bridge-meshtastic/config.json

k8s/meshtastic/matrix-bridge-meshtastic.yaml

@@ -0,0 +1,44 @@
+apiVersion: apps/v1
+kind: StatefulSet
+metadata:
+  name: matrix-bridge-meshtastic
+spec:
+  selector:
+    matchLabels:
+      app: matrix-bridge-meshtastic
+  serviceName: matrix-bridge-meshtastic
+  replicas: 1
+  template:
+    metadata:
+      labels:
+        app: matrix-bridge-meshtastic
+    spec:
+      containers:
+        - name: matrix-bridge-meshtastic
+          image: git.janky.solutions/finn/matrix-bridge-meshtastic:sha-fae2a30
+          securityContext:
+            privileged: true
+          env:
+            - name: MATRIX_BRIDGE_MESHTASTIC_CONFIG
+              value: /config/config.json
+          envFrom:
+            - secretRef:
+                name: matrix-bridge-meshtastic
+          volumeMounts:
+            - name: config
+              mountPath: /config
+            - name: data
+              mountPath: /data
+      volumes:
+        - name: config
+          configMap:
+            name: matrix-bridge-meshtastic
+  volumeClaimTemplates:
+  - metadata:
+      name: data
+    spec:
+      storageClassName: longhorn
+      accessModes: ["ReadWriteOnce"]
+      resources:
+        requests:
+          storage: 1Gi

k8s/meshtastic/matrix-bridge-meshtastic/config.json

@@ -0,0 +1,11 @@
+{
+    "matrix": {
+        "user": "@meshtastic-test:janky.bot",
+        "room": "!VRoqFXTXJCHdTDdilP:janky.solutions",
+        "state": "/data/matrix.db"
+    },
+    "meshtastic": {
+        "address": "10.5.0.214"
+    },
+    "db": "/data/bridge.db"
+}

k8s/meshtastic/matrix-meshtastic-bridge.yaml

@@ -1,56 +0,0 @@
-apiVersion: apps/v1
-kind: StatefulSet
-metadata:
-  name: matrix-meshtastic-bridge
-spec:
-  selector:
-    matchLabels:
-      app: matrix-meshtastic-bridge
-  serviceName: matrix-meshtastic-bridge
-  replicas: 1
-  template:
-    metadata:
-      labels:
-        app: matrix-meshtastic-bridge
-    spec:
-      tolerations:
-        - key: rtlsdr
-          value: "true"
-          effect: NoSchedule
-      containers:
-        - name: matrix-meshtastic-bridge
-          image: git.janky.solutions/finn/matrix-meshtastic-bridge:sha-008f7cd
-          securityContext:
-            privileged: true
-          env:
-            - name: RUST_LOG
-              value: debug
-            - name: CONFIG_PATH
-              value: /config/config.json
-          resources:
-            limits:
-              janky.solutions/meshtastic: "1"
-          volumeMounts:
-            - name: config
-              mountPath: /config
-            - name: ttyacm0
-              mountPath: /dev/ttyACM0
-            - name: data
-              mountPath: /data
-      volumes:
-        - name: config
-          secret:
-            secretName: matrix-meshtastic-bridge
-        - name: ttyacm0
-          hostPath:
-            type: CharDevice
-            path: /dev/ttyACM0
-  volumeClaimTemplates:
-  - metadata:
-      name: data
-    spec:
-      storageClassName: longhorn
-      accessModes: ["ReadWriteOnce"]
-      resources:
-        requests:
-          storage: 1Gi

k8s/meshtastic/matrix-meshtastic-bridge/config.json

@@ -1,12 +0,0 @@
-{
-    "matrix": {
-        "username": "@meshtastic-test:janky.bot",
-        "room": "!VRoqFXTXJCHdTDdilP:janky.solutions",
-        "user": "@finn:janky.solutions",
-        "state": "/data/matrix.db"
-    },
-    "meshtastic": {
-        "device": "/dev/ttyACM0"
-    },
-    "db": "sqlite:///data/bridge.db"
-}

k8s/miniflux/miniflux.yaml

@@ -16,7 +16,7 @@ spec:
     spec:
       containers:
         - name: miniflux
-          image: docker.io/miniflux/miniflux:2.2.1
+          image: docker.io/miniflux/miniflux:2.2.3
           imagePullPolicy: Always
           resources: {}
           envFrom:

k8s/monica/monica.yaml

@@ -64,7 +64,7 @@ spec:
   - metadata:
       name: storage
     spec:
-      storageClassName: longhorn
+      # storageClassName: longhorn
       accessModes: ["ReadWriteOnce"]
       resources:
         requests:

k8s/monica/mysql.yaml

@@ -27,7 +27,7 @@ spec:
         app: mysql
     spec:
       containers:
-      - image: docker.io/library/mysql:9
+      - image: docker.io/library/mysql:5.7
         name: mysql
         resources: {}
         ports:
@@ -50,7 +50,7 @@ spec:
   - metadata:
       name: storage
     spec:
-      storageClassName: longhorn
+      # storageClassName: longhorn
       accessModes: ["ReadWriteOnce"]
       resources:
         requests:

k8s/monitoring/kustomization.yaml

@@ -9,9 +9,6 @@ resources:
   - thanos.yaml
   - alerts-longhorn.yaml
   - matrix-alertmanager-receiver.yaml
-images:
-  - name: quay.io/thanos/thanos
-    newTag: v0.36.1
 secretGenerator:
   - name: additional-scrape-configs
     options:

k8s/monitoring/matrix-alertmanager-receiver.yaml

@@ -31,7 +31,7 @@ spec:
                 name: matrix-alertmanager-receiver
       containers:
       - name: matrix-alertmanager-receiver
-        image: docker.io/metio/matrix-alertmanager-receiver:2024.10.16
+        image: docker.io/metio/matrix-alertmanager-receiver:2024.11.20
         args: ["--config-path", "/config/config.yaml"]
         resources:
           limits:

k8s/monitoring/prom-scrape-configs/scrape-configs.yaml

@@ -30,12 +30,9 @@
   static_configs:
     - targets:
       - ubnt:9001 # mongod-exporter
-      - ubnt:9130 # unifi-exporter
       - rpi4-build:8080
       - ci-runner-0:8080
       - ci-runner-1:8080
-      - ci-runner-2:8080
-      - ci-runner-3:8080
       - docker:9170 # docker hub prometheus exporter
       - jellyfin:8096 # jellyfin
       - signald:9595 # signald on signald
@@ -67,8 +64,8 @@
       - forgejo-runner-1:9080
       - forgejo-runner-2:9080
       - forgejo-runner-3:9080
-      - forgejo-runner-4:9080
       - monitoring-0:9080
+      - freepbx:9080
 - job_name: node-exporter
   static_configs:
     - targets:
@@ -82,8 +79,6 @@
       - signald:9100
       - ci-runner-0:9100
       - ci-runner-1:9100
-      - ci-runner-2:9100
-      - ci-runner-3:9100
       - media-ingest:9100
       - mc:9100
       - http:9100
@@ -91,27 +86,26 @@
       - mx1.janky.email:9100
       - dns:9100
       - hypervisor-d:9100
-      - livingroom-tv:9100
       - mobile-proxy:9100
       - monitoring-0:9100
       - forgejo-runner-0:9100
       - forgejo-runner-1:9100
       - forgejo-runner-2:9100
       - forgejo-runner-3:9100
-      - forgejo-runner-4:9100
+      - freepbx:9100
 - job_name: minio
   authorization:
     credentials_file: /etc/prometheus/secrets/scrape-secrets/minio.token
   metrics_path: /minio/v2/metrics/cluster
   static_configs:
     - targets: ['minio:9000']
-- job_name: 'home-assistant'
-  metrics_path: /api/prometheus
-  authorization:
-    credentials_file: /etc/prometheus/secrets/scrape-secrets/home-assistant.token
-  static_configs:
-    - targets:
-      - home-assistant:8123
+# - job_name: 'home-assistant'
+#   metrics_path: /api/prometheus
+#   authorization:
+#     credentials_file: /etc/prometheus/secrets/scrape-secrets/home-assistant.token
+#   static_configs:
+#     - targets:
+#       - home-assistant:8123
 - job_name: forgejo
   authorization:
     credentials_file: /etc/prometheus/secrets/scrape-secrets/forgejo.token

k8s/monitoring/thanos.yaml

@@ -18,7 +18,7 @@ spec:
     spec:
       containers:
       - name: thanos-querier
-        image: quay.io/thanos/thanos:latest
+        image: quay.io/thanos/thanos:v0.36.1
         args:
           - query
           - --http-address
@@ -120,7 +120,7 @@ spec:
           valueFrom:
             fieldRef:
               fieldPath: status.hostIP
-        image: quay.io/thanos/thanos:latest
+        image: quay.io/thanos/thanos:v0.36.1
         livenessProbe:
           failureThreshold: 8
           httpGet:

k8s/operators/external-secrets/bitwarden.yaml

@@ -17,7 +17,7 @@ spec:
     spec:
       containers:
         - name: bitwarden-cli
-          image: ghcr.io/charlesthomas/bitwarden-cli:2024.9.0
+          image: ghcr.io/charlesthomas/bitwarden-cli:2024.11.0
           imagePullPolicy: IfNotPresent
           envFrom:
             - secretRef:

k8s/operators/external-secrets/bundle.yaml

@@ -4147,6 +4147,9 @@ spec:
                             type: string
                           projectSlug:
                             type: string
+                          recursive:
+                            default: false
+                            type: boolean
                           secretsPath:
                             default: /
                             type: string
@@ -7505,7 +7508,27 @@ spec:
                 type: array
               selector:
                 description: The Secret Selector (k8s source) for the Push Secret
+                maxProperties: 1
+                minProperties: 1
                 properties:
+                  generatorRef:
+                    description: Point to a generator to create a Secret.
+                    properties:
+                      apiVersion:
+                        default: generators.external-secrets.io/v1alpha1
+                        description: Specify the apiVersion of the generator resource
+                        type: string
+                      kind:
+                        description: Specify the Kind of the resource, e.g. Password,
+                          ACRAccessToken etc.
+                        type: string
+                      name:
+                        description: Specify the name of the generator resource
+                        type: string
+                    required:
+                    - kind
+                    - name
+                    type: object
                   secret:
                     description: Select a Secret to Push.
                     properties:
@@ -7516,8 +7539,6 @@ spec:
                     required:
                     - name
                     type: object
-                required:
-                - secret
                 type: object
               template:
                 description: Template defines a blueprint for the created Secret resource.
@@ -10968,6 +10989,9 @@ spec:
                             type: string
                           projectSlug:
                             type: string
+                          recursive:
+                            default: false
+                            type: boolean
                           secretsPath:
                             default: /
                             type: string
@@ -13671,8 +13695,8 @@ metadata:
     app.kubernetes.io/instance: external-secrets
     app.kubernetes.io/managed-by: Helm
     app.kubernetes.io/name: external-secrets
-    app.kubernetes.io/version: v0.10.4
-    helm.sh/chart: external-secrets-0.10.4
+    app.kubernetes.io/version: v0.10.5
+    helm.sh/chart: external-secrets-0.10.5
   name: external-secrets
   namespace: external-secrets
 ---
@@ -13683,8 +13707,8 @@ metadata:
     app.kubernetes.io/instance: external-secrets
     app.kubernetes.io/managed-by: Helm
     app.kubernetes.io/name: external-secrets-cert-controller
-    app.kubernetes.io/version: v0.10.4
-    helm.sh/chart: external-secrets-0.10.4
+    app.kubernetes.io/version: v0.10.5
+    helm.sh/chart: external-secrets-0.10.5
   name: external-secrets-cert-controller
   namespace: external-secrets
 ---
@@ -13695,8 +13719,8 @@ metadata:
     app.kubernetes.io/instance: external-secrets
     app.kubernetes.io/managed-by: Helm
     app.kubernetes.io/name: external-secrets-webhook
-    app.kubernetes.io/version: v0.10.4
-    helm.sh/chart: external-secrets-0.10.4
+    app.kubernetes.io/version: v0.10.5
+    helm.sh/chart: external-secrets-0.10.5
   name: external-secrets-webhook
   namespace: external-secrets
 ---
@@ -13707,8 +13731,8 @@ metadata:
     app.kubernetes.io/instance: external-secrets
     app.kubernetes.io/managed-by: Helm
     app.kubernetes.io/name: external-secrets
-    app.kubernetes.io/version: v0.10.4
-    helm.sh/chart: external-secrets-0.10.4
+    app.kubernetes.io/version: v0.10.5
+    helm.sh/chart: external-secrets-0.10.5
   name: external-secrets-leaderelection
   namespace: external-secrets
 rules:
@@ -13745,8 +13769,8 @@ metadata:
     app.kubernetes.io/instance: external-secrets
     app.kubernetes.io/managed-by: Helm
     app.kubernetes.io/name: external-secrets-cert-controller
-    app.kubernetes.io/version: v0.10.4
-    helm.sh/chart: external-secrets-0.10.4
+    app.kubernetes.io/version: v0.10.5
+    helm.sh/chart: external-secrets-0.10.5
   name: external-secrets-cert-controller
 rules:
 - apiGroups:
@@ -13819,8 +13843,8 @@ metadata:
     app.kubernetes.io/instance: external-secrets
     app.kubernetes.io/managed-by: Helm
     app.kubernetes.io/name: external-secrets
-    app.kubernetes.io/version: v0.10.4
-    helm.sh/chart: external-secrets-0.10.4
+    app.kubernetes.io/version: v0.10.5
+    helm.sh/chart: external-secrets-0.10.5
   name: external-secrets-controller
 rules:
 - apiGroups:
@@ -13930,8 +13954,8 @@ metadata:
     app.kubernetes.io/instance: external-secrets
     app.kubernetes.io/managed-by: Helm
     app.kubernetes.io/name: external-secrets
-    app.kubernetes.io/version: v0.10.4
-    helm.sh/chart: external-secrets-0.10.4
+    app.kubernetes.io/version: v0.10.5
+    helm.sh/chart: external-secrets-0.10.5
     rbac.authorization.k8s.io/aggregate-to-admin: "true"
     rbac.authorization.k8s.io/aggregate-to-edit: "true"
   name: external-secrets-edit
@@ -13974,8 +13998,8 @@ metadata:
     app.kubernetes.io/instance: external-secrets
     app.kubernetes.io/managed-by: Helm
     app.kubernetes.io/name: external-secrets
-    app.kubernetes.io/version: v0.10.4
-    helm.sh/chart: external-secrets-0.10.4
+    app.kubernetes.io/version: v0.10.5
+    helm.sh/chart: external-secrets-0.10.5
     servicebinding.io/controller: "true"
   name: external-secrets-servicebindings
 rules:
@@ -13995,8 +14019,8 @@ metadata:
     app.kubernetes.io/instance: external-secrets
     app.kubernetes.io/managed-by: Helm
     app.kubernetes.io/name: external-secrets
-    app.kubernetes.io/version: v0.10.4
-    helm.sh/chart: external-secrets-0.10.4
+    app.kubernetes.io/version: v0.10.5
+    helm.sh/chart: external-secrets-0.10.5
     rbac.authorization.k8s.io/aggregate-to-admin: "true"
     rbac.authorization.k8s.io/aggregate-to-edit: "true"
     rbac.authorization.k8s.io/aggregate-to-view: "true"
@@ -14036,8 +14060,8 @@ metadata:
     app.kubernetes.io/instance: external-secrets
     app.kubernetes.io/managed-by: Helm
     app.kubernetes.io/name: external-secrets
-    app.kubernetes.io/version: v0.10.4
-    helm.sh/chart: external-secrets-0.10.4
+    app.kubernetes.io/version: v0.10.5
+    helm.sh/chart: external-secrets-0.10.5
   name: external-secrets-leaderelection
   namespace: external-secrets
 roleRef:
@@ -14056,8 +14080,8 @@ metadata:
     app.kubernetes.io/instance: external-secrets
     app.kubernetes.io/managed-by: Helm
     app.kubernetes.io/name: external-secrets-cert-controller
-    app.kubernetes.io/version: v0.10.4
-    helm.sh/chart: external-secrets-0.10.4
+    app.kubernetes.io/version: v0.10.5
+    helm.sh/chart: external-secrets-0.10.5
   name: external-secrets-cert-controller
 roleRef:
   apiGroup: rbac.authorization.k8s.io
@@ -14075,8 +14099,8 @@ metadata:
     app.kubernetes.io/instance: external-secrets
     app.kubernetes.io/managed-by: Helm
     app.kubernetes.io/name: external-secrets
-    app.kubernetes.io/version: v0.10.4
-    helm.sh/chart: external-secrets-0.10.4
+    app.kubernetes.io/version: v0.10.5
+    helm.sh/chart: external-secrets-0.10.5
   name: external-secrets-controller
 roleRef:
   apiGroup: rbac.authorization.k8s.io
@@ -14094,9 +14118,9 @@ metadata:
     app.kubernetes.io/instance: external-secrets
     app.kubernetes.io/managed-by: Helm
     app.kubernetes.io/name: external-secrets-webhook
-    app.kubernetes.io/version: v0.10.4
+    app.kubernetes.io/version: v0.10.5
     external-secrets.io/component: webhook
-    helm.sh/chart: external-secrets-0.10.4
+    helm.sh/chart: external-secrets-0.10.5
   name: external-secrets-webhook
   namespace: external-secrets
 ---
@@ -14107,9 +14131,9 @@ metadata:
     app.kubernetes.io/instance: external-secrets
     app.kubernetes.io/managed-by: Helm
     app.kubernetes.io/name: external-secrets-webhook
-    app.kubernetes.io/version: v0.10.4
+    app.kubernetes.io/version: v0.10.5
     external-secrets.io/component: webhook
-    helm.sh/chart: external-secrets-0.10.4
+    helm.sh/chart: external-secrets-0.10.5
   name: external-secrets-webhook
   namespace: external-secrets
 spec:
@@ -14130,8 +14154,8 @@ metadata:
     app.kubernetes.io/instance: external-secrets
     app.kubernetes.io/managed-by: Helm
     app.kubernetes.io/name: external-secrets
-    app.kubernetes.io/version: v0.10.4
-    helm.sh/chart: external-secrets-0.10.4
+    app.kubernetes.io/version: v0.10.5
+    helm.sh/chart: external-secrets-0.10.5
   name: external-secrets
   namespace: external-secrets
 spec:
@@ -14147,8 +14171,8 @@ spec:
         app.kubernetes.io/instance: external-secrets
         app.kubernetes.io/managed-by: Helm
         app.kubernetes.io/name: external-secrets
-        app.kubernetes.io/version: v0.10.4
-        helm.sh/chart: external-secrets-0.10.4
+        app.kubernetes.io/version: v0.10.5
+        helm.sh/chart: external-secrets-0.10.5
     spec:
       automountServiceAccountToken: true
       containers:
@@ -14157,7 +14181,7 @@ spec:
         - --metrics-addr=:8080
         - --loglevel=info
         - --zap-time-encoding=epoch
-        image: oci.external-secrets.io/external-secrets/external-secrets:v0.10.4
+        image: oci.external-secrets.io/external-secrets/external-secrets:v0.10.5
         imagePullPolicy: IfNotPresent
         name: external-secrets
         ports:
@@ -14185,8 +14209,8 @@ metadata:
     app.kubernetes.io/instance: external-secrets
     app.kubernetes.io/managed-by: Helm
     app.kubernetes.io/name: external-secrets-cert-controller
-    app.kubernetes.io/version: v0.10.4
-    helm.sh/chart: external-secrets-0.10.4
+    app.kubernetes.io/version: v0.10.5
+    helm.sh/chart: external-secrets-0.10.5
   name: external-secrets-cert-controller
   namespace: external-secrets
 spec:
@@ -14202,8 +14226,8 @@ spec:
         app.kubernetes.io/instance: external-secrets
         app.kubernetes.io/managed-by: Helm
         app.kubernetes.io/name: external-secrets-cert-controller
-        app.kubernetes.io/version: v0.10.4
-        helm.sh/chart: external-secrets-0.10.4
+        app.kubernetes.io/version: v0.10.5
+        helm.sh/chart: external-secrets-0.10.5
     spec:
       automountServiceAccountToken: true
       containers:
@@ -14219,7 +14243,7 @@ spec:
         - --loglevel=info
         - --zap-time-encoding=epoch
         - --enable-partial-cache=true
-        image: oci.external-secrets.io/external-secrets/external-secrets:v0.10.4
+        image: oci.external-secrets.io/external-secrets/external-secrets:v0.10.5
         imagePullPolicy: IfNotPresent
         name: cert-controller
         ports:
@@ -14252,8 +14276,8 @@ metadata:
     app.kubernetes.io/instance: external-secrets
     app.kubernetes.io/managed-by: Helm
     app.kubernetes.io/name: external-secrets-webhook
-    app.kubernetes.io/version: v0.10.4
-    helm.sh/chart: external-secrets-0.10.4
+    app.kubernetes.io/version: v0.10.5
+    helm.sh/chart: external-secrets-0.10.5
   name: external-secrets-webhook
   namespace: external-secrets
 spec:
@@ -14269,8 +14293,8 @@ spec:
         app.kubernetes.io/instance: external-secrets
         app.kubernetes.io/managed-by: Helm
         app.kubernetes.io/name: external-secrets-webhook
-        app.kubernetes.io/version: v0.10.4
-        helm.sh/chart: external-secrets-0.10.4
+        app.kubernetes.io/version: v0.10.5
+        helm.sh/chart: external-secrets-0.10.5
     spec:
       automountServiceAccountToken: true
       containers:
@@ -14284,7 +14308,7 @@ spec:
         - --healthz-addr=:8081
         - --loglevel=info
         - --zap-time-encoding=epoch
-        image: oci.external-secrets.io/external-secrets/external-secrets:v0.10.4
+        image: oci.external-secrets.io/external-secrets/external-secrets:v0.10.5
         imagePullPolicy: IfNotPresent
         name: webhook
         ports:

k8s/operators/kube-prometheus/prometheus-patch.yaml

@@ -1,22 +1,3 @@
-- op: add
-  path: /spec/additionalScrapeConfigs
-  value:
-    key: scrape-configs.yaml
-    name: additional-scrape-configs
-    optional: true
-- op: add
-  path: /spec/secrets
-  value: [scrape-secrets]
-- op: add
-  path: /spec/externalUrl
-  value: https://prometheus.k8s.home.finn.io
-- op: add
-  path: /spec/thanos
-  value:
-    image: quay.io/thanos/thanos:v0.36.0
-    objectStorageConfig:
-      key: thanos.yaml
-      name: thanos-objstore
 - op: add
   path: /spec/storage
   value:
@@ -24,4 +5,26 @@
       spec:
         resources:
           requests:
-            storage: 20Gi
+            storage: 50Gi
+- op: add
+  path: /spec/additionalScrapeConfigs
+  value:
+    key: scrape-configs.yaml
+    name: additional-scrape-configs
+    optional: true
+- op: add
+  path: /spec/externalUrl
+  value: https://prometheus.k8s.home.finn.io
+- op: add
+  path: /spec/retention
+  value: 72h
+- op: add
+  path: /spec/secrets
+  value: [scrape-secrets]
+- op: add
+  path: /spec/thanos
+  value:
+    image: quay.io/thanos/thanos:v0.36.1
+    objectStorageConfig:
+      key: thanos.yaml
+      name: thanos-objstore

k8s/operators/kustomization.yaml

@@ -2,8 +2,9 @@ apiVersion: kustomize.config.k8s.io/v1beta1
 kind: Kustomization
 resources:
   - longhorn
-  - postgres-operator
   - cert-manager
-  - openbao
+  - external-secrets
   - kube-prometheus
+  - openbao
+  - postgres-operator
   - secrets-store-csi-driver

k8s/operators/longhorn/kustomization.yaml

@@ -3,7 +3,7 @@ kind: Kustomization
 namespace: longhorn-system
 resources:
   - https://github.com/longhorn/longhorn/releases/download/v1.6.2/longhorn.yaml
-  - secrets.yaml
+  # - secrets.yaml
   - backup.yaml
   - ingress.yaml
   - servicemonitor.yaml

k8s/operators/postgres-operator/kustomization.yaml

@@ -4,7 +4,7 @@ namespace: postgres-operator
 resources:
   - namespace.yaml
   - github.com/zalando/postgres-operator/manifests?ref=v1.13.0
-  - secrets.yaml
+  # - secrets.yaml
 configMapGenerator:
   - name: postgres-operator
     behavior: merge

k8s/shlink/shlink.yaml

@@ -18,7 +18,7 @@ spec:
         fsGroup: 1001
         fsGroupChangePolicy: "OnRootMismatch"
       containers:
-      - image: ghcr.io/shlinkio/shlink:4.2.2
+      - image: ghcr.io/shlinkio/shlink:4.2.5
         name: shlink
         resources: {}
         ports:

k8s/snipeit/statefulset.yaml

@@ -18,7 +18,7 @@ spec:
         fsGroupChangePolicy: "OnRootMismatch"
       containers:
       - name: snipe
-        image: snipe/snipe-it:v7.0.13
+        image: snipe/snipe-it:v7.1.14
         ports:
         - containerPort: 80
           name: web

roles/pdns/templates/powerdns-admin.env

@@ -2,12 +2,13 @@ SECRET_KEY={{ lookup('ansible.builtin.ini', 'pdns_admin_secret section=pdns file
 OIDC_OAUTH_ENABLED=true
 OIDC_OAUTH_KEY=powerdnsadmin
 OIDC_OAUTH_SECRET={{ lookup('ansible.builtin.ini', 'oidc_secret section=pdns file=secrets/' + inventory_hostname + '.ini') }}
-OIDC_OAUTH_API_URL=https://auth.janky.solutions/auth/realms/janky.solutions/protocol/openid-connect/
-OIDC_OAUTH_METADATA_URL=https://auth.janky.solutions/auth/realms/janky.solutions/.well-known/openid-configuration
-OIDC_OAUTH_LOGOUT_URL=https://auth.janky.solutions/auth/realms/janky.solutions/protocol/openid-connect/logout
+OIDC_OAUTH_API_URL=https://auth.janky.solutions/realms/janky.solutions/protocol/openid-connect/
+OIDC_OAUTH_METADATA_URL=https://auth.janky.solutions/realms/janky.solutions/.well-known/openid-configuration
+OIDC_OAUTH_LOGOUT_URL=https://auth.janky.solutions/realms/janky.solutions/protocol/openid-connect/logout
 OIDC_OAUTH_USERNAME=preferred_username
 OIDC_OAUTH_FIRSTNAME=given_name
 OIDC_OAUTH_LAST_NAME=family_name
 OIDC_OAUTH_EMAIL=email
+OIDC_OAUTH_SCOPE=openid email
 SIGNUP_ENABLED=false
 LOCAL_DB_ENABLED=false

roles/pdns/templates/powerdns-admin.service

@@ -5,6 +5,8 @@ Wants=network.target
 [Service]
 Type=simple
 ExecStartPre=/usr/bin/podman pull docker.io/powerdnsadmin/pda-legacy:latest
+ExecStartPre=-/usr/bin/podman stop powerdns-admin
+ExecStartPre=-/usr/bin/podman rm powerdns-admin
 ExecStart=/usr/bin/podman run --rm -v pda-data:/data -p 9191:80 --env-file /etc/powerdns-admin.env --name powerdns-admin docker.io/powerdnsadmin/pda-legacy:latest
 Restart=always